Light Socket

So I looked online and tired to figure out what it could be. And all I could find was people saying to change out the socket or light switch. So I did. And still nothing. Turns out when I screwed in the latest bulb I over screwed and the connector at the end where the bulb touches was pushed down and I just needed to bend it up with a flat heads boom. Parts where unnecessary but cheap enough I kept for future endeavors. Try this first before spending the money. Only way I found out was searching for problems even after new parts and stumbled upon a thread where someone else suggested this. Passing the knowledge. *even the new part I received needed to be bent up.

1. Tools required screw driver and light socketkit. 2. Turn off electrical power. 3. Take screwdriver and pop out socket. 4. Replace light socket by snapping socket in place. 5. Screw in light bulb. 6. Turn on electrical power, and open door if light comes on, job completed.

I put the thang in thang, loosened it. Then, I put the thang in the thang. Walla!

Removed the old Assy and easily replaced with the new Assy. A snap!