The dispenser door solenoid is the part that controls the flapper door on your ice maker, allowing it to open and close when dispensing ice. If your ice maker is not dispensing ice or water, the door is not opening or closing, or the door is sweating, there may be an issue with the dispenser door solenoid. You can test this part with a multimeter to determine if it is faulty. If the part has failed it will need to be replaced. This part is a genuine OEM replacement for your dispenser door solenoid assembly.
Works with the following brands:
General Electric, Hotpoint, Kenmore
Works with the following products:
Refrigerator
Fixes the following symptoms:
Ice maker won’t dispense ice, Not dispensing water, Door won’t open or close, Door Sweating
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jody
February 20, 2023
We are getting ice but nothing from water dispenser… Getting water to the front connector of water line but nothing beyond that. Should we look to replace Union connector first before micro switch? Thanks so much. Jody PS we don’t have a trim around the controls
For model number GZS22DSJCFSS
Hello Jody, thank you for reaching out. Based on our study, we suggest checking the refrigerator control setting. If it is too cold, adjust it to a warmer setting. Also, you need to check the water reservoir; if it is frozen, you need to melt the ice. If the problem still persists, we recommend replacing the micro switch, part number FIX8259956, and the interface dispenser assembly, part number FIX8758671. We hope this sorts out your problem!
I'm trying to replace ice dispenser solenoid but I can't remove trim
For model number GSHS5KGXDCSS
Hello David, Thank you for the question. We suggest watching the How to Video on the Site. We hope this helps!
https://www.youtube.com/watch?v=KDchQOAh3cE&t=58s
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This is a genuine OEM replacement door flap for the ice maker in your refrigerator. This part goes by many different names, including door recess assembly, ice door assembly, dispenser door, ice chute door kit, ice chute...
This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the wate...
The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty knife and a Phillips ...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Dispenser door for ice and ice maker was frosting shut.
The repair went very easy. Removing the front panel for ice and water dispenser required only a small screwdriver to push three little pegs up at the bottom and that gave me access to the screws needing to be removed. I turned the entire unit off and defrosted everything the day before I installed the part. This seems to have fixed the p
... Read moreroblem.
Ordered parts, watched video. That easy. The best parts company I ever ordered from. Each part had a video to help you uninstall, repair and reinstall. coul;d'nt be any easier.
Flap in ice shoot would not close completely, causing loss of temp in freezer.
Ordered new flap and spring, hoping that would do the trick, but also needed the solenoid. Both orders came ASAP fromThis site. The videos were helpful (although realized we didn't need to remove escutcheon nor fully disconnect panel). With my son aiming a flashlight for better illumination, we were able to repair in less than 20 minu
... Read moretes. Not quite as easy as the video -- probably because we were making the repair without the background music! Ice works, water works, freezer works -- thanks .
door on front feed ice feeder on door would not close tight causing frost and ice build up
Carefully pop off front cover where the selector buttons are (labeled water, crushed, cubes). Remove 4 screws from each corner giving you access to the solenoid assembly. Unplug the connector from the solenoid. Remove 2 bottom screws and loosen the top screw so the solenoid can slide out. Open the ice shoot door and slide the solenoid plu
... Read morenger off. Reverse the process and you are done.
Freezer door flap would not close from the ice dispenser and the door would collect a block of solid ice.
Follow the installation videos they have on their website and it's very easy to replace all of these parts. Only issue I had was the top screw on the selenoid had rusted in place and instead of trying to get it out I simply wiggled the old part out, and wiggled the new one in its place. It worked great. My model has black shiny plastic i
... Read morenserts for the freezer and refrigerator door and it is easier to take the top trim molding off the freezer door to slide out the decorative plastic which allows you to pop the frame around the icemaker out much easier. Careful not to break clips on the decorative trim.
Recommend watching the videos by this site which are excellent. Once front panel is removed and access is gained, the few screws removed to replace the door spring and the solenoid is straight forward and easy. Once back together, hearing the dispenser door 'snap' shut was very nice. Also, kudos to this site on how quickly that they
... Read moreshipped the order!
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1483583
Manufacturer Part Number: WR62X10055
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
