Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
August 16, 2022
Does this coupler come in a 5/16" and I also need a 5/16" finger nut.
For model number GSS25LSLLCSS
Hello Roger, Thank you for the question. Yes this Water Union Coupler is 5/16" however this union is not listed for your model. The Union for your model is Fix Number: FIX758446 Union Connector. Sadly, the Finger Nut you are requesting we do not have listed for your model. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps!
This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you may have a damaged w...
Note: That this repair was done on the old design with the threaded connections on the inlet water valve. The replacement valve has compression fittings. 5/16 water line gave up at the water inlet valve. First fixed 2yrs ago. was able to cut off enough damaged line and pull out the slack and got it back in and socked it down no leaks. 2nd leak this time same brittle old line gave up again. Replaced the 5/16 line. from inlet valve. I cut the head off a bolt that barely fit in both old and new tube ends. Removed tube guide inside behind bottom bin and pulled old line until new line showed up spliced in union. Did have to remove inlet water valve this time to assure good connection. Because you can't buy a new 5/16 nut for that valve you have to make the old one work or you might be forced to buy a new inlet valve too. At which point the 1/4 ice line gave up. Repeated fix #1 on 1/4 line. reinstalled no leaks. Should have just done them both at same time. Did just order 1/4 line, 1/4 nut and fill tube grommet.