Part Location Diagram of WB44X200 GE Bake Element - 240V
See part 650 in the diagram
( Grid squares measure 1x1 inch )

Bake Element - 240V WB44X200

Works With Model JKP27G*J4!
★★★★★
★★★★★
1 Review

Rated by 41 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$45.68
In Stock
Fix Number:
FIX249424
Manufacturer #:
WB44X200
Manufactured by:
GE
Works With Model JKP27G*J4!

Product Description

This part is located in the bottom of your appliance and is what supplies the heat for cooking and baking. If your oven or range has no heat coming from the element or is not heating evenly, you may need to replace the element. This repair is considered to be of medium difficulty and requires the use of a screwdriver. Other items that may help with your repair are a flashlight, and wooden clothes pins (to prevent the wires from falling back into the oven). This kit comes with two installation screws and the 240 volt bake element, which is a black metal piece approximately 13 inches wide and 16.5 inches in length. Ensure that you unplug the appliance or shut off the circuit breaker before beginning. Removing the oven racks, and even the oven door can help make accessing the bake element easier.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 41 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
greg from incline village, NV
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
30 year old bake element went south
Screws out, new ones in, done. The only thing I'll add which had me concerned was that the element photo shown on the one inch grid didn't show the mounting screws at 3.5" on center which is what my oven had. Fortunately, the picture notwithstanding, the new part was punched at 3.5" so it went right in.
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Denison, TX
Parts Used:
WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Element burned into on back left corner and element flamed up
Shut off breaker to oven and remove oven racks. Use nut driver to remove two screws on the plate at back of the oven. Carefully pull the element forward to expose the two screws that attach element to oven wires. Place forcepts or clothes pin on the oven wires to prevent them from slipping back into the oven wall. Remove the two screws an d remove old element - reverse the process to install new element. When the old element has been removed, it provides an excellent opportunity to clean the oven with no obstructions before installing the new element. Easy job.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glenn from Marietta, GA
Parts Used:
8009, WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Non functioning oven element
Removed four screws and re-attached ne element which worked immediately.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Celeste from Portsmouth, RI
Parts Used:
WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
baking element fried with flames
Kill power to oven by the circuit breaker and padlock it out so no one else can turn it on while you are working on the oven. Remove shelf units so you can comfortably reach the back of the oven. Unscrew 2 screws holding the bottom baking element to the oven back. Put lock pliers on each wire (so they don't go back into the wall). Remo ve 2 screws holding wires to element. Replace element. Replace two screws holding wires to element. Feed wires back into insulated back of oven so they don't get crimped. Attach new element with 2 screws to back of oven. Turn electricity back on. Test element.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MICHAEL from THE DELLES, OR
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Element burned in half
Turn off the breaker. Remove back wall hex screws. Pull old element slightly forward. Unscrew power screws. Put new element in and attach power back with screws. Reattach to back wall. Make sure plenty of fiberglass in there... I didn't need to add any. Very small gap is okay.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from Newman, CA
Parts Used:
WB44X200, WB44X173
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Could not keep the oven at the proper temp. and was hotter in back.
Unscrewed back plate, then used nut driver to remove wires. Put wires on new element. Tightened with nut driver put in place and screwed plate tight. Did same with bottom element. My oven works great now.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from Dillon, MT
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Oven element burn out.
Unplugged oven. Removed old element. 1.Two 5 mm metal screws held plate to oven wall, 2. 2 screws with a Phillips head connected element to wires. Reconnected with new element and reconnected to wall and it did not work. Unplugged again and removed small back cover to oven where wiring is. Suspected new element might hit frame. Bent wiri ng harness slightly so it would clear frame. Place cover on, plugged back in and it worked like a charm. Very satisfied.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lori from Lake Charles, LA
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
The lower element had a 7 inch section that melted
Shut off the breaker (of course). Got my tools together--a nut driver, screw driver, flashlight and reading glasses. There are two nuts to loosen first then screws. Replace the element and the screws, nuts and you are finished. I did turn on the oven (400 degrees) for 15 minutes to burn off any chemicals and test my handywork. Very easy t o switch out, using instructions from other customers. Thanks for the tips guys!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
sheila from farmington, PA
Parts Used:
WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Bake elements not working
Losses the elements from back of oven unscrew the old elements from the attached wire the attach new element to these wires slide carefully into the back of the oven screw in place be sure the electric is off at the electric panel when working on oven took no more than 30minutes
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from Rescue, CA
Parts Used:
WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Element exploded
I removed the old element, found a part number on the old element and ordered a new one. Thankfully they still made it as the oven was built in 1988. The part arrived and it was just as simple to install as it was to remove.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX249424
Manufacturer Part Number: WB44X200
Brand
Model Number
Description
General Electric
JK1201
Range - GE Range/Stove/Oven Model JK1201 Parts
General Electric
JK14*08
Range - GE Range/Stove/Oven Model JK14*08 Parts
General Electric
JK14*09
Range - GE Range/Stove/Oven Model JK14*09 Parts
General Electric
JK14*R3
Range - GE Range/Stove/Oven Model JK14*R3 Parts
General Electric
JK140R1BC
Range - GE Range/Stove/Oven Model JK140R1BC Parts
General Electric
JK19*08
Range - GE Range/Stove/Oven Model JK19*08 Parts
General Electric
JK25*02
Wall Oven
General Electric
JK25*R3
Range - GE Range/Stove/Oven Model JK25*R3 Parts
General Electric
JK25002
Range - GE Range/Stove/Oven Model JK25002 Parts
General Electric
JK25102
Range - GE Range/Stove/Oven Model JK25102 Parts
General Electric
JK25202
Range - GE Range/Stove/Oven Model JK25202 Parts
General Electric
JK25302
Range - GE Range/Stove/Oven Model JK25302 Parts
General Electric
JK25402
Range - GE Range/Stove/Oven Model JK25402 Parts
General Electric
JK29*06
Wall Oven
General Electric
JK29*07
Wall Oven
General Electric
JK29*08
Wall Oven
General Electric
JK29*09
Wall Oven
General Electric
JK29006
Range - GE Range/Stove/Oven Model JK29006 Parts
General Electric
JK29007
Range - GE Range/Stove/Oven Model JK29007 Parts
General Electric
JK29008
Range - GE Range/Stove/Oven Model JK29008 Parts
General Electric
JK29009
Range - GE Range/Stove/Oven Model JK29009 Parts
General Electric
JK29106
Range - GE Range/Stove/Oven Model JK29106 Parts
General Electric
JK29107
Range - GE Range/Stove/Oven Model JK29107 Parts
General Electric
JK29108
Range - GE Range/Stove/Oven Model JK29108 Parts
General Electric
JK29109
Range - GE Range/Stove/Oven Model JK29109 Parts
General Electric
JK29206
Range - GE Range/Stove/Oven Model JK29206 Parts
General Electric
JK29207
Range - GE Range/Stove/Oven Model JK29207 Parts
General Electric
JK29208
Range - GE Range/Stove/Oven Model JK29208 Parts
General Electric
JK29209
Range - GE Range/Stove/Oven Model JK29209 Parts
General Electric
JK29306
Range - GE Range/Stove/Oven Model JK29306 Parts