Icemaker Control Assembly

I initially replaced the water inlet valve, but that did not correct the problem. Replacing the icemaker control did. I removed the icemaker assembly by unscrewing the 3 nuts with a socket wrench and unplugging the icemaker assembly. I snapped off the white end piece, unscrewed the 3 screws, & removed the old icemaker control. I installe ... Read more d the new unit with a Phillips screwdriver, replaced the icemaker, plugged it in, and tightened the 3 bracing screws. The unit began making ice in one hour.

Repair went just as described in the video....very helpful!

The website diagnosed this part was the most failed part for making ice. Ordered the part watched the video from the website and it was a snap to replace. When I first replaced the control assembly the ice maker didnt cycle right away, but after 30 mins or so it began making ice again. Quick easy fix and Sears should change their r ... Read more epair service to Replace Service. I had them come out paid them 99 bucks to tell me the ice maker wasn't working , duh, and then told me 300 bucks to replace it. Guess i should have go on the web first.

Checked Water valve operation. Replaced Control module happened Easy fix following replacement guide on website.

tested control decided that controller was bad installed new controller back in business

checked instructions on Utube, it was necessary to get all air out of water line before ice maker made ice.

3 screws and I put the new one in and it worked perfectly.

Look at the video to see how to repair and then repaired my ice maker within 30 minutes

The troubleshooting tips from this site helped me select the part and their service guide helped. To get the correct dis-assembly/assembly instructions I went to the SEARS web site. SEAR does not help with troubleshooting. Between the two my ice maker is now working again!

Watched your tutorial, which was clear and concise, and did it step by step myself. Easy peasy.