The bake element is found in the bottom of your oven, and is responsible for providing the heat for cooking. If your oven is not coming up to temperature, the temperature fluctuates, or it is not heating at all, there may be an issue with the bake element and it should be replaced. This part is an authentic OEM part, that measures approximately 15-3/4 inches long and 16-5/8 inches wide. The terminals measure approximately 3 inches long and they are spaced 1-3/4 inches apart. The electrical measurements for this element are 2600 watts and 240 volts. Before beginning this repair, be sure to disconnect the power supply to your range.
Works with the following brands:
Whirlpool, KitchenAid, Kenmore, Roper
Works with the following products:
Range, Microwave Oven Combo, Wall Oven
Fixes the following symptoms:
Little to no heat when baking, Element will not heat, Oven not heating evenly, Oven is too hot
Part# WP308180 replaces these:
AP6007578, 14210047, 308180, 308180BULK, 311470, 311652
...
Show more, 313827, 660576, 661170, 99989645 Show less
Works with the following brands:
Whirlpool, KitchenAid, Kenmore, Roper
Works with the following products
Range, Microwave Oven Combo, Wall Oven
Fixes the following symptoms
Little to no heat when baking, Element will not heat, Oven not heating evenly, Oven is too hot
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff
February 11, 2022
Will this baking element work in my Kenmore Built-In Double Oven?
For model number 4428910-44291
Hi Jeff,
Thank you for your question. The part number listed under model number 6654428910 for the bake element is FIX11740695. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
1 Turned off power to stove at distribution box. 2 Removed oven racks to make room to work. 3 Illuminated oven interior. 4 Selected screw driver with largest grip, and correct phillips bit. 5 Undid two screws holding element to back wall of oven. 6 Gently pulled element towards front of oven to expose spade connectors to internal wiring.
... Read more7 Separated connectors and removed element. 8 Replaced with new element by retracing steps 7 through 1. 9 Success! Two difficulties: A. The retaining screws were stuck with age, and required a large torque to release. B. Similarly the spade connectors were stuck and required care to separate without damaging the wiring.
Removed 2 screws that attach element in place. Pulled element out and disconnected the wires. Replaced with new element. Attached the wires and replaced the screws. Project took less than 20 minutes from start to finish.
Not a range but an oven (oven not a pull down choice on this site). Easy enough to remove old upper and lower elements. Replacing with new ones also easy with perfect fit. Only would caution to secure electric leads that clamp onto coils since they might slip back into oven wall and may be hard to retreive.
First I turned power off of stove, Unscrewed the screws, pulled it out so I could hold on to the wires, pulled old wires off and put new wires on. Went very easy.
opened your box....put the element in with a screw driver within 5 minutes. THANK YOU for your service and selection. We appreciate not having to buy a new oven at this time.
Unscrewed element from back, pulled out wires about 3-4 inches, used pliers to disconnect it from wires and slipped new one in its place. Screwed new element to back. Done! Easy enough for a woman to do it.
24 year old heating element disintegrated in a white flame that destroyed itself
Disconnected the element from the wires attached by simple clips Received the new element in 2 days and slipped on the clips and have a functioning oven again with minimal trouble and expense. Thanks to this site
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
★
Customer Reviews
Average Rating:
(1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
1
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nora G - January 14, 2020
Verified Purchase
Five stars
The item was perfect,easy to install and is working perfectly
Model Compatibility
This part works with the following models:
Fix Number: FIX11740695
Manufacturer Part Number: WP308180
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.