Part Location Diagram of 5303918549 Frigidaire Evaporator Fan Motor Kit - 120V 60Hz
See part 13 in the diagram
Replacing your Frigidaire Refrigerator Evaporator Fan Motor Kit - 120V 60Hz
( Grid squares measure 1x1 inch )

Evaporator Fan Motor Kit - 120V 60Hz

Works With Model GRT15C2AW0!

Rated by 6 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$76.40
In Stock
Fix Number: FIX3419839
Manufacturer #: 5303918549
Manufactured by: Frigidaire
Works With Model GRT15C2AW0!

Product Description

This kit includes the motor, clips and terminal connectors. This part has been updated by the manufacture. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

Videos For installing this part.

Replacing your Evaporator Fan Motor Kit - 120V 60Hz

Replacing your Evaporator Fan Motor Kit - 120V 60Hz

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 6 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Thomas from Viper, KY
  • Parts Used:
    5303918549
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
Ive had my Frigidaire double door for 8 yrs. Fridge portion was not cooling and stayed at room temperature although the freezer was just fine.
You could hear the evaporator fan kick on and off about 2-5 seconds at a time with little to no air output. Repair wasn't very difficult, remove all the racks, ( Little suggestion, u must remove the plastic black clip on the left rear portion of the top rack in order for it to come out.) drawers and railings as well. Remove the bolts holding the metal plating in the back of freezer. Mine has the ice maker so I had to tie up the top section to keep it in place to remove the fan. The wiring harness was different than the factory so I had to cut and splice the wires to install the new one. You'll also need to keep the little clip and rubber bushing from your old one to make the fan stay in the correct position. Put everything back as you did taking it off...
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Robert from Cleveland, MS
  • Parts Used:
    5303918549
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Freezer was not freezing at the top on a side by side refrigerator. refrigerator not cooling properly.
I removed the middle shelf in the freezer. Then I removed the lower, back panel by unscrewing 4 screws. This gave me access to the evaporator motor that simply sits on a ledge behind the panel. There were 3 wires connected by male and female slide connects (or clips). I disconnected these. One was simply a frame ground wire. I hooked the two wires up to 120 volts and the motor didn't work. The fan motor kit had two ground frame wires and two main wires that branched into more with harness. I cut out one ground frame wire and cut the harness out to just two basic wires coming from the motor. I stripped the end of these wires and installed male slide connects with electrical pliers. Before putting the fan back, I plugged in unit and the motor ran fine. I put the fan on the ledge, put the back cover on with 4 screws, and put the shelf back in the unit. I plugged in unit and put ice trays of water high and low in freezer. Unit works fine. The fan motor costs $35.00, shipping $6.15. Total $41.15. The clips cost $1.77 at Walmart. I feel good about the repair and now I am working on my dishwasher.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Bryan from Leon, KS
  • Parts Used:
    5303918549
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
The freezer and refrigerator were cold at the bottom but warm at the top. The evaporater fan broke so it would not push the cold air down below up higher.
The connectors were wrong because the manufacturer updated the wiring harness for multiple units . I just had to splice the the old harness connector into the new fan being very careful to follow each wire of what it's purpose was ie....ground to ground, solenoid wire to solenoid wire , fan hot wire to fan hot wire.......and so on . I would say on a difficulty level of 1-5 this is a lite 4. But if your a true do-it-yourselfer you will have a good time enjoying what your doing and your accomplishment whenits completed.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Charles from Vermillion, OH
  • Parts Used:
    5303918549
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
fan did not work. freezer fine, but lower refrig barely cool
Went to the tutorial and was trying to share with friend, and before I could tell him, he took out the two screws and attached the fan and had it back together before I could finish the instructions. Works fine
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Tamara from Aurora, IN
  • Parts Used:
    5303918549
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
Refrigerator wouldn't stay cool
Replaced fan motor in freezer. Ordered the part and received it in 2 days.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Mark from Belmont, MA
  • Parts Used:
    5303918549
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
refrigerator warm ,but compresser always running
Followed the video it was right on!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX3419839
Manufacturer Part Number: 5303918549
Brand
Model Number
Description
Kenmore
25331113300
Refrigerator
Kenmore
25331113302
Refrigerator
Kenmore
25331113304
Refrigerator
Kenmore
25331113308
Refrigerator
Kenmore
2533111330A
Refrigerator
Kenmore
2533111330B
Refrigerator
Kenmore
2533111330C
Refrigerator
Kenmore
2533111330D
Refrigerator
Kenmore
2533111330E
Refrigerator
Kenmore
2533111330F
Refrigerator
Kenmore
2533111330G
Refrigerator
Kenmore
25331115300
Refrigerator
Kenmore
25331115302
Refrigerator
Kenmore
25331115304
Refrigerator
Kenmore
25331115308
Refrigerator
Kenmore
2533111530A
Refrigerator
Kenmore
2533111530B
Refrigerator
Kenmore
2533111530C
Refrigerator
Kenmore
2533111530D
Refrigerator
Kenmore
2533111530E
Refrigerator
Kenmore
2533111530F
Refrigerator
Kenmore
2533111530G
Refrigerator
Kenmore
25331123300
Refrigerator
Kenmore
25331123302
Refrigerator
Kenmore
25331125300
Refrigerator
Kenmore
25331125302
Refrigerator
Kenmore
25331133300
Refrigerator
Kenmore
25331133302
Refrigerator
Kenmore
25331133303
Refrigerator
Kenmore
25331133306
Refrigerator