OEM Maytag Range 8" Infinite Burner Switch [WP7403P239-60] | Ships Today | Fix.com
8" Infinite Burner Switch – Part Number: WP7403P239-60
8" Infinite Burner Switch – Part Number: WP7403P239-60 8" Infinite Burner Switch – Part Number: WP7403P239-60 8" Infinite Burner Switch – Part Number: WP7403P239-60 https://fixcom.azureedge.net/Schematics/Maytag/40653.gif

8" Infinite Burner Switch

Your Price
$49.95

Fix Number: FIX11744487

Manufacturer #: WP7403P239-60

Manufactured by: Whirlpool

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This infinite switch for eight inch range burners is almost three inches long.

Works with the following brands

Maytag, Magic Chef, Crosley, Whirlpool, Jenn-Air, Admiral, Norge, Amana, Hardwick, Kenmore, Litton

Works with the following products

Range, Microwave Oven Combo, Cooktop, Wall Oven

Fixes the following symptoms

Element will not heat

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 7 reviews
Customer:
Richard from Colfax, WA
Parts Used:
  • 8" Infinite Burner Switch
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
8" burner (no heat conrol
Replaced burner plate switch. Now works fine.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Robert from Navarre, FL
Parts Used:
  • 8" Infinite Burner Switch
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Element would go to full heat at low knob settings
Unplug range from outlet. Remove back panel, (4 nut screws). Took off switch knob, removed 2 screws on front panel and removed switch. Set to the side old switch with wires on the switch. Installed switch putting 2 screws on front panel. Put wires on new switch as on old switch. then replacing back panel with 4 nut screw. Plug in range to electrical outlet. Put knob on new switch
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
George from Graham, NC
Parts Used:
  • 8" Infinite Burner Switch
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Difficult access to screws under switch mounting plate,
Bent interfering plate to provide access to screw, Removed screws at back of switch mounting plate, Video did not show interfering plate,
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Marie from Salmon, ID
Parts Used:
  • 8" Infinite Burner Switch
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Radiant element stayed on high
To make sure this was the part needed, I took the glass top off the top front of the stove to see if the element was broken. No breaks. Received the new part. Disconnected power. Unscrewed the two screws on the front switch, took the top metal back cover off, wire by wire replaced the infinite switch in back, put the two screws back on the front. Turned power back on. The element went on from low to high to low. Perfect. Then, I asked my husband to put the glass top back on the stove and he crushed the biggest element. Lesson learned.....
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Doug from Dover, DE
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Element would not heat
Take out 2 small screws under the lip of the stove top. Turned off the electric after I found out it was live under the top... pulled one wire off at a time and matched and installed in the new element.. 2 screws to take out old element and reinstalled 2 screws to the new element. Turned back on the electric and fastened the 2 screws under the lip of the top..works great
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Barbara from Indianapolils, IN
Parts Used:
  • 8" Infinite Burner Switch
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Right front 8 in burner had only two settings off or on full red hot.
One wire at a time after removing the back panel. Easy job.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Wanda from Thurman, OH
Parts Used:
  • 8" Infinite Burner Switch
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Heater control for right front burner
Removed back panel, unplugged the old part and plugged in the new one. Works great. Saved on ordering and also labor. Got instructions on internet.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

Fix Number: FIX11744487
Manufacturer Part Number: WP7403P239-60
Brand
Model Number
Description
Magic Chef
3500PPA
Range
Magic Chef
3500PPW
Range
Magic Chef
3500PPW-D
Range
Magic Chef
3500SPA
Range
Magic Chef
3500SPW
Range
Magic Chef
3510KPA
Range
Magic Chef
3510KPW
Range
Magic Chef
3510KRA
Range - Freestanding, Electric
Magic Chef
3510KRW
Range - Freestanding, Electric
Magic Chef
3510PRA
Range - Freestanding, Electric
Magic Chef
3510PRV
Range - Freestanding, Electric
Magic Chef
3510PRW
Range - Freestanding, Electric
Magic Chef
3512WPA
Range
Magic Chef
3512WPW
Range
Magic Chef
3512WRA
Range
Magic Chef
3512WRW
Range
Magic Chef
3520SPA
Range
Magic Chef
3520SPW
Range
Magic Chef
3520SRA
Range
Magic Chef
3520SRW
Range
Magic Chef
3521WPA
Range - Freestanding, Electric
Magic Chef
3521WPV
Range - Freestanding, Electric
Magic Chef
3521WPW
Range - Freestanding, Electric
Magic Chef
3521WRA
Range - Electric
Magic Chef
3521WRV
Range - Electric
Magic Chef
3521WRW
Range - Electric
Magic Chef
3521XPA
Range
Magic Chef
3521XPW
Range
Magic Chef
3521XRA
Range - Electric
Magic Chef
3521XRW
Range - Electric