Part Location Diagram of WP22002263 Whirlpool Light Bulb - 10W
See part 33 in the diagram
Replacing your Whirlpool Refrigerator Light Bulb - 10W
( Grid squares measure 1x1 inch )

Light Bulb - 10W WP22002263

Works With Model JUB248LBRS01!
★★★★★
★★★★★
1 Review

Rated by 11 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$16.30
In Stock
Fix Number:
FIX11739347
Manufacturer #:
WP22002263
Manufactured by:
Whirlpool
Works With Model JUB248LBRS01!

Product Description

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.

Videos For installing this part.

Replacing your Light Bulb - 10W

Replacing your Light Bulb - 10W

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 11 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
steve from POPLAR GROVE, IL
Parts Used:
WP8559751, WP3387747, WP22002263, 279973
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Dryer would not heat
Watched YouTube videos on how to diagnose and execute the repair. Always unplug the unit prior to performING any work. Diagnosed the heating element was bad. Easy to remove using only a 1/4" socket or nut driver. Decided to replace the thermal fuse and thermostat while I had the unit apart. To reassemble just reverse the steps. Very easy repair to complete yourself with little/no appliance knowledge. Good luck.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Myrtle Beach, SC
Parts Used:
WP22002263, 12001541, WP9703438
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dryer would squeek loudly
Removed door, and front bezel. Write the colors of the wires next to the door switch and the moisture sensor on the bezel so that you can remove the wires, this makes it easier. Lifted top up and pulled drum out, but did not remove belt. Inspected wheels and roller shaft. Needed to replace (2) Roller Wheels, (1) Roller Shaft, (2) Retainin g Rings, & (2) Shaft Washers. Ordered parts from the site. Removed the Retaining rings. The retaining ring tool I bought from the hardware store did not fit the holes in the retaining ring, so I had to file the tips down. Once the retaining rings are removed, the washers and rollers come off easily. The Roller Shaft can be removed by loosening the nut on the back side of the shaft. Inserted new shaft and tightened nut, then replaced both rollers, and washers, and reinstalled the Retaining rings. Put drum back in place, tied all wires back in and reinstalled front bezel and door.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert V from BELLEFONTE, PA
Parts Used:
WP3406107, WP22002263
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Dryer door switch was bad.
Replaced dryer door switch and replaced light bulb inside dryer.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeff G from Loomis, CA
Parts Used:
WP33001807, WP22002263, 306508
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Dryer was not drying cloths very well and hot air was leaking within the unit instead of venting out through the vent.
Follow the easy video instructions on the website! I pulled off the front cover and door, then the front cover of the drum while propping-up the top cover to get more room to work. Take the drive belt off by compressing the tension roller then slip the entire drum out the front. I drilled out the old rivets on the drum front cover and installed new pads as per the video. I then used a flat blade screw driver to open the metal tabs that hold the felt pads in place and removed the pads (on the front cover and inside the unit on the back cover). Pay attention to how they overlap on the ends because you want it correct so the drum does not rub the wrong way on the overlap as it spins. It spins clockwise as you look at the front of the machine. I used the screw driver to push the tabs back down as I held the felt in place and worked around each one to install it. A large flat blade works really well. When you put the drum back inside, you need to work your fingers (or use the screw driver) to make sure the felt pad is folded over on itself and the drum is seated. I found it helpful to have someone hold the drum up in position so the back pad stays well seated while I was putting the front support cover on and doing the same thing with the front felt pad. I also put the 2 screws in place (finger tight) to help hold the drum while I was making sure the felt pad was seated all the way around the front of the drum. Then I finished putting no the rest of the front cover (not the front panel yet) and then reinstalled the drive belt on the motor and tension roller. This take both hands because you have to reach around on both sides of the hot air vet to do this. Then reinstall the top cover, the front cover and door and your all set. The dryer now drys cloths very quickly like it did when we first bought it over 20 years ago. I had also replaced the drum rollers and the tension roller earlier but if you haven;t done this, i would do them at the same time when you have the drum out of the machine. They are inexpensive and easy to do when it's all apart anyway. It helps to reduce any noisy squeaks and makes it run nice and quiet like it did when new!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Stafford, VA
