Part Location Diagram of WR02X10098 GE Evaporator/Condensor Fan Grommet
See part 615 in the diagram
( Grid squares measure 1x1 inch )

Evaporator/Condensor Fan Grommet WR02X10098

Works With Model HTS22GBPBRWW!

Rated by 3 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$11.58
In Stock
Fix Number:
FIX284555
Manufacturer #:
WR02X10098
Manufactured by:
GE
Works With Model HTS22GBPBRWW!

Product Description

This grommet is found on both the front and back of the fan motor assembly for the condenser and the evaporator in your fridge. It is used to provide a buffer between the fan motor and the mounting bracket, which helps to reduce noise. You may need to replace the grommets if you are getting excessive noise from either the condenser or evaporator fan motors, you may need to replace one or more grommets. This is an authentic OEM part, made of black plastic and measuring approximately 1 inch in diameter. They are sold individually, so if you need to replace more than one grommet be sure to order the correct quantity.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Evaporator Fan Grommet - Red
$13.20
In Stock
Condenser Fan Motor
$51.98
In Stock
Compression Ring
$9.87
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.4 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Scott from Nampa, ID
Parts Used:
WR60X10220, WR02X10098
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Fan was rubbing against fan shroud and running slow. Rubber gromets were worn and allowing fan motor to sag.
Unplugged the refrigerator. Pulled rear access plate off (removed 7 screws). Disconnected fan motor. Fan motor was running slow even if the fan propeller was clear of fan shroud. Removed two screws to remove the fan motor from mounting bracket. With fan motor loose, I removed the fan propeller from motor by pulling it off the shaft. I then slid the motor shaft out from the mounting bracket to remove fan motor. I then vacuumed out the condenser coil area to remove dust. I cleaned the fan propeller. Removed rubber grommets from motor mounting brackets and replaced them with new ones. Slid new fan motor shaft through mounting bracket and maneuvered motor so as to attach the fan propeller. Reattached fan propeller by pushing it back onto the motor shaft. Fitted motor into the mounting bracket and secured to coil housing with the two screws I removed earlier. Make certain that the grounding wire is secured under one of the mounting bracket screws. Plugged the refrigerator back in. Observed that the fan was rotating free and clear of fan shroud. Reattached the rear access plate.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Asheboro, NC
Parts Used:
WR60X10170, WR02X10098
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Refrigerator was making a squeaking / squealing noise at certain times
Researched possible cause on YouTube determining it could possibly be the condenser fan motor. Relatively easy to remove and replace after watching YouTube videos. Approximately 30 minute repair time
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alfred E. from Bloomfield, NJ
Parts Used:
WR02X10098
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Loud Noise
I watched the video that this site has online. First shut off the power by pulling off the electrical line. If I hadn't watched the video I would have replaced the fan too instead of just the two grommets. I also probably wouldn't have seen that there are 2 grommets, as one of them is kind of hidden in the back of the fan. Also, getting t he clip that secures the fan off and back on is not easy. Needle nose pliers are needed and even with those it is not as easy as the video repair man accomplished it. I found expanding the round clip a little made it possible to get it back on. I also put a little Vaseline on it so it slipped back on. Be careful not to damage the fragile styrofoam when you are removing the plastic shield at the start of the project. Go slow. If you damage it, duct tape may help to repair it. You can do this job. Also don't loose or drop the screws.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX284555
Manufacturer Part Number: WR02X10098
Brand
Model Number
Description
General Electric
31181-1
Refrigerator
General Electric
31191-1
Refrigerator
General Electric
3210-00L0S00-A
Refrigerator
General Electric
3210-00R0S00-A
Refrigerator
General Electric
36211XBMBRWW
Refrigerator
General Electric
36211XBMDRWW
Refrigerator
General Electric
36211XBMERWW
General Electric
36211XBMFRWW
General Electric
36211XBRERWW
General Electric
36211XBRFRWW
Kenmore
36348042891
Refrigerator
Kenmore
36348042892
Refrigerator
Kenmore
36348042893
Refrigerator
Kenmore
36348042894
Refrigerator
Kenmore
36348042896
Refrigerator
Kenmore
36348042897
Refrigerator
Kenmore
36348047891
Refrigerator
Kenmore
36348047892
Refrigerator
Kenmore
36348047893
Refrigerator
Kenmore
36348047894
Refrigerator
Kenmore
36348047896
Refrigerator
Kenmore
36348047897
Refrigerator
Kenmore
36348252891
Refrigerator
Kenmore
36348252892
Refrigerator
Kenmore
36348252893
Refrigerator
Kenmore
36348252894
Refrigerator
Kenmore
36348252896
Refrigerator
Kenmore
36348252897
Refrigerator
Kenmore
36348257891
Refrigerator
Kenmore
36348257892
Refrigerator