Part Location Diagram of WP628356 Whirlpool Water Fill Cup and Bearing
See part 2 in the diagram
Replacing your Kenmore Refrigerator Water Fill Cup and Bearing
( Grid squares measure 1x1 inch )

Water Fill Cup and Bearing WP628356

Works With Model ATB1710DRW!
★★★★★
★★★★★
1 Review

Rated by 1 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$40.29
In Stock
Fix Number:
FIX11743318
Manufacturer #:
WP628356
Manufactured by:
Whirlpool
Works With Model ATB1710DRW!

Product Description

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

Videos For installing this part.

Replacing your Water Fill Cup and Bearing

Replacing your Water Fill Cup and Bearing

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Anthony from West Jordan, UT
Parts Used:
WP628356
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Replace Fill cup
Sadly, although it appears you could just snap the fill cup into the groove on the tray, this is not the case. You must remove and disassemble the ice tray assembly to replace this small part. Luckily, this is not terribly difficult. Here are the steps: 1-Remove hex-screw on bottom of ice tray assembly, and loosen two screws on top. 2- Lift assembly off top screws to remove from side of freezer. 3-Unplug power cord. 4-Unsnap front cover on front of unit. 5-Remove ice make motor by removing the screws on front of the unit. 6-Remove Motor Housing by removing the tow recessed screws toward the bottom. 7-Now the ejector arm should be free. Slide it forward from the groove in the ice tray. 8-Remove old fill cup from ejector arm, and slide new fill cup onto it. 9-Reassemble ice tray assembly reversing the steps above.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11743318
Manufacturer Part Number: WP628356
Brand
Model Number
Description
Kenmore
1061118553
Ice Maker
Kenmore
1061118555
Ice Maker
Kenmore
1062155184
Ice Maker
Kenmore
10641522500
Refrigerator
Kenmore
10641523500
Refrigerator
Kenmore
10641524500
Refrigerator
Kenmore
10641529500
Refrigerator
Kenmore
1064211173
Ice Maker
Kenmore
1064317943
Ice Maker
Kenmore
10644022600
Refrigerator
Kenmore
10644022601
Refrigerator
Kenmore
10644022602
Refrigerator
Kenmore
10644022603
Refrigerator
Kenmore
10644023600
Refrigerator
Kenmore
10644023601
Refrigerator
Kenmore
10644023602
Refrigerator
Kenmore
10644023603
Refrigerator
Kenmore
10644024600
Refrigerator
Kenmore
10644029600
Refrigerator
Kenmore
10644029601
Refrigerator
Kenmore
10644029602
Refrigerator
Kenmore
10644029603
Refrigerator
Kenmore
10644032600
Refrigerator
Kenmore
10644032601
Refrigerator
Kenmore
10644032602
Refrigerator
Kenmore
10644032603
Refrigerator
Kenmore
10644033600
Refrigerator
Kenmore
10644033601
Refrigerator
Kenmore
10644033602
Refrigerator
Kenmore
10644033603
Refrigerator