Parts Used:
WP22002263
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Light Bulb burned out
The only problem I had was seeing how to access the light bulb. With the model number I was able to locate the parts breakout in the drawing Door Shroud & Latch Assembly. In that drawing the light bulb is item 9. 1. You have to remove the cover by removing the screw item 13. Becareful not to drop the screw into the washer. 2. You have to unscrew the bulb and 3. install the new bulb. At this point you can see the new bulb light, confirming that the problem was a burned out bulb. 4. Replace the cover by reinstalling the screw item 13.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bonnie from Rio Rancho, NM
Parts Used:
WP22002263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Easy to screw in the New Bulb
First I locked the panel to prevent hitting the water lever. Screwed in the new bulb. Unlocked the panel and I had a new light. Very easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Pendleton, OR
Parts Used:
WP22002263, WP3406107, 279570
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Switch no longer allowed the dryer to run, door latch was worn and light was out.
I followed the instruction videos sent online for each item, with my order confirmation, to the letter. They were put forward in a way that made the process very easy to follow.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Mount Dora, FL
Parts Used:
WP22002263, WP3406107
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
no light, dryer would not shut off during cycle.
Opened top of dryer with putty knife. Unscrewed 3 wire switch. Had difficulty separating the male and female attachments from dryer (This took the most time. very tight). Replaced with new 3 wire door switch. Repositioned top of dryer. Replaced bulb. This process took approximately 15-20 mins. and was extremely easy and fast except fo r separating the two 3 wire connections.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard D Ford from LYONS, OH
Parts Used:
WP6-3700340, WPY312527, WP33002535, WP22002263
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
ldler pulley bearing wore out, making noise. belt came off.
Took front panel off then dryer tub and replaced pulley and belt. Put back together in reverse order.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from Bowling Green, OH
Parts Used:
W11035878, W10612022, WP22002263, WP691366, 349241T
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
drum making load noise when turned on
I removed drum from cabinet and noticed one of the drum support rollers was froze to spindle and wore down in one spot. Both front and rear drum seals were also worn. I ordered the parts and they arrived in 2days. The front drum seal was easy to install but not so much for the rear seal. I installed the rear seal before gluing bye clampin g the seal every foot with 6inch clamps, 5 total and then start gluing and moving the clamps, to one side. as needed. I have done several of these now and this is the best way I've found. Support rollers are easy just need a pair of pliers and a small flat head screw driver. Installing the belt over the drum bye yourself is not easy but can be done. There are several videos online that are a big help.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11739347
Manufacturer Part Number: WP22002263
Brand
Model Number
Description
Kenmore
10644102300
Refrigerator
Kenmore
10644103300
Refrigerator
Kenmore
10644109300
Refrigerator
Kenmore
10650212011
Refrigerator - REFRIGERATOR
Kenmore
10650343011
Refrigerator - REFRIGERATOR
Kenmore
10650522102
Refrigerator
Kenmore
10650524102
Refrigerator
Kenmore
10650532102
Refrigerator
Kenmore
10650534102
Refrigerator
Kenmore
10651042101
Refrigerator
Kenmore
10651044101
Refrigerator
Kenmore
10651049101
Refrigerator
Kenmore
10651062101
Refrigerator
Kenmore
10651064101
Refrigerator
Kenmore
10651069101
Refrigerator
Kenmore
10651103111
Refrigerator - REFRIGERATOR
Kenmore
10651252103
Refrigerator
Kenmore
10651252104
Refrigerator
Kenmore
10651254103
Refrigerator
Kenmore
10651254104
Refrigerator
Kenmore
10651259103
Refrigerator
Kenmore
10651259104
Refrigerator
Kenmore
10651262102
Refrigerator
Kenmore
10651262103
Refrigerator
Kenmore
10651262104
Refrigerator
Kenmore
10651262105
Refrigerator
Kenmore
10651264102
Refrigerator
Kenmore
10651264103
Refrigerator
Kenmore
10651264104
Refrigerator
Kenmore
10651264105
Refrigerator