Drip Bowl - 6 Inch WB31T10010
- Fix Number:
- FIX244394
- Manufacturer #:
- WB31T10010
- Manufactured by:
- GE
Jump to:
Product Description
This is a genuine replacement drip bowl, that measures 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in diameter in total to its outer edge. If this part is worn, damaged or beyond cleaning, this replacement part can provide an inexpensive and simple facelift to your range. This part is sold individually, but this might be a good opportunity to inspect the other drip bowls on your appliance and replace at the same time. This is a quick and easy repair that does not require any tools. Start by removing the element from the stove top using your hands. Insert the new bowl, making sure it is aligned to where the element is plugged in and reassemble the element.
-
Works with the following brands:General Electric, Kenmore, Hotpoint
-
Works with the following products:Range, Cooktop
-
Part# WB31T10010 replaces these:AP2028056, 770169, WB31T10010, 65974, WB32T10008, WB32X10015
- Works with the following brands:
- General Electric, Kenmore, Hotpoint
- Works with the following products
- Range, Cooktop
- Part# WB31T10010 replaces these:
- AP2028056, 770169, WB31T10010, 65974, WB32T10008, WB32X10015
Questions and Answers
Be the first to ask our experts a question about this part!
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- Next >
- Customer:
- Jeffrey from SEATTLE, WA
- Parts Used:
- WB44T10010, WB31T10011, WB31T10010, WB30T10076, 40A15
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
2. Remove bake element cover. There's 2 quarter inch nuts.
3. Disconnect old element. For me there was not much play in the wires so when I disconnected the old element I lost the wire in the insulation. If this happened you can remove the central plate cover on the back of the oven and you ... Read more can easily find the wires again.
4. Connect the replacement element.
5. Screw the bake element cover back in.
6. Turn power back on.
- Customer:
- Tricia from Langlois, OR
- Parts Used:
- WB30X24400, WB31T10011, WB31T10010
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Customer:
- marty from walnut cove, NC
- Parts Used:
- WB31T10011, WB31T10010, WB24T10025
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
- Customer:
- Stephen from TRAVELERS REST, SC
- Parts Used:
- WB31T10011, WB31T10010, WB03T10167
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Customer:
- Terry from Bell, FL
- Parts Used:
- WB31T10011, WB31T10010, WB30M2
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Customer:
- Louise H from New Haven, CT
- Parts Used:
- WB31T10011, WB31T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Customer:
- Mary from Petrified Forest Ntnl Par, AZ
- Parts Used:
- WB31T10011, WB31T10010
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Customer:
- steve from SANGER, TX
- Parts Used:
- WB20K10026, WB31T10011, WB31T10010
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
- Customer:
- Harold from Hampton, GA
- Parts Used:
- WB30X46986, WB31T10011, WB31T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
- Customer:
- ED from ATCO, NJ
- Parts Used:
- WB31T10011, WB31T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- < Prev
- 1
- 2
- Next >
Model Compatibility
Manufacturer Part Number: WB31T10010
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.