Meat Drawer

Step 1: access electric plug and disconnect power from refrigerator. remove ice tray from freezer.
Step 2: loosen two upper 5/16 screws from ice maker, might need flashlight.
step 3: locate lower mounting screw (might need small mirror) and remove ice maker from side wall of freezer, Do Not use Force!
step 4: with care disconnect electrical connection to remove old ice maker. check the type of connector and if needed, install proper type as per enclosed instructions and provided connectors (3). remove bail arm and install on new ice maker.
step 5: connect wiring to refrigerator, ensure water trough goes thru plastic arch of ice maker and hang it on upper mounting screws.
Step 6: locate lower mount screw hole and install screw, do not tighten.
step 7 : using torpedo level, ensure ice maker is level and tighten the two upper screws, DO NOT USE HEAVY FORCE.
and then the lower screw.
Step 8: plug refrigerator back up, place ice tray back under ice maker,ensure bail is in lower location and once ice is made, discard the ice made 3X before using for drinks. enjoy!