Part Location Diagram of WP2252130 Whirlpool Ice Auger Drive Motor
See part 29 in the diagram
( Grid squares measure 1x1 inch )

Ice Auger Drive Motor WP2252130

Rated by 3 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$156.87
In Stock
Fix Number:
FIX11739848
Manufacturer #:
WP2252130
Manufactured by:
Whirlpool

Product Description

This motor rotates the auger. When the auger rotates, it pushes ice out of the bin, through a chute to the user.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.4 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
CLIFF from MARTINEZ, GA
Parts Used:
WP2305242, WP2305243, WP2252130
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Ice Maker would not dispense ice
First remove the ice container then for safety unplug the fridge. Unscrew the two screws behind tray then unplug wire at the panel to give more work room. Unscrew two screws that hold the door bracket and activator motor. I was afraid of breaking the plastic tabs on bracket for the door and removed the activator motor to get the old con nector off. After many failed attempts to get the motor back on with the connector in place. I got bold enough to pop the door off the bracket. That made it very east to reinstall the motor, put new door bracket in place and pop the ice door into the holder then screw assembly into place. I first removed the two screws holding the top fitting which connects to Ice Auger, remove the assembly and the drive shaft. Retain spring and other parts. The Ice Auger Drive Motor is mounted to a bracket and you first must remove the four screws holding the bracket to be able to get to the motor and remove the four screws holding it into place. Disconnect and remove the motor. A thin flat screwdriver and needle nose pliers will help unplug the electric fitting. Watch for a flexible washer that the axel goes through at the motor. Mine was stuck to the frame until I put the motor back in. It dislodged just enough that I could not get the axel through it and into the motor. Pulled out the new axel, unscrewed the motor bracket and pulled motor out. Holding the washer, reinserted axel from the top and pushed it through the washer, then set it in motor as I put bracket back in place. Reinstalled top fitting and parts then reconnected front panel, plugged fridge in and all worked well. It was not hard and if I had instructions for the ice door bracket it would have been just over 30 min total for all parts.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from JONESBOROUGH, TN
Parts Used:
WP2252130
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Ice maker stopped working and touch screen circuit board failed. That was my fault!
Unplug the refrigerator.

Removed pullout tray

Removed 2 screws

Pull on bottom of the despensor unit while gently lifting up. Don't force anything made of plastic or else you will be buying a new one!

When you have it pulled away from the door carefully disconnect ground wires then power wires!< br />
Remove connections to the circuit boards and pop out plastic connector's for ribbon connectors, remember how they came out because they only fit in the exact same way! You cant flip them around. If you do the ribbon will not seat properly and the control panel will not work correctly. Trust me I know! Had to repeat the process and make sure the black ribbon connector holders where correctly installed. They must pop in, if done correctly they push in with little effort!

Carefully remove old circuit board, don't force this plastic it will crack!

Remove new one from static bag do not touch the connectors, your body has thousands of volts super low amps and you will fry the board if you touch the connector unless your working on an ESD mat. Or properly grounded. Was in the Marines and worked helicopter avionics.

Anyway, carefully install the new board and reconnect. If you don't have a photographic memory use you phone because it does! Takes pictures of the disassembly process and follow your pic''s. Last things, don't forget to clean the dust from the coil while you have the fridge out from the wall. Now plug it back in!! Done!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Pilot, VA
Parts Used:
WP2252130
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
I've would not dispense
Opened front of ice maker pulled out tray removed two Phillips head Removed face plate unbolted auger from inside and pulled out. Went back to front removed auger motor put in new one inserted auger back from inside. Motor simply bolts in with a plug in. Works great
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11739848
Manufacturer Part Number: WP2252130
Brand
Model Number
Description
Kenmore
10644022600
Refrigerator
Kenmore
10644023600
Refrigerator
Kenmore
10644024600
Refrigerator
Kenmore
10644029600
Refrigerator
Kenmore
10644032600
Refrigerator
Kenmore
10644033600
Refrigerator
Kenmore
10644034600
Refrigerator
Kenmore
10644039600
Refrigerator
Kenmore
10654202300
Refrigerator
Kenmore
10654203300
Refrigerator
Kenmore
10654204300
Refrigerator
Kenmore
10654206300
Refrigerator
Kenmore
10654209300
Refrigerator
Kenmore
10654212300
Refrigerator
Kenmore
10654213300
Refrigerator
Kenmore
10654214300
Refrigerator
Kenmore
10654216300
Refrigerator
Kenmore
10654219300
Refrigerator
Kenmore
10654782800
Refrigerator
Kenmore
10654783800
Refrigerator
Kenmore
10654784800
Refrigerator
Kenmore
10654786800
Refrigerator
Kenmore
10654789800
Refrigerator
Kenmore
10654792800
Refrigerator
Kenmore
10654793800
Refrigerator
Kenmore
10654794800
Refrigerator
Kenmore
10654796800
Refrigerator
Kenmore
10654799800
Refrigerator
Kenmore
10655202400
Refrigerator
Kenmore
10655203400
Refrigerator