Part Location Diagram of D7824706Q Whirlpool Replacement Ice Maker
See part 1 in the diagram
Replacing your Amana Refrigerator Replacement Ice Maker
( Grid squares measure 1x1 inch )

Replacement Ice Maker D7824706Q

Works With Model UKI2500AXX!
★★★★★
★★★★★
2 Reviews

Rated by 52 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$139.02
In Stock
Fix Number:
FIX2121513
Manufacturer #:
D7824706Q
Manufactured by:
Whirlpool
Works With Model UKI2500AXX!

Product Description

If your freezer has stopped making ice cubes, it may be time to replace your ice maker. Normal wear and tear, or accidental damage may be the cause of this. This model includes the control device and ice mold, which are made of plastic and metal, and measure approximately 11 inches long by 5 inches wide. Please note that this kit does not include the cover, ice level arm, or the wire harness. These parts can be ordered separately, or you can use the existing parts from the original ice maker. This Replacement Ice Maker is a genuine OEM part and is also known as an Ice Maker Assembly or a Refrigerator Ice Maker. Installation will require a quarter inch nut driver, and make sure that you disconnect your power and water supply before beginning this repair. Once the new part is in place, your fridge will begin making ice again within a few hours.

Videos For installing this part.

Replacing your Replacement Ice Maker

Replacing your Replacement Ice Maker

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
February 13, 2022
Why would the ice maker quit crushing the ice whole ice comes out
For model number Gss20ieaww
Fix.com logo
Hello Mike, Thank you for your inquiry. It could be an issue with the auger or the crusher blades. We would recommend checking to make sure that the auger can rotate freely and that there is no ice or debris jamming the crusher blades. The other part we recommend checking is the ice dispenser solenoid. You can test this part with a multimeter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.1 / 5.0, 52 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Edward from Casa Grande, AZ
Parts Used:
D7824706Q
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Unit quit working. Wouldn't cycle any more. Made sounds like gears were maybe stripped..
Followed installation video on this web site. Works like a new one !
22 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Salt Point, NY
Parts Used:
D7824706Q
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
No ice
replaced ice maker . Very easy to install
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tracy from Aurora, CO
Parts Used:
EDR4RXD1, D7824706Q
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
the ice maker died. I determined that the water line was not the problem
followed The YouTube instructions. and it is working fabulously! Thank You
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
wayne from sun lakes, AZ
Parts Used:
WPM0114003, WPB5705307, WP2300868, D7824706Q
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Ice maker leaking
Bought a new one and put it in. Very easy...all done and it works great
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elton from Slidell, LA
Parts Used:
D7824706Q
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Leaking ice maker - clumps of ice in dispenser
Disconnected power and water supply. Removed ice bin and left rail and bottom ice maker mounting screw. Loosened 2 top mounting screws on top of ice maker. Removed ice maker and disconnected cable. Transferred all hardware and cable to new ice maker and installed in opposite sequence.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charles from Belton, MO
Parts Used:
D7824706Q
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
OLD ICE MAKER LEAKING
OLD ONE OUT PUT THE NEW ONE IN EASY FIX WORKS LIKE NEW ONE
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jason from Hartfield, VA
Parts Used:
D7824706Q, WP90767
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Ice maker was leaking which resulted in a large block of ice instead of cubes
I removed the screws holding the ice maker to the side of the refrigerator. There were positions for three screws-- two on top and one on the bottom; mine was missing the bottom screw. I pulled the wiring harness free from the back of the fridge and removed the old icemaker. Once the old icemaker was removed from the fridge, I removed the wiring harness from it using a screwdriver to push in the tab holding it in place. I removed the steel ice catch bar that stops ice from being made when it is in the up position-- no tools needed for that. It was just held in by tension. I installed the old ice catch bar and the old wiring harness onto the new ice maker. Then I attached the wiring harness to the back of the fridge, lined the water tube in place with the icemaker and replaced the screws to hold the new icemaker to the fridge. Ice maker now works perfectly.
1 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
GARY from COLUMBIA, MO
Parts Used:
D7824706Q
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
ICE MAKER WAS LEAKING INTO ICE BIN
Removed the ice maker.3 screws and a plug.Ordered a new one from this site .It was really easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from Philadelphia, PA
Parts Used:
D7824706Q
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Ice Maker leaking
Followed the instructions I found on the web page when I ordered the part. Could not have made it easier unless they came over and did it for me.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jack from Dinuba, CA
Parts Used:
D7824706Q
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Ice Maker Quit Making Ice
Replaced Ice Maker as per instructions on this web site, There are also videos on YouTube that make this repair very easy. After repair took old unit apart and found timing gears were stripped because they are plastic.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX2121513
Manufacturer Part Number: D7824706Q
Brand
Model Number
Description
Kenmore
10672002010
Refrigerator
Kenmore
10672003010
Refrigerator - REFRIGERATOR
Kenmore
10672003011
Refrigerator - REFRIGERATOR
Kenmore
10672009010
Refrigerator - REFRIGERATOR
Kenmore
10672012010
Refrigerator
Kenmore
10672013010
Refrigerator
Kenmore
10672019010
Refrigerator
Maytag
12001294
Ice Maker
Maytag
12001302
Ice Maker
Admiral
12500048
Ice Maker - Freestanding
Maytag
17694
Refrigerator - REFRIGERATOR
Admiral
17794A
Refrigerator - REFRIGERATOR
Admiral
18103-0
Refrigerator - REFRIGERATOR
Admiral
18103-0A
Refrigerator - REFRIGERATOR
Admiral
181040
Refrigerator - REFRIGERATOR
Amana
18914A
Refrigerator - AMANA REFRIGERATOR
Admiral
19123-0
Refrigerator - REFRIGERATOR
Admiral
19124-0
Refrigerator - REFRIGERATOR
Admiral
19133-0A
Refrigerator - REFRIGERATOR
Admiral
191340
Refrigerator - REFRIGERATOR
Admiral
191347
Refrigerator - REFRIGERATOR
Admiral
19143-0A
Refrigerator - REFRIGERATOR
Admiral
19143-0B
Refrigerator - REFRIGERATOR
Admiral
191450
Refrigerator - REFRIGERATOR
Admiral
191457
Refrigerator - REFRIGERATOR
Admiral
19153-1
Refrigerator - REFRIGERATOR
Admiral
191550
Refrigerator - REFRIGERATOR
Admiral
191557
Refrigerator - REFRIGERATOR
Admiral
19163-0A
Refrigerator - REFRIGERATOR
Admiral
191650
Refrigerator - REFRIGERATOR