Part Location Diagram of WR62X10055 GE Dispenser Door Solenoid Assembly
See part 36 in the diagram
Replacing your General Electric Refrigerator Dispenser Door Solenoid Assembly
( Grid squares measure 1x1 inch )

Dispenser Door Solenoid Assembly

Rated by 27 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$64.74
In Stock
Fix Number:
FIX1483583
Manufacturer #:
WR62X10055
Manufactured by:
GE

Product Description

The dispenser door solenoid is the part that controls the flapper door on your ice maker, allowing it to open and close when dispensing ice. If your ice maker is not dispensing ice or water, the door is not opening or closing, or the door is sweating, there may be an issue with the dispenser door solenoid. You can test this part with a multimeter to determine if it is faulty. If the part has failed it will need to be replaced. This part is a genuine OEM replacement for your dispenser door solenoid assembly.

Videos For installing this part.

Replacing your Dispenser Door Solenoid Assembly

Replacing your Dispenser Door Solenoid Assembly

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jody
February 20, 2023
We are getting ice but nothing from water dispenser… Getting water to the front connector of water line but nothing beyond that. Should we look to replace Union connector first before micro switch? Thanks so much. Jody PS we don’t have a trim around the controls
For model number GZS22DSJCFSS
Fix.com logo
Hello Jody, thank you for reaching out. Based on our study, we suggest checking the refrigerator control setting. If it is too cold, adjust it to a warmer setting. Also, you need to check the water reservoir; if it is frozen, you need to melt the ice. If the problem still persists, we recommend replacing the micro switch, part number FIX8259956, and the interface dispenser assembly, part number FIX8758671. We hope this sorts out your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
David
October 7, 2021
I'm trying to replace ice dispenser solenoid but I can't remove trim
For model number GSHS5KGXDCSS
Fix.com logo
Hello David, Thank you for the question. We suggest watching the How to Video on the Site. We hope this helps! https://www.youtube.com/watch?v=KDchQOAh3cE&t=58s

Was this helpful?
Thank you for voting!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.1 / 5.0, 27 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
CHUCK from MYRTLE BEACH, SC
Parts Used:
WR23X10783, WR62X10055, WR02X11330
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Wouldn't dispense water
Did the repair the way the tutorials on website showed me to.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Teresa from OFallon, MO
Parts Used:
WR62X10055
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dispenser door for ice and ice maker was frosting shut.
The repair went very easy. Removing the front panel for ice and water dispenser required only a small screwdriver to push three little pegs up at the bottom and that gave me access to the screws needing to be removed. I turned the entire unit off and defrosted everything the day before I installed the part. This seems to have fixed the p roblem.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Malcolm from St Petersburg, FL
Parts Used:
WR49X10233, WR62X10055, WR17X11653, WR17X10706, WR02X10585
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
flapper not working
Ordered parts, watched video. That easy. The best parts company I ever ordered from. Each part had a video to help you uninstall, repair and reinstall. coul;d'nt be any easier.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frederick from Valley Springs, CA
Parts Used:
WR62X10055
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Water dispenser not working
Followed the video on replacement of solenoid with no problem.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from South Pasadena, CA
Parts Used:
WR62X10055
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Flap in ice shoot would not close completely, causing loss of temp in freezer.
Ordered new flap and spring, hoping that would do the trick, but also needed the solenoid. Both orders came ASAP fromThis site. The videos were helpful (although realized we didn't need to remove escutcheon nor fully disconnect panel). With my son aiming a flashlight for better illumination, we were able to repair in less than 20 minu tes. Not quite as easy as the video -- probably because we were making the repair without the background music! Ice works, water works, freezer works -- thanks .
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Calvin from Rockmart, GA
Parts Used:
WR62X10055
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
door on front feed ice feeder on door would not close tight causing frost and ice build up
Carefully pop off front cover where the selector buttons are (labeled water, crushed, cubes). Remove 4 screws from each corner giving you access to the solenoid assembly. Unplug the connector from the solenoid. Remove 2 bottom screws and loosen the top screw so the solenoid can slide out. Open the ice shoot door and slide the solenoid plu nger off. Reverse the process and you are done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Klark from Orlando, FL
Parts Used:
WR62X10055, WR17X11653, WR17X10706, WR02X10585
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Freezer door flap would not close from the ice dispenser and the door would collect a block of solid ice.
Follow the installation videos they have on their website and it's very easy to replace all of these parts. Only issue I had was the top screw on the selenoid had rusted in place and instead of trying to get it out I simply wiggled the old part out, and wiggled the new one in its place. It worked great. My model has black shiny plastic i nserts for the freezer and refrigerator door and it is easier to take the top trim molding off the freezer door to slide out the decorative plastic which allows you to pop the frame around the icemaker out much easier. Careful not to break clips on the decorative trim.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from The Villages, FL
Parts Used:
WR62X10055
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Foost
Solenoid not functioning properly:Replaced
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Don from Winchester, VA
Parts Used:
WR62X10055
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Ice flapper door not closing
Popped off panel, unplug wires, removed solenoid and plugged new one in.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from Newark, NY
Parts Used:
WR62X10055, WR02X10585
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
door on ice dispenser not closing tightly
Recommend watching the videos by this site which are excellent. Once front panel is removed and access is gained, the few screws removed to replace the door spring and the solenoid is straight forward and easy. Once back together, hearing the dispenser door 'snap' shut was very nice. Also, kudos to this site on how quickly that they shipped the order!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3

Model Compatibility

This part works with the following models:
Fix Number: FIX1483583
Manufacturer Part Number: WR62X10055
Brand
Model Number
Description
General Electric
39631UGTAWW
Refrigerator
General Electric
39631UGXAWW
Refrigerator
General Electric
39639USTAGV
Refrigerator
General Electric
39639USXAGV
Refrigerator
General Electric
A4425GDTABB
Refrigerator
General Electric
A4425GDTAWW
Refrigerator
General Electric
A4425GDTBBB
Refrigerator
General Electric
A4425GDTBWW
Refrigerator
General Electric
A4425GDTW
Refrigerator - GE Refrigerator Model A4425GDTW Parts
General Electric
BSS25GFPACC
Refrigerator
General Electric
BSS25GFPAWW
Refrigerator
General Electric
BSS25GFPCCC
Refrigerator
General Electric
BSS25GFPCWW
Refrigerator
General Electric
BSS25GFPDCC
Refrigerator
General Electric
BSS25GFPDWW
Refrigerator
General Electric
BSS25GFPECC
Refrigerator
General Electric
BSS25GFPEWW
Refrigerator
General Electric
BSS25GFPHCC
Refrigerator
General Electric
BSS25GFPHWW
Refrigerator
General Electric
BSS25JFRFWW
Refrigerator
General Electric
BSS25JFRJWW
Refrigerator
General Electric
BSS25JFTAWW
Refrigerator
General Electric
BSS25JFTBWW
Refrigerator - T Series
General Electric
BSS25JFTCWW
Refrigerator - T Series
General Electric
BSS25JFTDWW
Refrigerator
General Electric
BSS25JFTEWW
Refrigerator - T Series
General Electric
BSS25JFTGWW
Refrigerator
General Electric
BSS25JFTHWW
Refrigerator
General Electric
BSS25JFTIWW
Refrigerator
General Electric
BSS25JFTJWW
Refrigerator