GE/GE_Thumb/00120714i05.gif
See part 350 in the diagram
Replacing your General Electric Refrigerator Ice Bucket Auger play video
( Grid squares measure 1x1 inch )

Ice Bucket Auger

$63.75
Fix Number: FIX964350
Manufacturer #: WR17X11705
Manufactured by: GE

Product Description

If the ice maker in your fridge is noisy or no longer dispensing ice, there may be an issue with the auger in the ice bucket. The auger works by spinning to pull and dispense ice from the bin down the ice chute and into your glass. Regular use of the auger over time can cause it to wear down, and if ice is allowed to build up it can also cause the auger to break. When replacing this part, you will need to remove the entire icemaker assembly from your freezer. Be sure to turn the ice maker off before beginning this repair. As the ice maker assembly is made of plastic, we suggest allowing it to warm up before starting any work, to prevent cracking and further damage. This is a genuine OEM part and is made of clear plastic and metal.

Videos For installing this part.

Replacing your Ice Bucket Auger

Replacing your Ice Bucket Auger play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.5 / 5.0, 31 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Calvin from Klamath Falls, OR
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
auger broken
All the same as the video, except on mine the tabs didn't push in, they are solid. Had to pry open the sides of sides of panel and jimmy the ice crusher housing out, a little at a time, one side and the other, till it came out.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Charles from Mystic, CT
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Ice auger replacement
The ice choppers were very much attached to the auger as I was advised in a similar post. Used vice grips as suggested and removed the choppers and was very careful to keep them all together. After that, it wasn't too bad to put it all back together. Might consider just replacing the entire drawer in the future.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Charles from Wichita, KS
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Broken Ice maker Auger
Printed written instructions. Had difficulty as they omitted using a putty knife to push in the cover retaining tabs (the most difficult part of the job). I then found the video and it was very easy to follow the tabs were still very hard to keep pushed in , they kept popping back. Persistence paid off. Video was the way to go.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Phillip from Kaufman, TX
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Auger had broke, needed to replace
The order confirmation email contained a link to a video showing step by step how to perform the replacement. I down loaded it to a tablet computer and stopped and restarted and reviewed as needed to properly replace the part. Without that video, I am uncertain of success, but if successful, would have been a much more stressful job.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    James from Middle Village, NY
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
Ice Auger cracked
I followed the video on the website. It was well done and explained everything that I needed to do to replace the part.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Gary from Alvin, TX
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Followed video instructions.
Followed video instructions.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Edward from Rolesville, NC
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Broken blades on auger
I followed the video instructions. Perfect instructions
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Larry from OXON HILL, MD
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
broken auger
watched the video as I made the change.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kenneth from Lincoln, TX
  • Parts Used:
    WR17X11705
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Broken Ice Bucket Auger Blade
I watched the video your order site supplied. The most difficult part of the installation was removing the housing for the auger. The video explains this very good. Took about 30 minutes to complete.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Raymond from Tarpon Springs, FL
  • Parts Used:
    WR17X11705, WR17X11497
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Replace Ice bucket auger and dispenser cover
We watched the video on the web site which made the repair very easy. The parts came fast the web site is great and we would use them again. Great way to do the repair yourself
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX964350
Manufacturer Part Number: WR17X11705
Brand
Model Number
Description
General Electric
A4425GDTABB
Refrigerator
General Electric
A4425GDTAWW
Refrigerator
General Electric
A4425GDTBBB
Refrigerator
General Electric
A4425GDTBWW
Refrigerator
General Electric
BSS25GFPACC
Refrigerator
General Electric
BSS25GFPAWW
Refrigerator
General Electric
BSS25GFPCCC
Refrigerator
General Electric
BSS25GFPCWW
Refrigerator
General Electric
BSS25GFPDCC
Refrigerator
General Electric
BSS25GFPDWW
Refrigerator
General Electric
BSS25GFPECC
Refrigerator
General Electric
BSS25GFPEWW
Refrigerator
General Electric
BSS25GFPHCC
Refrigerator
General Electric
BSS25GFPHWW
Refrigerator
General Electric
BSS25JFRFWW
Refrigerator
General Electric
BSS25JFRJWW
Refrigerator
General Electric
BSS25JFTAWW
Refrigerator
General Electric
BSS25JFTBWW
Refrigerator - T Series
General Electric
BSS25JFTCWW
Refrigerator - T Series
General Electric
BSS25JFTDWW
Refrigerator
General Electric
BSS25JFTEWW
Refrigerator - T Series
General Electric
BSS25JFTGWW
Refrigerator
General Electric
BSS25JFTHWW
Refrigerator
General Electric
BSS25JFTIWW
Refrigerator
General Electric
BSS25JFTJWW
Refrigerator
General Electric
BSS25JFTNWW
Refrigerator
General Electric
BSS25JFTPWW
Refrigerator
General Electric
BSS25JSRFSS
Refrigerator
General Electric
BSS25JSRJSS
Refrigerator
General Electric
BSS25JSTASS
Refrigerator