Evaporator Fan Motor Kit - 120V 60Hz
$74.54
In Stock
Fix Number: FIX3419839
Manufacturer #: 5303918549
Manufactured by:
Frigidaire
-
Product Description
This kit includes the motor, clips and terminal connectors. This part has been updated by the manufacture. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
-
Works with the following brandsFrigidaire, Kenmore, Westinghouse, Gibson
-
Works with the following productsRefrigerator
-
Fixes the following symptomsFridge too warm, Noisy, Freezer section too warm, Fridge and Freezer are too warm
-
Part Number Cross ReferencePart# 5303918549 replaces these:AP4700070, 1637660, 5303918549, 240315801, 240315802, 240315803, 240369701, 240369702, 241537301, 5304445861
Product Description
This kit includes the motor, clips and terminal connectors. This part has been updated by the manufacture. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
-
Works with the following brands:Frigidaire, Kenmore, Westinghouse, Gibson
-
Works with the following products:Refrigerator
-
Fixes the following symptoms:Fridge too warm, Noisy, Freezer section too warm, Fridge and Freezer are too warm
-
Part# 5303918549 replaces these:AP4700070, 1637660, 5303918549, 240315801, 240315802, 240315803 ... Show more , 240369701, 240369702, 241537301, 5304445861 Show less
Videos For installing this part.
Replacing your Evaporator Fan Motor Kit - 120V 60Hz
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Thomas from Viper, KY
-
Parts Used:5303918549
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
Ive had my Frigidaire double door for 8 yrs. Fridge portion was not cooling and stayed at room temperature although the freezer was just fine.
You could hear the evaporator fan kick on and off about 2-5 seconds at a time with little to no air output. Repair wasn't very difficult, remove all the racks, ( Little suggestion, u must remove the plastic black clip on the left rear portion of the top rack in order for it to come out.) drawers and railings as well. Remove the bolts holding the metal plating in the back of freezer. Mine has the ice maker so I had to tie up the top section to keep it in place to remove the fan. The wiring harness was different than the factory so I had to cut and splice the wires to install the new one. You'll also need to keep the little clip and rubber bushing from your old one to make the fan stay in the correct position. Put everything back as you did taking it off...
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Robert from Cleveland, MS
-
Parts Used:5303918549
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Freezer was not freezing at the top on a side by side refrigerator. refrigerator not cooling properly.
I removed the middle shelf in the freezer. Then I removed the lower, back panel by unscrewing 4 screws. This gave me access to the evaporator motor that simply sits on a ledge behind the panel. There were 3 wires connected by male and female slide connects (or clips). I disconnected these. One was simply a frame ground wire. I hooked the two wires up to 120 volts and the motor didn't work. The fan motor kit had two ground frame wires and two main wires that branched into more with harness. I cut out one ground frame wire and cut the harness out to just two basic wires coming from the motor. I stripped the end of these wires and installed male slide connects with electrical pliers. Before putting the fan back, I plugged in unit and the motor ran fine. I put the fan on the ledge, put the back cover on with 4 screws, and put the shelf back in the unit. I plugged in unit and put ice trays of water high and low in freezer. Unit works fine. The fan motor costs $35.00, shipping $6.15. Total $41.15. The clips cost $1.77 at Walmart. I feel good about the repair and now I am working on my dishwasher.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Bryan from Leon, KS
-
Parts Used:5303918549
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
The freezer and refrigerator were cold at the bottom but warm at the top. The evaporater fan broke so it would not push the cold air down below up higher.
The connectors were wrong because the manufacturer updated the wiring harness for multiple units . I just had to splice the the old harness connector into the new fan being very careful to follow each wire of what it's purpose was ie....ground to ground, solenoid wire to solenoid wire , fan hot wire to fan hot wire.......and so on . I would say on a difficulty level of 1-5 this is a lite 4. But if your a true do-it-yourselfer you will have a good time enjoying what your doing and your accomplishment whenits completed.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Charles from Vermillion, OH
-
Parts Used:5303918549
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
fan did not work. freezer fine, but lower refrig barely cool
Went to the tutorial and was trying to share with friend, and before I could tell him, he took out the two screws and attached the fan and had it back together before I could finish the instructions. Works fine
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Tamara from Aurora, IN
-
Parts Used:5303918549
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
Refrigerator wouldn't stay cool
Replaced fan motor in freezer. Ordered the part and received it in 2 days.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Mark from Belmont, MA
-
Parts Used:5303918549
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
refrigerator warm ,but compresser always running
Followed the video it was right on!
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3419839
Manufacturer Part Number: 5303918549
Manufacturer Part Number: 5303918549
Brand
Model Number
Description