Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Leg Catch
$6.59
In Stock
- Fix Number:
- FIX9927406
- Manufacturer #:
- 242416-00
- Manufactured by:
- DeWALT
- Product Description
- This is a single OEM leg catch for workbenches. This part holds the leg on the workbench in the down position and locks it into the correct position. When it is released, the leg can raise back into the up position. If the legs of your workbench are wobbly or will not lock in place properly, a damaged leg catch is the likely culprit.
- Works with the following brands:
- Black and Decker
- Works with the following products
- Sawhorse
Product Description
This is a single OEM leg catch for workbenches. This part holds the leg on the workbench in the down position and locks it into the correct position. When it is released, the leg can raise back into the up position. If the legs of your workbench are wobbly or will not lock in place properly, a damaged leg catch is the likely culprit.
-
Works with the following brands:Black and Decker
-
Works with the following products:Sawhorse
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Philip
July 13, 2022
Is the leg catch easy to replace
For model number Workmate 200
Hello Phillip, thank you for your question. To remove the old leg catch, remove the pin securing it, position the new leg catch on the work bench and reinstall the pin to secure it. We hope this helps. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Roger from LIVONIA, MI
- Parts Used:
- 242416-00
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Replace broken leg catch
Punched out rod holding broken catch. Took it to bench grinder to taper ends when putting it back together after placing new leg catch on it. Tapering made it much easier on reinstall.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX9927406
Manufacturer Part Number: 242416-00
Manufacturer Part Number: 242416-00
Brand
Model Number
Description
✖
Mail-In Recycling Rebate