Part Location Diagram of WPY04100166 Whirlpool Delta Frame Surface Unit - 8 Inch
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Delta Frame Surface Unit - 8 Inch

Rated by 8 customers 

?

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$44.59
In Stock
Fix Number:
FIX11757481
Manufacturer #:
WPY04100166
Manufactured by:
Whirlpool

Product Description

This 8 inch surface burner with reinforced delta frame carries 2100 watts and 240 volts. It has five turns and is compatible with many electric ranges. Its center medallion is all black in color.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.6 / 5.0, 8 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Brian from Cincinnati, OH
Parts Used:
WPY04100166, W11121640, 330031
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Bad plug in socket. I purchased a new heating element and infinite control switch but will use as a backup as it was not necessary.
Turned off power at the curcuit breaker. Verified power off. Lifted cooktop out of countertop opening. Removed 10 screws holding the cooktop to the pan. Disconnected the wire at the infinite control switch. Remove small phillips screw holding the surface plug in block to the burner opening. Spliced the connectors to the new plug in block. Twisted the wires together and applied wire nut included in the kit. Placed shrink wrap sleeve over wire nut and heated with hair dryer to shrink the sleeve. Reversed the disassembly . Turn power back on and tested good.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paula from Richmond, VA
Parts Used:
WPY04100166, WPY04100165
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the old elements were old and worn.
I simply pulled put the old elements and pushed in the new. It tool\k me all of about five minutes
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Virginia beach, VA
Parts Used:
WPY707454, WPY707453, WPY04100166, 715878, 715877
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Shiny finish pitted and rusted
Inserted new parts. Caution required when taking out and replacing chrome rings around burners. Sharp edges.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paula from Hilton Head, SC
Parts Used:
WPY04100166
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The metal strips holding the Jenn-Air burner together came apart
A new Jenn-Air burner was delivered and replaced the old one. The large size matching the model numbers was plugged in and works perfectly.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Edmond, OK
Parts Used:
WPY04100166
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Burner would not heat consistantly.
Pulled the old one out, plugged the new one in. Easy and cooked on it the whole day it was installed.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sandra from Ashland, VA
Parts Used:
WPY04100166
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
My surface element had worn through.
I simply ordered the new part, removed the old element and installed the new one. It was an easy fix and one that was not costly!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian from Fresno, CA
Parts Used:
WPY04100166, 12001676
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
one eye was not working on my stove
I had one eye not working and the element was broken. I called customer service person was able to guide me to the parts I needed. I was able to follow the instructions that cams with the parts and I was able to repair my stove to as good as new.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anne from Novato, CA
Parts Used:
WPY04100166, WPY04100165
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
burners showed age
This was the simply the easiest diy I've ever done! I first went to The Box store and ended up Returning Everything. Went to this site, found the parts easily plus they cost less..Ty
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11757481
Manufacturer Part Number: WPY04100166
Brand
Model Number
Description
Kenmore
22305
Miscellaneous - Small Appliance
Kenmore
22601
Range - Conventional element cartridge plug-in element
Jenn-Air
CCE1400W
Cooktop - Electric
Jenn-Air
CCE1400W-C
Cooktop - Electric
Jenn-Air
CCE407W
Cooktop - Electric
Jenn-Air
CCE407W-C
Cooktop - Electric
Maytag
CDE820
Range - Electric
Maytag
CDE850
Range - Electric
Maytag
CDE851
Range - Electric
Maytag
CDE852
Range - Downdraft, Electric
Maytag
CLE700
Microwave Oven Combo - Electric
Maytag
CNE200
Range - Freestanding, Electric
Maytag
CRE200
Range - Electric
Maytag
CRE200B
Range - Electric
Maytag
CRE300
Range - Electric
Maytag
CRE300B
Range - Electric
Maytag
CRE350
Range - Electric
Maytag
CRE350B
Range - Electric
Maytag
CRE400
Range - Electric
Maytag
CRE400B
Range - Electric
Maytag
CRE500
Range - Electric
Maytag
CRE500B
Range - Electric
Maytag
CRE600
Range - Electric
Maytag
CRE600B
Range - Electric
Maytag
CRE650
Range - Electric
Maytag
CRE682
Range - Electric
Maytag
CRE682B
Range - Electric
Maytag
CRE700
Range - Electric
Maytag
CRE750
Range - Electric
Maytag
CRE750B
Range - Electric