Switch,Micro

First step is to test all 3 door switches. I couldnt find a video of removing the switches on partselect.com, so I had to wing it. Took the case off and eventually found out the switches can be removed from the front. Then I learned another important lesson - replace all 3 switches and the holder as an assembly. I bought 2 switches but found out you cant remove the switches without destroying the holder. That was a $17 mistake. The entire assembly is only $3 more than 2 switches.

Removed cover and control panel. Discovered the thermostat had a burned connection. Removed thermostat and replaced. Small issue with new thermostat which is version 2. Both leads were large and while the previous thermostat had one small lead and the other large. I had to expand one of the connectors, cut the plastic sleeve and secure with electrical tape. The switches went in very easily and everything went back together without any problems.