Part Location Diagram of WR09X10106 GE Overload/ptc - 5 speed
See part 735 in the diagram
( Grid squares measure 1x1 inch )

Overload/ptc - 5 speed WR09X10106

Rated by 2 customers 

?

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$47.82
In Stock
Fix Number:
FIX963864
Manufacturer #:
WR09X10106
Manufactured by:
GE

Product Description

This part helps protect the motor from overheating.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Ron from Chester, PA
Parts Used:
WR55X24065, WR09X10106
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
light was working, but compresser not turning on.
Replaced 5 speed overload and capacitor. the refrigerator started right up and runs great.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnie Rey from Woodside, NY
Parts Used:
WR09X10106
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Clicking noise in the compressor start device (freezer blowing warm air)
First things first, unplug the refrigerator from outlet then using a flat head screw driver to remove the screw of the cardboard cover then using long nose plier remove the clip of the start device then slowly pry the device using the flat head screw driver to remove from the compressor pin (make it sure you're not bending the 3 pin in t he compressor) Once already remove? use again the screw driver to pry the black capacitor in order to remove from the old start device/relay(note do not short the capacitor slowly pry side by side never allow the screw driver to touch the 2 capacitor pin it might be still have stored power) then insert it to the new one and install the entire device back to the compressor secure the device with the clip. Before you close up make it sure it working by simply plug it back the refrigerator to the outlet then wait 5 minutes after 5 minutes open the freezer door you should have a cold air by now. If so then put back in place the cardboard cover and your done...
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX963864
Manufacturer Part Number: WR09X10106
Brand Model Number Description
General Electric 36211XBMERWW Refrigerator
General Electric 36211XBRERWW Refrigerator
General Electric 36411XBRERWW Refrigerator
General Electric 37511KBSARWW Refrigerator
General Electric 37511KBSERWW Refrigerator
General Electric 38341FBMERWW Refrigerator
General Electric 38351HBMERWW Refrigerator
General Electric 38351HBRERWW Refrigerator
General Electric 38451HBRERWW Refrigerator
General Electric 38471PBRVRWW Refrigerator
General Electric 38481KBRDRWW Refrigerator
General Electric 38481KBRKRWW Refrigerator
General Electric 38481KBRTRWW Refrigerator
General Electric 38481KBRVRWW Refrigerator
General Electric 38485KBRDRBB Refrigerator
General Electric 38485KBRKRBB Refrigerator
General Electric 38485KBRTRBB Refrigerator
General Electric 38485KBRVRBB Refrigerator
General Electric 38487KBRDRCC Refrigerator
General Electric 38489KBSVRSS Refrigerator
General Electric A3315ABRERWW Refrigerator
General Electric A3316ABSERBB Refrigerator
General Electric A3316ABSERWW Refrigerator
General Electric A3317ABRERWW Refrigerator
General Electric CTS16ABMERWW Refrigerator
General Electric CTS16ABRERWW Refrigerator
General Electric CTS17RBSERWW Refrigerator
General Electric CTS18ABMERWW Refrigerator
General Electric CTS18ABRERWW Refrigerator
General Electric CTS18FBSELWW Refrigerator