Jump to:
Product Description
This temperature sensor detects the temperature within the oven cavity.
-
Works with the following brands:Maytag, Magic Chef, Jenn-Air, Amana
-
Works with the following products:Range, Wall Oven, Microwave Oven Combo
-
Fixes the following symptoms:Little to no heat when baking, Oven not heating evenly, Will Not Start, Oven is too hot
-
Part# 12001655 replaces these:AP4009456, 1365, 12001655, 04000051, 12001356, 12001555 ... Show more , 12001655, 12001655VP, 74002625, 74003094, 74003413, 74004470, 74004944, 74005192, 7430P001-60, 7430P002-60, 7430P004-60, 7430P007-60, 7430P007-60K, 7430P009-60, 7430P041-60, W10127322, Y04000051 Show less
- Works with the following brands:
- Maytag, Magic Chef, Jenn-Air, Amana
- Works with the following products
- Range, Wall Oven, Microwave Oven Combo
- Fixes the following symptoms
- Little to no heat when baking, Oven not heating evenly, Will Not Start, Oven is too hot
- Part# 12001655 replaces these:
- AP4009456, 1365, 12001655, 04000051, 12001356, 12001555, 12001655, 12001655VP, 74002625, 74003094, 74003413, 74004470, 74004944, 74005192, 7430P001-60, 7430P002-60, 7430P004-60, 7430P007-60, 7430P007-60K, 7430P009-60 ... Show more , 7430P041-60, W10127322, Y04000051 Show less
Part Number Cross Reference
Videos For installing this part.
Replacing your Short Oven Sensor Kit
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Donna from SALEM, NH
- Parts Used:
- 12001655
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Oven not reaching temperature
Unplugged oven..inside upper left in oven removed 2 screws pulled out oven temp sensor.unplugged plugged in New one replace 2 screws done
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- D'Anne from Clarksville, TX
- Parts Used:
- 12001655
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Wrench set
The oven would not reach set temp and would just stay low always saying preheating.
We removed the back panel of range- very easy to do. The sensor was inside the oven -upper left hand corner. We unscrewed it and pulled it out from the back-inserted new one and put everything back in reverse order. Saved major dollars. The part was the right one. But if I could rate the service of this site as better than the part then
... Read more
that is what I am doing. Will be my go to for all appliance parts..
Read less
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- bob from WOODSTOCK, GA
- Parts Used:
- 12001655
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
replace old sensor
empty oven, remove door (see youtube), put out range to limit of gas line, remove back cover screws on left side facing range,
pull back cover until you see 2 wires coming out of range -
disconnect coupling.
remove sensor upper left 2 screws. install new,connect, put in screws, replace range.
pull back cover until you see 2 wires coming out of range -
disconnect coupling.
remove sensor upper left 2 screws. install new,connect, put in screws, replace range.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GLEN from College Station, TX
- Parts Used:
- 12001655
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
OVEN WOULDNT HEAT TO CORRECT TENPERATURE
CHANGE THE TEMPERATURE SENSOR AND THAT FIXED THE PROBLEM
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Clarence from Creal Springs, IL
- Parts Used:
- 12001655
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Did not reach temperature set on control board
had to take back panel off to disconnect wire but it was easy after that replace sensor and put back panel back on watch how to video here, just followed instructions Had to replace the ignitor also that was the problem. it would not light the oven burner it turn red but it was not hot enough ignit oven
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- frederick from silver creek, NY
- Parts Used:
- 12001655
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
glow coil would not come on
checked out the glow coil with meter and found out it was ok. When I went on line they stated it could be the glow coil or the short oven sensor I ordered the sensor on line within three days received part. It comes with different adapters and I had to use one and it went in very nicely. hardest problem was just getting the wiring out
... Read more
of the hole once I came to the connector. Installed in minutes great video on line to help you through it.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bernice from Houston, TX
- Parts Used:
- 12001655
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Oven taking long time to reach baking temperature and baking unevenly.
Hardest part was the wait for help to pull my drop-in range out for repair, then only took about 30 minutes. Still noticing it over 20 minutes to reach the proper temp but noticed that when I pushed the over door to close tighter that the heat increased quicker so I am ordering the door gasket now as that must have been part of the uneve
... Read more
n heat. Thank you so much for your help.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat to temperature.
We had problems with the stove for along time we kept having to replace the igniter ,I found online and watched the video's and learned more on troubleshooting problems Thank you very much., it was very easy.Thank you so much for selling these parts you definitely have the best price also Thank you again . WATCH THE VIDEOS
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Martha from Macedon, NY
- Parts Used:
- 12001655
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Intermittent error codes (F2, F3)
This was so easy! On this model, the oven sensor is attached inside the oven. I removed two screws to release it - and had to remove the back panel of the oven to release the electrical connection. The oven sensor then was easily removed in the oven along with the wire and connector. I then fed the new connector and wire through the h
... Read more
ole in the oven, secured the new oven sensor with the two screws, connected the wires in the back, replaced the back panel and finished! It works great now. This is a great range - was purchased 22 years ago and has had no problems until this.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Thomas B - May 27, 2020
Verified Purchase
Worked great
Easy to install
Model Compatibility
This part works with the following models:
Fix Number: FIX2003225
Manufacturer Part Number: 12001655
Manufacturer Part Number: 12001655
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.