10166039-1-M-DeWALT-144960-00-Switch (On-Off)

( Grid squares measure 1x1 inch )

10166039-1-S-DeWALT-144960-00-Switch (On-Off)

10166039-1-S-DeWALT-144960-00-Switch (On-Off) 360 view

Switch (On-Off) 144960-00

Works With Model 2714!

★★★★★

1 Review

$4.99

Fix Number:: FIX10166039
Manufacturer #:: 144960-00
Manufactured by:: DeWALT

Works With Model 2714!

Product Description: This part includes one on-off switch, also referred to as a rocker switch. This switch is an original manufacturer replacement part. The switch controls the flow of electricity to the motor, and when it wears it can make it impossible to start the power tool. Switches are a common replacement part for power tools, so it is something that should be inspected as part of your regular maintenance. This black switch has two terminals and a compact design for an uncomplicated installation process. To confirm that the switch is damaged, you can test it for continuity using a multimeter.
Works with the following brands:: DeWALT, Black and Decker, Porter Cable
Works with the following products: Sander Polisher, Orbital or Palm Sander

Product Description Questions and Answers Related Parts Customer Reviews Model Compatibility

Product Description

This part includes one on-off switch, also referred to as a rocker switch. This switch is an original manufacturer replacement part. The switch controls the flow of electricity to the motor, and when it wears it can make it impossible to start the power tool. Switches are a common replacement part for power tools, so it is something that should be inspected as part of your regular maintenance. This black switch has two terminals and a compact design for an uncomplicated installation process. To confirm that the switch is damaged, you can test it for continuity using a multimeter.

Works with the following brands:

DeWALT, Black and Decker, Porter Cable
Works with the following products:
Sander Polisher, Orbital or Palm Sander

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Richard

November 20, 2021

How do you get it out?

For model number Black and Decker 7558

Hi Richard, Thank you for your question. Here are some instructions for removing and installing the switch. First remove the four screws holding the tool top on the body. Then pull the old switch out of the holder. Then remove the two wires from old switch and then remove the rubber dust hood off of the old switch. Install the rubber dust hood and the two wires onto new switch. Then insert the new switch into the holder and make sure that the wires are not sticking out. Then slip the tool top onto the body and make sure it fits the body tightly. Then reinstall the four screws. We hope this helps! If you have any questions, please let us know.

Was this helpful?