Part Location Diagram of 12400035 Whirlpool Flat Style Oven Igniter Kit
See part 8 in the diagram
Replacing your Magic Chef Range Flat Style Oven Igniter Kit
( Grid squares measure 1x1 inch )

Flat Style Oven Igniter Kit

Works With Model 31001SAA!

Rated by 32 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$57.79
In Stock
Fix Number:
FIX1573892
Manufacturer #:
12400035
Manufactured by:
Whirlpool
Works With Model 31001SAA!

Product Description

This flat style oven igniter kit is a genuine OEM replacement part for your gas range. When the igniter glows white hot, the heat opens the gas valve and ignites the fuel heating the burner assembly. If your igniter is only glowing orange or red, or not glowing at all, it will need to be replaced. This kit includes the igniter, ceramic wire nuts, an insulation pad, a metal bracket, and a variety of plug ends. This kit can be used for both short or long igniters, and the bake or broil element. However, it is not compatible with ranges that require round style igniters. The igniter has an amperage between 3.3 and 3.6. The element is very fragile and should be handled with care. Before beginning your repair be sure to disconnect both the power and gas supply to your range.

Videos For installing this part.

Replacing your Flat Style Oven Igniter Kit

Replacing your Flat Style Oven Igniter Kit

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Davd
September 14, 2022
Hi, I watched the video and this does not look so hard. I was about to order the part, but I have a quick question. My oven does not have a gas turn-off valve. I can unplug it from the outlet, but my question is can I make this repair without shutting off the gas? When I take off the assembly to change the igniter will gas be released if I don't shut it off? Thanks!
For model number magic chef 31213wav
Fix.com logo
Hello, thank you for asking! For safety purposes, it is important that during the installation process the oven should not have any gas supply. We would recommend cutting off the gas supply to the oven during the performance of the procedure. We hope this helps!

Was this helpful?
Thank you for voting!
Produce Preserver Filter
$21.56
In Stock
Cooktop Cleaning Cream
$15.55
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.60
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.10
In Stock
Cooktop Cleaner
$17.76
In Stock
Affresh Cleaner
$19.10
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 32 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
David from ENCINITAS, CA
Parts Used:
12400035
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Wall oven would take a very long time to ignite.
One of the 2 screws that holds the igniter to the burner assembly was stripped and difficult to get out. Other than that it was an easy fix.
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Evelyn from Marietta, GA
Parts Used:
12400035
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Igniter burned out.
My husband read the instructions and unplugged the electricity and turned off gas - removed door took bottom of oven out - removed the igniter-replaced it with the new part, plugged it into back of oven, pushed it in until it clicked, put everything back in as it came out. It took about 10 minutes. Worked great- oven working wonderful a nd my husband did a great job.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael J from Manalapan, NJ
Parts Used:
12400035
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Oven wouldn't light
4 screws to remove, unplug wired connection, removed old ignitor, replaced with new one. No need for extra parts or wires that came with kit. Only difficulty was lighting, and positioning to get to screws that held ignitor in place, otherwise simpler then expected. Saved myself $150/$200 on service call. Thanks to this site and some YouT ube searching.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Kersey, PA
Parts Used:
12400035
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Oven took too long to reach temperature
Remove oven door and bottom pan. Replace igniter by following simple intallation sheet.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elizabeth from Rialto, CA
Parts Used:
12400035, 8009
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Oven and stovetop did not work,electronic ignitor became disabled.
My Magic Chef stove is 25 yrs. old, I thought I would have to purchase a new appliance. However, my boyfriend watched the video and followed the step by step instructions. Both stovetop and oven are working perfectly. Thanks, Liz
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Lake Wales, FL
Parts Used:
12400035
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Burnt out Glow Igniter, which would not light the Oven.
I watched the instruction video and followed all the steps. I was amazed how easy it was to change the Igniter.I had no problems at all. I had it install in less than 15 minutes.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anne from Hermosa Beach, CA
Parts Used:
12400035
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
The flat igniter no longer heated up properly
First I watched a few videos (from this site and on YouTube). Then I took apart the oven as directed, measured the old igniter, ordered the new one. When it arrived after a week, I cut off the coupler, stripped the ends to have 3/8 in. showing, used the ceramic caps to wire the new igniter in place. Replaced the insulation provided, screw ed everything back in place, connected the electricity and gas and was done. Because the oven is so old, it took a while longer than I expected to loosen the parts, but everything went back together fairly easily.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Brainerd, MN
Parts Used:
12400035
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
Oven wouldn't light but broiler would.
When by instruction and it went smooth.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Ash Fork, AZ
Parts Used:
12400035
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Wall oven would not lite.
Watched the video. Removed burner tube, unplugged igniter and replaced with new unit. Total time for repair approximately 15 minutes. Part delivered on time without problems.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Arlington, TX
Parts Used:
12400035
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Inoperable igniter.
Removed mounting screws. Pulled connector out from behind back part of oven and disconnected. Performed reverse of de-installation method and confirmed proper oven operation.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3

Model Compatibility

This part works with the following models:
Fix Number: FIX1573892
Manufacturer Part Number: 12400035
Brand
Model Number
Description
Admiral
1088AF-CKZ
Range - Freestanding, Gas
Admiral
1088WF-CKZ
Range - Freestanding, Gas
Magic Chef
1100PAW-K
Range - Freestanding, Gas
Magic Chef
1100PAW-KL
Range - Freestanding, Gas
Magic Chef
1100PRA-K
Range - Freestanding, Gas
Magic Chef
1100PRW-K
Range - Freestanding, Gas
Kenmore
11111
Wall Oven - GAS WALL OVEN
Magic Chef
1111WAW
Range - Freestanding, Gas
Magic Chef
1111WAW-L
Range - Freestanding, Gas
Magic Chef
1111WRA
Range - Freestanding, Gas
Magic Chef
1111WRW
Range - Freestanding, Gas
Maytag
11EA-1KW
Range - Maytag Range/Stove/Oven Model 11EA-1KW (11EA1KW, 11EA 1KW) Parts
Magic Chef
11JA-10K
Range - Gas
Magic Chef
11JA-1KW
Range - Gas
Magic Chef
11JA-2KW
Range - Gas
Magic Chef
11JK-10K
Range - Gas
Magic Chef
11JK-1KW
Range - Gas
Magic Chef
11JK-2KW
Range - Gas
Magic Chef
11JN-10K
Range - Gas
Magic Chef
11JN-1KW
Range - Gas
Magic Chef
11JN-2KW
Range - Gas
Magic Chef
11JS-10K
Range - Gas
Magic Chef
11JS-1KW
Range - Gas
Magic Chef
11JS-2KW
Range - Gas
Magic Chef
11JY-10K
Range - Gas
Magic Chef
11JY-1KW
Range - Gas
Magic Chef
11JY-2KW
Range - Gas
Admiral
1375H-KLZW
Wall Oven - Freestanding, Gas
Admiral
1375HW-KLZW
Wall Oven - Freestanding, Gas
Admiral
1375HW-KZW
Wall Oven - Freestanding, Gas