This part is the replacement for the end cap on your refrigerator pantry drawer. Your pantry drawer will have two end caps; one for the right side and one for the left. This is the end cap for the right-hand side, and is sold separately from the left end cap. The part is made of white plastic and is an OEM part sourced directly from the manufacturer. To remove the old pantry drawer end cap, simply remove the pantry drawer and disconnect the end cap. Replace it with a new one, and slide the pantry drawer back into place.
Works with the following brands:
KitchenAid, Jenn-Air, Whirlpool, Maytag
Works with the following products:
Refrigerator
Fixes the following symptoms:
Door won’t open or close
Part# WPW10121977 replaces these:
AP6015354, W10121977
Works with the following brands:
KitchenAid, Jenn-Air, Whirlpool, Maytag
Works with the following products
Refrigerator
Fixes the following symptoms
Door won’t open or close
Part Number Cross Reference
Part# WPW10121977 replaces these:
AP6015354, W10121977
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
August 2, 2022
I have to replace the WPW10121977. I took everything out as I had seen on U-TUBE. However I do not see 1/4 inch HHCS or any screws holding the KitchenAid Refrigerator Drawer Support WPW10121977 to the wall of the refrigerator. I did not want to force it and cause damage. Any suggestions how I can remove?
For model number KFCS22EVMS8
Hello John, Thank you for your inquiry. We have researched the model number you have provided and there does seem to be a screw, part# FIX11747542, that holds the end cap in, they are recessed and hard to see sometimes. They come out with a hex head nut driver. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lichung
January 6, 2023
This is not a question, just a few replacement tips:
1. Watch a generic you tube video about how to replae the Whilpool right side end cap
2. There is no screw holes for WPW10121977, but there's tab in the center of the old drawer end cap that one can press/pull. Pull this tab and lift up on the front of the end cap then pulling it away from the back wall of the refrigerator
3. When installing the drawer, remove the drawer clear plastic cover first, install the drawer, then put the clear plastic cover back in.
For model number WPW10121977
Hi Lichung, thank you for getting in touch. We appreciate the replacement tips and insights and hope that they will also help others. Feel free to reach out if you have any queries.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
This is a replacement end cap for your refrigerator pantry drawer. The pantry drawer has an endcap on either side, which encloses the drawer. This end cap is for the left side of the pantry drawer only. Make sure you nee...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
The rh plastic hinge pin holding the deli drawer cover had sheared off on one side
Remove the deli drawer by lifting the back of the drawer to disengage the slides. Remove both crisper drawers by lifting the back of the drawer, the glass shelf below them, and the two retainer bars that hold the glass. There is a tab in the center of the old drawer end cap that one can press. Press this tab and lift up on the back of the
... Read more end cap while pulling it away from the back wall of the refrigerator (carefully!). The cooling mechanism at the back of the refrigerator will come away from the back wall with the end cap as it comes loose. (The end cap is secured by 4 square snap-in nylon posts mounted on the right refrigerator wall.) The cooling control piece inserts into a slot on its left side and it will lift out with the old end cap. Once the end cap is loose, remove the whole mechanism. The cooling control arm can be removed from the clips that hold it in a channel in the end cap and can be rotated to remove from the temp control knob at the front of the end cap. Remove the temp control arm and mechanism from the old end cap and set aside. Remove the metal slide by pushing the back tab down that keeps the metal piece on the slide from moving forward. I had to destroy the old panel to get the metal slide to release as it was stuck in place. Now you are ready to install the metal slide in the new end panel by sliding the metal tabs of the slide into the slots on the end cap until the retaining tab at the back clicks to hold it in. Remove the old temp control knob from the old panel and install it into the new panel. Connect the temp control arm to the control by rotating the arm so the elliptical tab fits into the control slot. Now you are ready to install the whole thing into the refrigerator, but you have to put the deli cover glass door into the two plastic pins ... one on each drawer end cap. This may take two people. Once the plastic pins are inserted into each side of the door, move the new end cap into place, supporting the temperature control baffle that goes on the back wall. Insert the temp control baffle tab on the lh side into the slot in the back wall of the refrigerator while moving the drawer end cap into place above the nylon retaining posts. With one motion, with the new end cap in place, push down on the end cap so that is snaps into place. Be sure to engage the plastic pieces on the back of the end cap into the slots on the back wall of the refrigerator. Replace the glass piece above the deli drawer with the two retaining bars and the two crisper drawers. Job is finished. It worked for me, but one has to go slow and be careful not to damage the plastic parts that are involved!!
A piece of the end cap had broken off while cleaning so that the drawer did not close on its own.
We had no instructions so we dismantled things piece by piece photographing each step. We used the pictures to reassemble it. The final piece, the drawer cover was not very flexible so take your time.
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11748630
Manufacturer Part Number: WPW10121977
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
