Part Location Diagram of WPW10181986 Whirlpool Oven Sensor
See part 27 in the diagram
Replacing your Whirlpool Range Oven Sensor
( Grid squares measure 1x1 inch )

Oven Sensor

Works With Model SF114PXSQ1!
★★★★★
★★★★★
1 Review

Rated by 5 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$94.68
In Stock
Fix Number: FIX11749737
Manufacturer #: WPW10181986
Manufactured by: Whirlpool
Works With Model SF114PXSQ1!

Product Description

This genuine OEM part is a replacement sensor for your oven. The sensor works with the control board to measure and regulate the temperature in your oven. If the sensor has become defective, the temperature in the oven can fluctuate and read inaccurately. Other symptoms you may experience are little to no heat, or the oven getting too hot. The displayed temperature and the actual temperature can be off by over 50 degrees if the sensor is not working properly. You can use a multimeter to test if the oven sensor is faulty, and if so, it should be replaced. Please be sure to disconnect the power supply to your range before beginning this repair.

Videos For installing this part.

Replacing your Oven Sensor

Replacing your Oven Sensor

Replacing your Oven Sensor

Replacing your Oven Sensor

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ross
February 23, 2023
bake element burned out and small fire, after excitement, replaced bake element, no joy. Checked power, no breakers popped, surface and control works fine. Replaced thermostat still no bake, broil element heats fine. Checked thermal fuse, not blown. At wits end. Convection fan works fine.
For model number Matag MER8775AS0
Hi Ross, thank you for reaching out. We would recommend checking to see if you have installed the bake element correctly or not. If this is not the issue, then you may need to check the following parts: oven sensor, part number FIX11749737, terminal block, part number FIX11750972, and wire harness, part number FIX12578055. We hope this sorts out your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 5 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    john from midland, NC
  • Parts Used:
    WPW10308477, WPW10181986
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
THE OVEN WAS 10 DEGREES OFF,NOT REACHING PROPER TEMPRETURE.
THE PROBLEM I HAD COULD HAVE BEEN TWO THINGS.SO AT THE PRICE OF THE TWO THINGS WAS A GREAT PRICE.SO I INSTALLED THE TWO PARTS. PULL THE STOVE AWAY FROM THE WALL.MAKE SURE TO UNPLUG THE CORD FROM THE WALL OUTLET.ONLY TOOL YOU NEED IS A PHILLIPS SCREW DRIVER.UNCREW THE TWO SCREW.MAKE SURE TO HOLD THE WIRE LEADS BECAUSE THEY CAN FALL INTO THE INSTULATION.PULL THE TWO LEADS OFF AND THEN REPLACE THE NEW LEADS OF THE NEW ELEMENT.PUT THE TWO SCREWS BACK IN AND THATS IT FOR THE ELEMENT.WITH THE SENSOR IS EASY.THE BACK OF THE STOVE HAS ABOUT 10 SCREWS ON THE BACK OF THE STOVE.UNSCREW ALL THE SCREWS,REMOVE THE BACK COVER AND UNSCREW THE TWO SCREW,THEN UNPLUG THE SENSOR CONNECTING LEAD.REPLACE THE NEW SENSOR,AN THEN REPLACE THE SCREWS,REPLACE THE BACK COVER,REPLACE THE SCREWS.PLUG THE STOVE INTO THE WALL SOCKET.TURN THE STOVE ON,THEN SET THE TEMPRETURE AND YOU REPAIRED YOUR STOVE WITH THE PROPER OVEN TEMPRETURE. THANK YOU.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    mike from palmdale, CA
  • Parts Used:
    WPW10181986
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
oven wouldn't get hot
watched the video, went very good. connector was a little difficult, but got it.all goodmike
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Winfred G from Marshall, TX
  • Parts Used:
    WPW10181986
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Oven would not hold selected heat range
Replaced sensor and worked like a charm. Easy order on parts and easy repair.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Christina from Surprise, AZ
  • Parts Used:
    WPW10181986, WP9758079
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
my oven did not kept the temperature it kept getting colder
My husband did the work first he replaced the sensor it was really easy we both watch the how to videos and after that he started removing screws, two screws to be exact pull the sensor out unplugged it put the new sensor plugged it in put screws back about 10 minutes or less. After that he started in the oven he removed the bottom pan removed some screws removed the old igniter he did have a hard time removing one screw it was underneath the igniter but once he got out the rest was really easy thanks to the videos and your help my stove now works better than before thank you for your help
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Steve from Nolensville, TN
  • Parts Used:
    WPW10181986
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Intermittently warm (not hot) oven recepies
I watched the install video, gathered up basic tools (#2 + screwdriver, flashlight, and cleaning rags. Turned off circuit breaker, placed some heavy cardboard under front base feet (no floor scratches) and slowly slid range out enough to gain access to rear panel cover. Removed all necessary screws and slid panel away to gain access to thermistor. Detached wiring connector, removed the two screws slid old thermistor out, new one in, tighten thermistor mounting screws and attached wiring connector. Slide oven back in place, turn on circuit breaker, set clock, and bake test batch of muffins. Worked like new. Celebrated with muffins and coffee - easy peasy!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX11749737
Manufacturer Part Number: WPW10181986
Brand
Model Number
Description
Amana
4KAER5500AW0
Range - 30" ELECTRIC FREESTANDING RANGE
Maytag
4KAER5500AW1
Range
Amana
4KAER7685EW0
Range - ELECTRIC RANGE
Whirlpool
4KAER7685EW1
Maytag
4KMER7600AW0
Range - 30" ELECTRIC FREESTANDING RANGE
Whirlpool
4KMER7600AW1
Maytag
4KMER7600AW3
Range - Electric Range
Maytag
4KMER7685ES0
Range - ELECTRIC RANGE
Maytag
4KMER7685ES1
Maytag
4KMER7685EW0
Range - ELECTRIC RANGE
Whirlpool
4KMER7685EW1
Whirlpool
4KWFC120MAW0
Range
Whirlpool
4KWFC120MAW1
Whirlpool
4KWFE7685ES0
Range - ELECTRIC RANGE
Whirlpool
4KWFE7685ES1
Whirlpool
4KWFE7685EW0
Range - ELECTRIC RANGE
Whirlpool
4KWFE7685EW1
Whirlpool
4RF315PXKQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXMQ0
Range - Freestanding, Electric
Kenmore
66475272502
Range
Kenmore
66475273502
Range
Kenmore
66475274502
Range
Kenmore
66475279502
Range
Kenmore
66495272502
Range
Kenmore
66495273502
Range
Kenmore
66495274502
Range
Kenmore
66495279502
Range
Kenmore
66565025101
Range
Kenmore
66572002100
Range
Kenmore
66572002101
Range