Part Location Diagram of 241993101 Frigidaire Crisper Cover Support - Front
See part 100 in the diagram
Replacing your Frigidaire Refrigerator Crisper Cover Support - Front
( Grid squares measure 1x1 inch )

Crisper Cover Support - Front 241993101

Works With Model WWSS2601KW6!

Rated by 17 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$11.87
In Stock
Fix Number:
FIX2358880
Manufacturer #:
241993101
Manufactured by:
Frigidaire
Works With Model WWSS2601KW6!

Product Description

If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet wall. Sold individually, this part is white in color, measures approximately 1 inch in diameter, and can be used for the front and rear support. The installation of this part is considered easy and should only take a few minutes. You will need a small flat blade screwdriver, putty knife, and soft hammer. Take the crisper and shelf out of the refrigerator first. To remove the old part, start by pushing the locking pin into the interior of the cabinet using the screwdriver, pull the support out with the putty knife. If taking out the pin is difficult, use a flat blade screwdriver to push it down and out of sight, this will not harm your refrigerator. Remove the pin and attach the new support, using a soft hammer to lock the new pin in place.

Videos For installing this part.

Replacing your Crisper Cover Support - Front

Replacing your Crisper Cover Support - Front

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Crisper Support - Rear
$13.19
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.2 / 5.0, 17 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Michelle from Cypress, TX
Parts Used:
241993101
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Crisper cover support broke
I watched the video you had on your website---really easy-you guys ROCK!
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Humberto from Laredo, TX
Parts Used:
5304517886, 242044113, 241993101, 241993001, EAFCBF, 241510201, 5308000110, 5303918214
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Ice build up in the evaporator.
Im from Mexico, I had to buy all the parts in US, I made an overhaul to my refrigerator, also I replace the main control board wich has the defrost timer integrated in this mother board, tooks me more de 2 session of 2 hours each one to complete the whole reparation. The most difficult part was remove and install the defrost heater elemen t, because you most handle with the evaporator, need patience and time, also was difficult for me to replace the main control box because the access to it in the bottom of the fridge, too norrow the space and too short the harness cables that connect to it. gasket, defrost control, crisper support and bulb, very easy. excellent service from this site. After almost 3 weeks the service guy I called at the begining is still looking for the parts, Im glad I did my self.
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffery from Santa ana, CA
Parts Used:
241993101, 241993001, 240323001
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Broken shelf brackets
watched a video on you tube then did the repair
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Bozeman, MT
Parts Used:
241993101
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The cover supports were broken on the bottom crisper drawer.
1. Removed all food items from crisper drawer 2. Carefully removed the drawer and glass. 3. Used a paint scraper to get under the old support; lightly tapped the end with a hammer to pop out the broken support. 4. Removed the white pin or pushed it in with a screwdriver if too far in. 5 Positioned the new support pin as guided with 3 ho les. 6. Used the soft hammer to pound the upper pin into the side of the fridge. 7. Cleaned all surfaces with vinegar/water. 8. Continued to replace all four supports. 9. Gently replaced the glass/drawer (after a thorough cleaning!). 10. Smiled!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathleen W from Saint Louis, MO
Parts Used:
241993101
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Broken support on right side of hydrator.
Watched the video which was very helpful. The part arrived the day after ordering. GREAT service. What took the most time was fishing out the part from inside the refrigerator wall. Pliers were too big, tweezers did the job.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Neil from Lakeview, MI
Parts Used:
241993101
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
support for crisper/glass/drawer broke off
Took crisper drawer out.Then pulled glass/drawer slides straight up and removed.Pried remainder of support with screwdriver(thin blade) out from the side wall of refridgerator.In my case,the center "moly type"fastener also snapped off,but,I was able to retrieve it by pulling the pieces out with needle nose pliers.Pushed new support in,sna pped in glass/drawer slides in,and pushed in drawer.Voila! Have noticed the same thing happening in the freezer,but, have lucked out so far.Poor design as a lot of weight usually is upon the flat surfaces on all shelves.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phillip from Easton, MD
Parts Used:
241993101
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Crisper cover front support failed
(1) Used a putty knife to pry the failed part away from cabinet wall. (2) used wire cutter pliers to nip off extra nub from the part ordered so that it matched the front support on the other side. (3) Pressed modified support into the cabinet guide holes witih the putty knife handle.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
cort from piketon, OH
Parts Used:
241993101, WFCB, 240373108, 240357806, 240357706, 240356401, 240323001
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
crisper cover support
real good, I watched the viedo, and was done in a good matter of time. thanks for the help
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
antonio from Arlington, TX
Parts Used:
241993101, 241993001
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
broken crisper support and crisper glass support
just like the vidio showed me
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andy from Columbia, SC
Parts Used:
241993101
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
front crisper cover supports broke and would not support the cover
Put duct tape around the broken supports to protect the side of the fridge. Used the hammer and the pin punch to drive the locking pin of the support into the side of the fridge. Took the putty knife and pried the broken support out. Used the pin punch to move the old locking pin out of the way. Put the new support into the holes. Used the hammer to drive the new locking pin into fridge. Drove it flush with the new support. Works great.
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2

Model Compatibility

This part works with the following models:
Fix Number: FIX2358880
Manufacturer Part Number: 241993101
Brand
Model Number
Description
Kenmore
25344302400
Refrigerator
Kenmore
25344302401
Refrigerator
Kenmore
25344303400
Refrigerator
Kenmore
25344303401
Refrigerator
Kenmore
25344303402
Refrigerator
Kenmore
25344303403
Refrigerator
Kenmore
25344304400
Refrigerator
Kenmore
25344304401
Refrigerator
Kenmore
25344309400
Refrigerator
Kenmore
25344309401
Refrigerator
Kenmore
25344333600
Refrigerator
Kenmore
25344333601
Refrigerator
Kenmore
25344333602
Refrigerator
Kenmore
25344333603
Refrigerator
Kenmore
25344333604
Refrigerator
Kenmore
25344333605
Refrigerator
Kenmore
25344333606
Refrigerator
Kenmore
25344333607
Refrigerator
Kenmore
25344333608
Refrigerator
Kenmore
25344333609
Refrigerator
Kenmore
2534433360A
Refrigerator
Kenmore
25344352400
Refrigerator
Kenmore
25344352401
Refrigerator
Kenmore
25344352403
Refrigerator
Kenmore
25344352404
Refrigerator
Kenmore
25344352405
Refrigerator
Kenmore
25344352406
Refrigerator
Kenmore
25344352407
Refrigerator
Kenmore
25344352408
Refrigerator
Kenmore
25344352409
Refrigerator