Part Location Diagram of WP3412D024-09 Whirlpool Burner Head Cap with Spark Electrode
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Burner Head Cap with Spark Electrode

Works With Model GN3277XUA!
★★★★★
★★★★★
1 Review

Rated by 3 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$67.94
In Stock
Fix Number:
FIX11741732
Manufacturer #:
WP3412D024-09
Manufactured by:
Whirlpool
Works With Model GN3277XUA!

Product Description

This is a black burner head with the spark electrode. NOTE: This part has been updated and there is no longer a gasket seal required.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
MICHAEL from VALLEY STREAM, NY
Parts Used:
WP3412D024-09
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Burner head rusted thru with gas leakage
removed electric clips(2) with pliers, cleaned them with sandpaper, slid onto new burner and tightened into place.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
NANCY from ADDISON, IL
Parts Used:
WP3412D024-09
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
The burners would not light or click and I should have realized it was the spark ignition.
This is in reply to receiving the Spark Ignition Module Kit #sub 12001596
I have a Maytag Glass cooktop purchased in 1997. After reading all the info given by others I turned off the gas and unplugged the unit. I then unscrewed (1/8 turn counter-clockwise) the 4 sealed burners. Then the disconnected the two wires connected to each burner. Next I unscrewed the two screws holding down the pan under the burner. The next trick was to get these off to expose the spark ignition mmodule. It took some work to pry them up and then realized each pan had a very thin rubber gasket so nothing could drip beneath. Now my glass cooktop could NOT be lifted up (Iwas not going to pry it as I did not want to take a chance go breaking the glass!) So I found where all the wires(RED) lead to the module. I put a piece of tape on the 4 labeling them 1-4 and also labeled 1-4 on the new module. Next I unscrewed from the bottom underneath the sealed stovetop the old module. Now the next thing that needed to be done was to replace the small terminals with the larger ones that came in the kit. After that was done I hooked up all 6 wires as there are also 2 additional wires that gone on the end-it didn't matter which was on top or bottom of the module. I lined up numbers 1-4 terminal wires, put the new module back in place and put the other parts back and it worked! Thank all of you that gave me the nerve to try and fix my cooktop! I spent $26.46 for the module. I had already purchased 4 new burners which did not solve my problem. I spent $142.65 for them and decided I would put them on and my cooktop now looks brand new. Thanks again to the woman who helped me out with finding the correct part!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice from Tallahassee, FL
Parts Used:
WP3412D024-09, 74007498
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
none
removed used burners with filter remover, cleaned area under burners thoroughly and tightened new ones by hand. Oven igniter easy to remove after removal of bottom plate of oven.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11741732
Manufacturer Part Number: WP3412D024-09
Brand
Model Number
Description
Magic Chef
22M-7KLXV8
Microwave Oven Combo - Gas
Magic Chef
22MA-7KLXV8
Microwave Oven Combo - Gas
Magic Chef
22MN-7KLXV8
Microwave Oven Combo - Gas
Magic Chef
22MW-7KLXV8
Microwave Oven Combo - Gas
Magic Chef
24MA-7CKXWV8
Microwave Oven Combo - Gas
Magic Chef
2543
Range - GAS RANGE
Magic Chef
31003KAWD
Range - Freestanding, Gas
Magic Chef
31003PAWD
Range - Freestanding, Gas
Magic Chef
31003SAA
Range - Freestanding, Gas
Magic Chef
31003SAW
Range - Freestanding, Gas
Magic Chef
3116PRA
Range - Gas
Magic Chef
3116PRW
Range - Gas
Magic Chef
31203KAA
Range - Freestanding, Gas
Magic Chef
31203KAW
Range - Freestanding, Gas
Magic Chef
31203SAA
Range - Freestanding, Gas
Magic Chef
31203SAW
Range - Freestanding, Gas
Magic Chef
31203WAA
Range - Freestanding, Gas
Magic Chef
31203WAW
Range - Freestanding, Gas
Magic Chef
31213SAA
Range - Gas
Magic Chef
31213SAW
Range - Gas
Magic Chef
31213WAA
Range - Gas
Magic Chef
31213WAW
Range - Gas
Magic Chef
31213XAA
Range - Gas
Magic Chef
31213XAW
Range - Gas
Magic Chef
3126SRA
Range - Slide-in, Gas
Magic Chef
3126SRW
Range - Slide-in, Gas
Magic Chef
3126STA
Range - Slide-in, Gas
Magic Chef
3126STW
Range - Slide-in, Gas
Magic Chef
3127XTA
Range - Freestanding, Gas
Magic Chef
3127XTW
Range - Freestanding, Gas