OEM Maytag Range Bake Element [WP74010750] | Ships Today | Fix.com
Bake Element – Part Number: WP74010750
( Grid squares measure 1x1 inch )
Bake Element – Part Number: WP74010750 https://fixcom.azureedge.net/Schematics/Maytag/54971.gif

Bake Element

5 Reviews
Your Price
$38.87

Fix Number: FIX11744404

Manufacturer #: WP74010750

Manufactured by: Whirlpool

Part description

This bake element has push-on terminal ends. NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.

Works with the following brands

Maytag, Magic Chef, Jenn-Air, Crosley, Amana, Admiral, Kenmore, Norge, Whirlpool

Works with the following products

Range, Wall Oven

Fixes the following symptoms

Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start

Videos For installing this part.

Installation InstructionsProvided by FIX customers like you

Average Repair Rating: 4.0 / 5.0, 22 reviews ?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jason from Peabody, MA
Parts Used:
WP74010750
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Bake Element was burnt out.
Turn the breaker off, unscrew the old bake element. Carefully pull the element out, exposing the wires through the insulation. Remove the wires from the element and plug into the new element. Screw the new element into place and turn the breaker back on.
2 of 2 people found this instruction helpful.
Were these instructions helpful?
Customer:
David from Odenville, AL
Parts Used:
WP74010750
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Bake element burnt in two
First unplug of flip breaker to range. This is very important since voltage is always supplied to one side of element. I found that out the hard way. Then locate the two Phillips head screws that hold the element to the inside back of range. Then pull element carefully out. Then unplug terminals attached to element connections. Plug up the new one reinstall element and reinstall Phillips head screws. Restore power to range and turn on so element can burn off any residue and you can verify repair. That's it very simple.
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Leslie from Burns, OR
Parts Used:
WP74010750, W11233072
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
oven not heating
Can't believe I did this by myself. Followed the trouble shooting guide on this site, ordered the part, and after looking at the directions on the website had it installed in under 30 minutes! Learning to do lots of things since my husband passed away and this site was awesome.
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Barbara K from Spring Creek, NV
Parts Used:
WP74010750
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
The bake element sparked and burned through.
The part was perfect but then we hit trouble. Took out the screws, no problem Gently pulled the element out to get to the wires, problem, wires detached. We had to move the stove out to get to the wires in the back. The wires were so short that no way would they have come out the front.The wires hooked up easily, but moving the stove required jockeying it around the downdraft fan. This took brute strength. As usual things did not go suite as easily as they were supposed to.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Kathryn from Dardenne Prairie, MO
Parts Used:
WP74010750
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
'Bake" feature didn't heat/or light up.
All I did was replace oven with a new bake element (bottom of oven) and "bake" feature worked again!
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Ramon from Hyde Park, MA
Parts Used:
WP74010750
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Original Bake Element had a hole
The Bake Element was fairly easy to replace. With a Philips Screwdriver I removed the original bake element. The most difficult part was removal. The screw was set in there good. But after removal of the screw it was easy to remove the bake element and install the new one. I removed the 2 screws, unhooked the bake element, replaced the back element, replaced the screws and all set.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Cynthia from Geneseo, IL
Parts Used:
WP74010750
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Heat element in my oven.
So, so easy!! Can't believe I paid a repairman the first time it went out! Spent almost $100.00 for the part, and labor, and truck charge! This only cost me a little under $30.00! Tutorials saved me so much money! Love this company! Thank you ! Follow the tutorial, and it is easy peasy!
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Raymond from Long Prairie, MN
Parts Used:
WP74010750
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
burnt out oven bake element
removed two retaining screws pulled old element out far enough to unplug both ends,compaired old part with new, then plugged new part in put it into place replaced the two retaining screws and done. The new part came fast, exact fit,oven works like new. Very happy with the service from order to delivery, will use them in the future for my parts.I give this supplier a two thumbs up. Thanks!!!!
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
JAMES from MOSELEY, VA
Parts Used:
WP74010750
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
There was a flash in the oven and the element burned a hole in itself
Watching the video took 15 minutes start to finish part fits perfect part select is a great resource
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Ardell from Liberty, KY
Parts Used:
WP74010750
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
One of the screws was rusted to the point it would not turn at all. My daughter had to drill it out.
Once the screw was out, I pulled out the unit until I was able to see where it was attached to the wire. But, I didn't understand how or where it came apart. I am 67 years old and had never had to do anything like this before. My husband always took care of that stuff. I called my son, he walked me through the process. Then he said "watch the video". I did. Then I could see what was what. They were a little hard to pull apart, but I managed. Now I am baking!
0 of 1 people found this instruction helpful.
Were these instructions helpful?

Customer Reviews

Average Rating (5 Reviews):
5
out of 5
Filter By Rating:
  • 5
    5
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

This part works with the following models:

Fix Number: FIX11744404
Manufacturer Part Number: WP74010750
Brand
Model Number
Description
Kenmore
62945775
Range
Kenmore
62945776
Range
Kenmore
62945779
Range
Kenmore
62946795
Range
Kenmore
62946796
Range
Kenmore
62946799
Range
Amana
ACS4140BB
Range - Electric
Amana
ACS4140BW
Range - Electric
Admiral
AER1110AAH
Range - Freestanding, Electric
Admiral
AER1110BAH
Range
Maytag
AER1140AGH
Range
Admiral
AER1150AAH
Range - Built-in, Electric
Admiral
AER1350AAH
Range - Freestanding, Electric
Admiral
AER1350AAL
Range - Freestanding, Electric
Admiral
AER1350AAT
Range - Freestanding, Electric
Admiral
AER1350AMH
Range
Admiral
AER1350BAH
Range
Admiral
AER1350BAT
Range
Maytag
AER1360AGW
Range - Freestanding, Electric
Maytag
AER1360BGW
Range - Freestanding, Electric
Admiral
AER1450AAH
Range - Freestanding, Electric
Admiral
AER1450BAH
Range
Admiral
AER2350AMH
Range - Built-in, Electric
Amana
AER4111AAW
Range - Freestanding, Electric
Amana
AER4311AAW
Range - Freestanding, Electric
Amana
AER5511AAB
Range - Freestanding, Electric
Amana
AER5511AAQ
Range - Freestanding, Electric
Amana
AER5511AAW
Range - Freestanding, Electric
Amana
AER5511ACB
Range - Freestanding, Electric
Amana
AER5511ACW
Range - Freestanding, Electric