Ice Stripper WP2182124
Works With Model LTF2112ARW!
$63.62
In Stock
- Fix Number:
- FIX11739041
- Manufacturer #:
- WP2182124
- Manufactured by:
- Whirlpool
Works With Model LTF2112ARW!
Jump to:
Product Description
This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.
-
Works with the following brands:Kenmore, Amana, Whirlpool, Maytag
-
Works with the following products:Refrigerator, Ice Maker, Freezer
-
Fixes the following symptoms:Ice maker not making ice, Ice maker won’t dispense ice
-
Part# WP2182124 replaces these:AP6005979, 0312742, 14214059, 2182124, 627788, 8170929 ... Show more , 95102-1, R0183120, Y0312742 Show less
- Works with the following brands:
- Kenmore, Amana, Whirlpool, Maytag
- Works with the following products
- Refrigerator, Ice Maker, Freezer
- Fixes the following symptoms
- Ice maker not making ice, Ice maker won’t dispense ice
- Part# WP2182124 replaces these:
- AP6005979, 0312742, 14214059, 2182124, 627788, 8170929, 95102-1, R0183120, Y0312742
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice Stripper broken
First off, I went to this site page to see what part I needed. I took the ice maker out and replaced the parts. It took me about 15 minutes, and I have no experience with appliance repairs. Very Easy and if I can do it, anyone can.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andrew from COLORADO SPRINGS, CO
- Parts Used:
- WP2182124
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Ice Stripper broken off of the ice maker causing old ice cubes to block the new ice from falling off ice maker into bin
obtained part and verified its the same as the original. Attempted to snap it in place onto the front of the ice maker and discovered the broken piece of the old stripper was stuck in the ice maker. could not pull it out as its physically embedded into the ice maker and held in place by the assembly. Unplugged Fridge, Removed icemaker un
... Read more
it by removing 3 screws holding it in place by using 1/4 nut driver. unplugged wires from ice maker using small slot screwdriver to release the plug. Removed from freezer and plugged the refrigerator back in while I worked on the icemaker. Removed(pops off easily) outside plastic end cap of icemaker to get to components, Removed 3 screws holding electrical and motor assembly. Removed 2 screws holding header to water tray, once it was apart the old fragment fell out and the new stripper went into place easy. installing components in reverse order resulted with the new stripper locked into the assembly. Reinstalled ice maker and it worked fine.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jackie from Keller, TX
- Parts Used:
- WP2182124
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Ice Stripper Had Broken Into Several Pieces.
I first removed all food from the freezer in the immediate area to more work room. 1. Following the instructions I disconnected electrical supply. 2. Removed ice tray. 3. I loosened the mounting screws with nut driver. 4. Removed from wall and disconnected wiring harness. 5. Removed cover exposing access to phillips screw heads
... Read more
. 6. Separated motor from freeze tray and stripper. 7. Replaced damaged part and reassembled in reverse order. Works perfect !!!
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11739041
Manufacturer Part Number: WP2182124
Manufacturer Part Number: WP2182124
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.