Part Location Diagram of WPW10308477 Whirlpool Oven Bake Element
See part 7 in the diagram
Replacing your Whirlpool Range Oven Bake Element
( Grid squares measure 1x1 inch )

Oven Bake Element WPW10308477

Works With Model 4RF315PXGQ0!
★★★★★
★★★★★
2 Reviews

Rated by 6 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$42.89
In Stock
Fix Number:
FIX11752501
Manufacturer #:
WPW10308477
Manufactured by:
Whirlpool
Works With Model 4RF315PXGQ0!

Product Description

The bake element is found the bottom of the oven, and is what provides the heat for cooking and baking. If your oven is not coming up to temperature, is not sustaining a consistent temperature, or is not heating up at all, there may be an issue with your bake element. This genuine OEM part is a replacement element designed to fit your model. Before beginning this repair, please be sure to disconnect the power supply to your oven. You will need a Phillips screwdriver and a pair of needle nose pliers to complete this repair.

Videos For installing this part.

Replacing your Oven Bake Element

Replacing your Oven Bake Element

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 6 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
john from midland, NC
Parts Used:
WPW10308477, WPW10181986
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
THE OVEN WAS 10 DEGREES OFF,NOT REACHING PROPER TEMPRETURE.
THE PROBLEM I HAD COULD HAVE BEEN TWO THINGS.SO AT THE PRICE OF THE TWO THINGS WAS A GREAT PRICE.SO I INSTALLED THE TWO PARTS. PULL THE STOVE AWAY FROM THE WALL.MAKE SURE TO UNPLUG THE CORD FROM THE WALL OUTLET.ONLY TOOL YOU NEED IS A PHILLIPS SCREW DRIVER.UNCREW THE TWO SCREW.MAKE SURE TO HOLD THE WIRE LEADS BECAUSE THEY CAN FALL INTO T HE INSTULATION.PULL THE TWO LEADS OFF AND THEN REPLACE THE NEW LEADS OF THE NEW ELEMENT.PUT THE TWO SCREWS BACK IN AND THATS IT FOR THE ELEMENT.WITH THE SENSOR IS EASY.THE BACK OF THE STOVE HAS ABOUT 10 SCREWS ON THE BACK OF THE STOVE.UNSCREW ALL THE SCREWS,REMOVE THE BACK COVER AND UNSCREW THE TWO SCREW,THEN UNPLUG THE SENSOR CONNECTING LEAD.REPLACE THE NEW SENSOR,AN THEN REPLACE THE SCREWS,REPLACE THE BACK COVER,REPLACE THE SCREWS.PLUG THE STOVE INTO THE WALL SOCKET.TURN THE STOVE ON,THEN SET THE TEMPRETURE AND YOU REPAIRED YOUR STOVE WITH THE PROPER OVEN TEMPRETURE. THANK YOU.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from Hastings, FL
Parts Used:
WPW10308477
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Oven bake element burned out.
We watched the video on this site and a few other installation videos and followed the directions. The only thing we ran into that slowed us down was that the wires that clip on the back of the element were on there snugly, and they didn't unplug as easily as a plug in an outlet, but once my husband put on his gloves and really got a good grip on them he was able to unplug them. The new element did smoke a little when we first turned it on, but we were told that is normal. It works well. Thank you.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joedy from Union City, OH
Parts Used:
WPW10308477
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Burnt out oven element
Pulled the stove out unplugged the stove removed the racks from inside the oven used screwdriver removed two screws that held the element in place unplugged two wire leads on the element got the new element just reversed the procedure done in about twenty minutes
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lawrence from Newport, WA
Parts Used:
WPW10308477
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Bake element stopped working
Turn off power to stove by shutting off the breaker. Check to make sure power is off. Next spray the 2 screws holding the element to the oven with WD 40 or any liquid wrench type spray to loosen the screws overnight. Remove the screws, gently pull the element until you see 2 wires clipped to the element. Unclip them and install the new el ement to these 2 wires. Replace the 2 screws and you are finished. Restore power and check to see that the element heats up.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Claude from Richwood, WV
Parts Used:
WPW10308477
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Bake element nneded replaced, wear & tear
Unplugged the stove, pulled out baking racks, removed 2 element screws, pulled off 2 wires, removed old element. Installed new element in reverse procedure, plugged in stove, turned on to ensure element was working. Took about 5-10 minutes. Element works very well. Was pleased with order process, ordered part on Thursday, had it by Tuesda y as FedEx promised.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Selma, NC
Parts Used:
WPW10308477
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burned out over element
First and foremost unplug the unit from outlet. ( seems obvious, but just to be clear.) Then removed the hex screws from the rear panel, where the power supply run into it, removed cover, pulled off connector to element, Go inside the oven cavity and removed the two Phillips screws from the back wall, remove element installation is the sa me in reverse.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11752501
Manufacturer Part Number: WPW10308477
Brand
Model Number
Description
Amana
4KAER5500AW0
Range - 30" ELECTRIC FREESTANDING RANGE
Maytag
4KMER7600AW0
Range - 30" ELECTRIC FREESTANDING RANGE
Whirlpool
4KMER7600AW1
Whirlpool
4KWFC120MAW0
Range
Whirlpool
4KWFC120MAW1
Whirlpool
4RF302BXEQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ1
Range - Freestanding, Electric
Whirlpool
4RF315PXEQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXGQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXKQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXMQ0
Range - Freestanding, Electric
Kenmore
66495272502
Range
Kenmore
66495273502
Range
Kenmore
66495274502
Range
Kenmore
66495279502
Range
Kenmore
66565025101
Range
Kenmore
66592002100
Range
Kenmore
66592002101
Range
Kenmore
66592002102
Range
Kenmore
66592004100
Range
Kenmore
66592004101
Range
Kenmore
66592004102
Range
Kenmore
66592005101
Range
Kenmore
66592005102
Range
Kenmore
66592012100
Range
Kenmore
66592012101
Range
Kenmore
66592012102
Range