Part Location Diagram of WR02X10585 GE Recess Door Spring
See part 801 in the diagram
Replacing your General Electric Refrigerator Recess Door Spring
( Grid squares measure 1x1 inch )

Recess Door Spring WR02X10585

Works With Model 405062!

Rated by 10 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$9.16
In Stock
Fix Number:
FIX285013
Manufacturer #:
WR02X10585
Manufactured by:
GE
Works With Model 405062!

Product Description

This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the water dispenser assembly, behind the main control panel. If the dispenser lever is malfunctioning or the dispenser ice door is not closing, you may need to replace this door recess spring.

Videos For installing this part.

Replacing your Recess Door Spring

Replacing your Recess Door Spring

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Dispenser Door Solenoid Assembly
$45.89
In Stock
Dispenser Door Assembly or Flapper
$15.57
In Stock
Dispenser Door Recess Crank
$13.83
In Stock
Door Handle Actuator
$39.29
In Stock
Retainer Handle - Black
$39.83
Special Order
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 10 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Lorraine from Nashwauk, MN
Parts Used:
WR17X11653, WR02X10585
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Frsot build up and ice not coming out of shoot.
Couldn't get the trim board off, don't waste your time trying to do that. Remove the control panel by inserting screw driver in three holes. Lift up and out. Then you can follow the rest of the video explaining how to get your parts in.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Malcolm from St Petersburg, FL
Parts Used:
WR49X10233, WR62X10055, WR17X11653, WR17X10706, WR02X10585
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
flapper not working
Ordered parts, watched video. That easy. The best parts company I ever ordered from. Each part had a video to help you uninstall, repair and reinstall. coul;d'nt be any easier.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Klark from Orlando, FL
Parts Used:
WR62X10055, WR17X11653, WR17X10706, WR02X10585
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Freezer door flap would not close from the ice dispenser and the door would collect a block of solid ice.
Follow the installation videos they have on their website and it's very easy to replace all of these parts. Only issue I had was the top screw on the selenoid had rusted in place and instead of trying to get it out I simply wiggled the old part out, and wiggled the new one in its place. It worked great. My model has black shiny plastic i nserts for the freezer and refrigerator door and it is easier to take the top trim molding off the freezer door to slide out the decorative plastic which allows you to pop the frame around the icemaker out much easier. Careful not to break clips on the decorative trim.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from Newark, NY
Parts Used:
WR62X10055, WR02X10585
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
door on ice dispenser not closing tightly
Recommend watching the videos by this site which are excellent. Once front panel is removed and access is gained, the few screws removed to replace the door spring and the solenoid is straight forward and easy. Once back together, hearing the dispenser door 'snap' shut was very nice. Also, kudos to this site on how quickly that they shipped the order!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
george from miami, FL
Parts Used:
WR62X10055, WR17X11653, WR17X10706, WR02X10585
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
the ice door was not closing
I followed the videos that you guys had on the internet step by step which made the job of installation easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Rumford, RI
Parts Used:
WR62X10055, WR17X11653, WR17X10706, WR02X10585
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Ice maker Door would not Close
I watched the U Tube and followed the Instructions. We found a Lot of Mold around the Door, & Rust around the Door Solenoid. Be careful when removing the Outer plastic Frame and Push button panel..
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ron from Montgomery, AL
Parts Used:
WD13X10045, WR02X10585
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broken latch on dishwasher
Due to an injury to my hand, my wife attempted to repair the latch on our dishwasher by watching the video on this site. The only difficulty was in disconnecting the piece that held the control panel to the door. In the video, the guy's arm is in the way so she wasn't sure how to remove the clip that held it in place. The rest of the repa ir went very smoothly and she was very proud of herself for fixing the dishwasher. By the way, the parts arrived here in less than 24 hours.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
peter from bayville, NJ
Parts Used:
WR62X10055, WR17X11653, WR17X10706, WR02X10585
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
flapper was stuck open forming ice build up
I folllowed your excellent video had no problem also parts were order 2am friday I received them saturday at 1pm.(great service)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Tampa, FL
Parts Used:
WR62X10055, WR17X11653, WR17X10706, WR02X10585
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The in-door ice maker flapper door had stopped opening to allow ice to fall into the glass
Similar to online videos for other GE in-door models. Unplug. Pull the in-door water/ice control panel out from the bottom, it is a click fit. Unplug the 3 wire harness fittings from the back of the board and set it aside. remove the 4 screws at the corners of the paddle housing and remove. All of the flapper solenoid, door spring and cra nk are now exposed. Remove old solenoid by removing 2 bottom screws and loosening the top screw, then pull it out at the bottom and slide off of upper screw. Remove plunger hanging form door crank. Remove door crank and spring held in by screws. Assemble new flapper onto crank (click fit) and replace crank and spring into door. Hang new solenoid plunger onto crank arm, and reinstall solenoid with 3 screws. Reinstall paddle housing with 4 screws. Reinsert 3 wire harness connecters onto back of control board. Slide control board into recess at the top and click bottom into place.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Council Bluffs, IA
Parts Used:
WR17X11653, WR02X10585
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Frost buildup in icemaker opening
I tried to follow the video about removing the plate/cover around the dispenser area but to no avail. I broke two of the screws before I ended up removing the inside of the door. After removing the inside of the door the repair went as described in the video except it seemed to be much easier since it was all out in the open and you cou ld see everything clearly. Take care putting the dispenser back in the door, make sure you get the water tube in the right place or you will have to take it apart again to make it right. Easy repair.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX285013
Manufacturer Part Number: WR02X10585
Brand
Model Number
Description
General Electric
40201-0
Dishwasher
General Electric
402011
Dishwasher
General Electric
40205-0
Dishwasher
General Electric
402051
Dishwasher
General Electric
40206-0
Dishwasher
General Electric
402061
Dishwasher
General Electric
402070
Dishwasher
General Electric
403110
Dishwasher
General Electric
403111
Dishwasher
General Electric
405010
Dishwasher
General Electric
405011
Dishwasher
General Electric
405012
Dishwasher
General Electric
405050
Dishwasher
General Electric
405051
Dishwasher
General Electric
405052
Dishwasher
General Electric
405060
Dishwasher
General Electric
405061
Dishwasher
General Electric
405062
Dishwasher
General Electric
4070100
Dishwasher
General Electric
4070110
Dishwasher
General Electric
4070500
Dishwasher
General Electric
4070510
General Electric
4070600
Dishwasher
General Electric
4070610
Dishwasher
General Electric
4070800
Dishwasher
General Electric
4070810
General Electric
4071100
Dishwasher
General Electric
4071110
General Electric
4071120
Dishwasher
General Electric
4071500
Dishwasher