Water Fill Cup and Bearing
$40.54
In Stock
Fix Number: FIX11743318
Manufacturer #: WP628356
Manufactured by:
Whirlpool
-
Product Description
This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.
-
Works with the following brandsKenmore, Whirlpool, Amana, KitchenAid
-
Works with the following productsRefrigerator, Ice Maker, Freezer
-
Fixes the following symptomsIce maker not making ice, Leaking, Ice maker dispenses too much ice, Ice maker won’t dispense ice
-
Part Number Cross ReferencePart# WP628356 replaces these:AP6010142, 0056596, 0312737, 14211506, 2155035, 627791, 628356, 8170928, 95100-1, R0156627, R0156839, Y0056596, Y0312737
Product Description
This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.
-
Works with the following brands:Kenmore, Whirlpool, Amana, KitchenAid
-
Works with the following products:Refrigerator, Ice Maker, Freezer
-
Fixes the following symptoms:Ice maker not making ice, Leaking, Ice maker dispenses too much ice, Ice maker won’t dispense ice
-
Part# WP628356 replaces these:AP6010142, 0056596, 0312737, 14211506, 2155035, 627791 ... Show more , 628356, 8170928, 95100-1, R0156627, R0156839, Y0056596, Y0312737 Show less
Videos For installing this part.
Replacing your Water Fill Cup and Bearing

Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Anthony from West Jordan, UT
-
Parts Used:WP628356
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Replace Fill cup
Sadly, although it appears you could just snap the fill cup into the groove on the tray, this is not the case. You must remove and disassemble the ice tray assembly to replace this small part. Luckily, this is not terribly difficult. Here are the steps: 1-Remove hex-screw on bottom of ice tray assembly, and loosen two screws on top. 2-Lift assembly off top screws to remove from side of freezer. 3-Unplug power cord. 4-Unsnap front cover on front of unit. 5-Remove ice make motor by removing the screws on front of the unit. 6-Remove Motor Housing by removing the tow recessed screws toward the bottom. 7-Now the ejector arm should be free. Slide it forward from the groove in the ice tray. 8-Remove old fill cup from ejector arm, and slide new fill cup onto it. 9-Reassemble ice tray assembly reversing the steps above.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Paul M - August 25, 2021
Verified Purchase
water fill cup
Easy to remove and install new fill cup, but at $ 35. kinda of pricey for a plastic cup. Part arrived promptly and online video was extremely helpful.
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11743318
Manufacturer Part Number: WP628356
Manufacturer Part Number: WP628356
Brand
Model Number
Description