Element, Broil

Instead of removing the whole oven unit from the cabinet, I was able to replace the element from inside the oven. From video instructions, I removed the old element as directed, but detached the electric connections to the old element from inside the oven and taped the wires to the inside of the oven so the wire connections would not slip ... Read more back behind the back wall of the oven. I think this saved a lot of time. Connecting the new element to the wire connections was a little tricky, but I was able to do it and fasten in the new element as shown in the video.

Turn off circuit breaker; remove oven door; remove racks; 4 Phillips screws (2 at oven top, 2 oven back wall). Remove top 2 first to free element brackets and top reflector pan then reinsert screws to hold top reflector pan in place; Remove 2 back wall screws and wriggle element to expose wiring (2 pairs wiring tabs red and blue wires per ... Read more pair); fasten wires w/tape to prevent their retracting into rear oven; remove wiring tabs from old element; taking care to have new element in correct orientation fasten wiring tabs; remove tape and wriggle new element in place; align element and top reflector pan and reinsert tighten back wall screws; Remove top screws, align element and reflector and reinsert screws and tighten; replace racks; mount oven door; power on; check new element.

Easy installation