Brush and Lead
-
Product Description
This is a single carbon brush with lead and rubber sheath attached. If your motor is running poorly, intermittently, or the electric braking has failed, these are all signs of worn brushes. For this repair, you will need to remove the motor cap, pull the brush springs away from the brush, and pull the brushes away from the commutator. Use a pair of needle nose pliers to disconnect the wire lead connector from the holder.
-
Works with the following brandsDeWALT
-
Works with the following productsRouter
Product Description
This is a single carbon brush with lead and rubber sheath attached. If your motor is running poorly, intermittently, or the electric braking has failed, these are all signs of worn brushes. For this repair, you will need to remove the motor cap, pull the brush springs away from the brush, and pull the brushes away from the commutator. Use a pair of needle nose pliers to disconnect the wire lead connector from the holder.
-
Works with the following brands:DeWALT
-
Works with the following products:Router
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Manufacturer Part Number: 398139-01