This genuine OEM light switch is used to control the light in your refrigerator. When the fridge door is closed, it depresses the switch and turns the light off. When the fridge door opens, it releases the switch, and the light turns on. If the light is staying on when the door is closed, or the light is not on at all, there may be an issue with the switch. The part can be tested with a multimeter to determine if it is defective. Please be sure to disconnect the power supply to your fridge before beginning this repair.
Works with the following brands:
General Electric, Hotpoint, Kenmore
Works with the following products:
Refrigerator
Fixes the following symptoms:
Light not working, Fridge too warm
Part# WR23X23343 replaces these:
AP5957928, WR23X10175, WR23X10530
Works with the following brands:
General Electric, Hotpoint, Kenmore
Works with the following products
Refrigerator
Fixes the following symptoms
Light not working, Fridge too warm
Part Number Cross Reference
Part# WR23X23343 replaces these:
AP5957928, WR23X10175, WR23X10530
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
September 24, 2021
I am looking for a light switch. The switch in the diagram has 2 prongs and the one in my door has 3 prongs (wires). Can you give me the part number for the 3 prong switch
For model number GZS22DGJJFBB
Hello Paul, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX10066583. The 3 Wire Switch is no longer made and the 2 Wire can be used. You need to connect the Wires Labeled C and NC to the labeled terminals on the switch and the Extra wire can be capped off as it is no longer needed. We hope this helps!
Was this helpful?
Thank you for voting!
Paul
September 24, 2021
I need a light switch that accepts 3 wires
For model number GZS22DGJNFBB
Hello Paul, thank you for writing. We have researched the model you have provided and have found the part you are looking for is (3) Wire Light Switch PartSelect Number PS12511478.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Unplugged refrigerator used screwdriver to get old plug out unplugged from part plugged new one in snapped back in place plug refrigerator back in well la done I'm a female 63 yrs old if I can do it you can oh by the way it only took 3 days for part to come
Lights stayed on all the time causing the box to heat on the inside.
The lever on the old switch broke off. I popped out the old one with a small screw driver, pulled the cables off with needle nose and reversed the process.
Item fell onto and snapped off the slight switch from the switch housing. Needed to replace the elite switch.
First I watched a short repair video on this site which described how to replace the switch. Super easy BUT it would have taken me a lot longer had I not know the 'secret' to get4ting the switch out easily. Replacing with the new was a snap.
Light switch was broken. Refrigerator side not cooling.
Removed the light switch with some pliers and a screwdriver, disconnected the wires. After that I connected the wires to the new switch and put it back into the slot and presto it worked
Light would not work after dropping milk carton on it.
Unplugged refrigerator. Used small screwdriver to pop out switch. Used small needle nose pliers to remove wires one at a time switching them to the new switch. Popped switch back into hole. Plugged back in refrigerator. Light worked. Whole operation was less than 10 minutes.
I purchased 5 sensors and the door switch. a $50.00 investment. Four sensors were located under small plastic grills The grills just popped off. I soldered all the new sensor connections and used shrink wrap. I have no worries about moisture, corrosion. or shorts. The door switch installed in 2 minutes. The problem was intermitt
... Read moreent So far I have not had any more refrigerator cooling problems. A good investment considering replacement cost of $1800..
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
2
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joyce B - May 22, 2021
Verified Purchase
Refrigerator switch
This was the exact part that I needed. With the help of YouTube, I was able to make this repair myself. It was quick and easy.
★★★★★
★★★★★
Bryan B - May 16, 2021
Verified Purchase
Frig light switch
Easy to install worked great
Model Compatibility
This part works with the following models:
Fix Number: FIX10066583
Manufacturer Part Number: WR23X23343
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
