Ratings submitted by customers like you who bought this part.
?
$40.84
In Stock
Fix Number:
FIX11738568
Manufacturer #:
WP12656018
Manufactured by:
Whirlpool
Works With Model JFC2089HES!
Product Description
This genuine OEM part is an end cap used to support the pantry drawer in your refrigerator. This end cap is for the right side as if you were standing facing towards the appliance. The end cap mounts onto the refrigerator wall, and if it has become damaged it should be replaced.
This genuine OEM part is an end cap used to support the pantry drawer in your refrigerator. This end cap is for the right side as if you were standing facing towards the appliance. The end cap mounts onto the refrigerator wall, and if it has become damaged it should be replaced.
Works with the following brands:
KitchenAid, Jenn-Air, Whirlpool, Maytag
Works with the following products:
Refrigerator
Fixes the following symptoms:
Door won’t open or close, Fridge too cold
Part# WP12656018 replaces these:
AP6005519, 12656009, 12656011, 12656012, 12656018, 12656020
...
Show more, 12656021, 67002325, 67003047, 67004725, 67005677, 67005857, 67005859, 67005860, 8171063, 8208282, WP12656020 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
December 31, 2021
Will this work in my fridge?
For model number Wrf535swhz04
Hello Michael, thank you for your question. No, the part you had chosen is not compatible for your model. The correct part for your model number is FIX11738134 and is sold as a kit of Left and Right hand sides. We have an installation video for you to access. We hope to hear from you soon.
This pantry end cap is a genuine OEM replacement part for your refrigerator. Also known as a drawer support, it is used to hold the rails and shelving for your pantry and crisper drawers. This specific piece is for the l...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Right side end cap - Pin for wide drawer cover broke
Remove the two vegetable drawers - Remove the glass above including the support strip across the front - Remove the full width drawer under the two vegetable drawers - This allows total accessibility for the replacement work - Remove the metal glide from the side cap first (2 screws) then remove the side cap (2 screws). Swing the side ca
... Read morep toward the center of the fridge as you free it from the two tabs in the back corner. Then pull the left end of the crisper bar that has a tab from the slot in the back panel. Remove and work on your counter top. You have to disassemble the slide mechanism and the crisper attachment for the "crisper" setting. Take your time so as not to break the "tabs". After reinstalling the crisper and slide bar assy to the new side cap put the tab on the end of the crisper bar back into the rear panel of the fridge. Engage the two tabs at the back of the end cap into the slots and hold the side cap against the side fridge panel as you engage the two screws. Then reattach the metal glide with two screws. THEN reinstall the glass and support strip - THEN the lower drawer - THEN the two vegetable drawers. NOTE: When ordering the new side cap be careful to make sure that the one you are ordering is the correct length!!! Use the grid marks on the picture to determine the length versus what you measure on your broken piece - This is a "sanity" check on the part number you believe you need. I had to return a shorter piece and reorder the longer correct one. Good Luck
Plastic right hand hook on the deli drawer top had broken.
My husband watched the instruction video on the website and that made it so easy to change the right side end cap. You have to take the track off which was easy to remove and put back on the new part. So happy that it saved us so much money and it was an easy repair.Thank You
The instruction video is for the left cap, which is very simple; the video should be for the right cap, in my opinion, because it's more complicated as a result of the air vent linkage. To disassemble the linkage, the two clips at the right angle at the back end of the right end cap have to be depressed to get the linkage out of its clip
... Read mores. Then it can be taken apart without breaking it.
This repair was fairly quick and easy. Just removal of bottom three drawers, disassemble old pantry end cap by unscrewing a few screws; replace with new end cap, reassemble and your done!
Replacing the old internal parts to new replacment part
Remove crisper drawers, glass shelf and defective part. disassemble parts and then replace into new part. Replace all parts back in refrigerator. Time to do this about 45 minutes on right side.
1.remove all drawers. 2. remove 3 screws 3. remove end cap and piece attached to back 4. remove drawer slides and install on new end cap 5. remove remaining piece and install on new end cap 6. reinstall new end 7. replace drawers. 8. done
Simply removed drawers and 3 bolts holding broken part. Disconnected air flow channel and attached it to new part. Bolted replacement into place and replaced drawers. Very fast and easy.
Water leaking from bottom freezer due to freeze up in condensate line.
Unplugged refrigerator, removed back lower panel screws with 3/8 nut driver. Removed wiring harness from back panel and layed panel aside. Easily removed "Duck Bill" rubberized drain plug from drain opening. Plug was totally clogged with gunk, not allowing any water into drain, causing the ice-up inside of freezer. With small regular tip
... Read moreped screwdriver pushed in bottom clip locking in drain tube. Must do this gingerly so as not to damage plastic drain pan. Removed old drain tube and replaced with new aftermarket drain assembly ordered from this site. Used hair dryer on low setting to thaw ice in rear of freezer unit. In less than 10 minutes the thawed ice water ran smoothly out new aftermarket drain assembly. Problem solved.
The guide pin, which opens the pantry lid broke off
The instructions you sent were totally helpful but we failed to read to the end before we started the install. It is much easier if one unscrewed the temperature slider, as it allows disengage the temperature slide making the removal of the broken part easier. Move that instruction up to the top. We are feeling very acco,plished. Thank yo
... Read moreu....
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
★
Customer Reviews
Average Rating:
(1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
1
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Matthew R - June 2, 2021
Verified Purchase
Fridge part
This was the right part and I already installed it
Model Compatibility
This part works with the following models:
Fix Number: FIX11738568
Manufacturer Part Number: WP12656018
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.