Part Location Diagram of WP67003426 Whirlpool Defrost Thermostat
See part 14 in the diagram
Replacing your Kenmore Refrigerator Defrost Thermostat
( Grid squares measure 1x1 inch )

Defrost Thermostat

Rated by 1 customers 

?

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$55.59
In Stock
Fix Number:
FIX11743535
Manufacturer #:
WP67003426
Manufactured by:
Whirlpool

Product Description

This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

Videos For installing this part.

Replacing your Defrost Thermostat

Replacing your Defrost Thermostat

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.3 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Walter from Gouldsboro, PA
Parts Used:
WP67003426
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Refrigerator not cold enough..Freezer OK
Read all the repairs on line for this problem; not only in this web sight but others,. No one shows it all. Use a 1/4 inch ratchet set. Only loosen screws for the door removal, it then slides right up. Remove lowest vent under door you have to raise the feet with the ratchet to slide the refrig out. Also vacuum coils n here before yo u move the unit (you'll also solve about half your problem). Remove lower basket and screws in front of top basket. Now you have a bitch of a problem. There are two vertical retainers which must be pushed away from the top basket on each side while you push up to allow the gears to disengage the track. Good Luck. After this the video takes you through step by step. Keep all the screws removed separate, they are not all the same. The top front screw on the ice maker does not have to be removed all the way, remove the others and push up on the unit. Top vent has the first clip in the top right slot and bottom center for the second. Everything else is covered. Remember brown goes to brown and orange goes to orange. If you never spliced wires before, practice before; you'll be working on your back and looking up in an uncomfortable position. Everything goes back together in half the time you take it apart..
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11743535
Manufacturer Part Number: WP67003426
Brand
Model Number
Description
Kenmore
59665232400
Refrigerator
Kenmore
59665232401
Refrigerator
Kenmore
59665232402
Refrigerator
Kenmore
59665234400
Refrigerator
Kenmore
59665234401
Refrigerator
Kenmore
59665234402
Refrigerator
Kenmore
59665239400
Refrigerator
Kenmore
59665239401
Refrigerator
Kenmore
59665239402
Refrigerator
Kenmore
59665262700
Refrigerator
Kenmore
59665264700
Refrigerator
Kenmore
59665269700
Refrigerator
Kenmore
59665332600
Refrigerator
Kenmore
59665333700
Refrigerator
Kenmore
59665339700
Refrigerator
Kenmore
59665932300
Refrigerator
Kenmore
59665932400
Refrigerator
Kenmore
59665932401
Refrigerator
Kenmore
59665932402
Refrigerator
Kenmore
59665934300
Refrigerator
Kenmore
59665934400
Refrigerator
Kenmore
59665934401
Refrigerator
Kenmore
59665934402
Refrigerator
Kenmore
59665939300
Refrigerator
Kenmore
59665939400
Refrigerator
Kenmore
59665939401
Refrigerator
Kenmore
59665939402
Refrigerator
Kenmore
59665962700
Refrigerator
Kenmore
59665964700
Refrigerator
Kenmore
59665969700
Refrigerator