Micro Switch

Repair was quite simple and fixed part of the problem...it does dispense water now but I'm afraid the driver for ice dispensing is locked u. That part is expensive and I'll forgo dispensing ice.

popped the switch off with a screwdriver and slipped it back on with my fingers

Followed the video suggested. Very straightforward, easy to follow. Put in the parts and the water dispenser was working.

The video did not make real clear that to remove the trim with the putty knife it was necessary to just pry the trim off with the putty knife.

I added a self adhesive pad to the push arm to make full contact with the micro switch. Thanks to your video, it was a quick fix!

Just like the video showed, the hardest part was getting the frame off first with the putty knife,then i removed the old micro switch and put the new on in and put it all back together and it still doesn't work.

My husband took out the old parts and replaced them with the new part.

Watched the video from web sight. Piece of cake. Very helpful looked like I knew what I was doing, all good. Unhooked the wires at the upper hinge on freezer door, removed front cover, unplugged harness, removed plastic bracket, switched light and switches to new bracket and put back together, done deal!!!!