Maytag/Maytag_Thumb/55584.gif
See part 23 in the diagram
Replacing your KitchenAid Range Dual Surface Element - 2500w/1200w play video
( Grid squares measure 1x1 inch )

Dual Surface Element - 2500w/1200w

$ 143.29   In Stock
Fix Number: FIX11764902
Manufacturer #: W10823692
Manufactured by: Whirlpool

Product Description

This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and heats up the area directly above it. You will need to replace the element if it does not heat up properly. As you will be working around electricity, be sure that your range is disconnected from power before you begin this repair. This is an OEM part sourced directly from the manufacturer.

Videos For installing this part.

Replacing your Dual Surface Element - 2500w/1200w

Replacing your Dual Surface Element - 2500w/1200w play video

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.7 / 5.0, 5 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      David from Chandler, AZ
    • Parts Used:
      W10823692
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    small burner element was not working on our front dual burner
    we youtubed it. ordered the part. we unscrewed the glass cooktop. un pluged all the electrical wiring from the stove. put the top upside down on a pad on the table. Took a picture of how all the wiring, screws and parts were set before we started to unscrew and unplug. removed the braces holding the elements in place, un hooked the bad element. hooked up the new one. we did this one wire at a time as to not mix them up. realigned the braces (the photos came in real handy here) screwed them back in place, put the cooktop back on the stove , reattached all the wiring, gave it a quick heat up test to make sure it worked and screwed it back in place. :)
    5 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Mark from Corsicana, TX
    • Parts Used:
      W10823692
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Nutdriver
    Dual Element Burner was losing Heat / Weekened over time
    This a Countertop Range from Magtag (almost 10 years old). Turned off circuit breaker. Pulled off knobs. Pushed Range top up from the bottom to lift out of counter (note: there was no anchors (screws) to counter) . Placed range on top of boards/slates over the cut out hole. Used Nut Driver to remove 12 screws (3 on each side) that attach Glass top to the bottom base box unit. Note: the Glass top fits down on the inside of the base box and In my case really tightly (had to cut free some insulation tape with knife/razor blade to free the glass top from base box), Took two people to separate glass top unit from base unit. When lifting glass top unit out of the base box - realized needed to remove two more screws in the back left side that holds/position the electrical cable in place. Also had to remove 2 more screws in the front of the base box to allow the glass top to be lifted high enough to get to the burner elements. Finally could now changed out burner element - re-taped with new insulation tape and put everything back together. It all worked but it was more difficult than I thought.
    1 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      James F from Cotuit, MA
    • Parts Used:
      W10823719, W10823692
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Pliers
    middle radiant element of in both elements quit working
    The replacement was really easy once you are able to get the top off the range. Unplug the power source after pulling the unit from the counter space. there are 3 screws on each side holding the top in place. remove the screws and lift the top so you can unplug the elements from their harness. this was a bit difficult as the top is heavy and awkward. used the bock of wood to hold the top high enough to unplug the elements. I then turned the top upside down on the counter. before removing the old element I unplugged each wire on the unit and plugged each one onto the new element to be sure they were in the right position. Then remove the screws and brackets holding the old element in place. Secured the new elements turned the top back up plugged the elements in aligned the top in place secured with screws plugged in the power cord and put unit back in place on counter. the only difficult part I found was trying to hold the top up to unplug the elements and plug them back in that is wre the block of wood came in handy, it supported the weight of the top while connecting the elements.
    1 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Lucy from Destrehan, LA
    • Parts Used:
      W10823692
    • Difficulty Level:
      Very Difficult
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    Dual burner did not work.
    Could not repair because the new part did not have the correct connections. Also, the new part was not a dual burner it was a large burner.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Howard from Centreville, VA
    • Parts Used:
      W10823692
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    Inside element failed
    remove old replace with new...
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX11764902
      Manufacturer Part Number: W10823692
      Brand
      Model Number
      Description
      Kenmore
      66592012100
      Range
      Kenmore
      66592012101
      Range
      Kenmore
      66592014100
      Range
      Kenmore
      66592014101
      Range
      Kenmore
      66592015101
      Range
      Kenmore
      66592022100
      Range
      Kenmore
      66592024100
      Range
      Kenmore
      66592025100
      Range
      Kenmore
      66592029100
      Range
      Kenmore
      66595012100
      Range
      Kenmore
      66595012101
      Range
      Kenmore
      66595014100
      Range
      Kenmore
      66595014101
      Range
      Kenmore
      66595015101
      Range
      Kenmore
      66595022100
      Range
      Kenmore
      66595024100
      Range
      Kenmore
      66595025100
      Range
      Kenmore
      66595029100
      Range
      Kenmore
      66595775890
      Range
      Kenmore
      66595775891
      Range
      Kenmore
      66595776890
      Range
      Kenmore
      66595776891
      Range
      Kenmore
      66595779890
      Range
      Kenmore
      66595779891
      Range
      Kenmore
      66595792000
      Range
      Kenmore
      66595794000
      Range
      Whirlpool
      8286614
      Cooktop - COUNTER UNIT
      Whirlpool
      880652124P0
      Range - Freestanding, Electric
      Amana
      AER5725QAF
      Range - Freestanding, Electric
      Amana
      AER5725QAN
      Range - Freestanding, Electric