Surface Burner Switch - 8 Inch - 2100W WB24T10027
Works With Model RB526DH1WW!
$122.79
In Stock
- Fix Number:
- FIX236752
- Manufacturer #:
- WB24T10027
- Manufactured by:
- GE
Works With Model RB526DH1WW!
Jump to:
Product Description
This switch controls the large burner on a range/stove top.
-
Works with the following brands:General Electric, Hotpoint, Kenmore
-
Works with the following products:Range
-
Fixes the following symptoms:Element will not heat
-
Part# WB24T10027 replaces these:AP2024074, 769694
- Works with the following brands:
- General Electric, Hotpoint, Kenmore
- Works with the following products
- Range
- Fixes the following symptoms
- Element will not heat
- Part# WB24T10027 replaces these:
- AP2024074, 769694
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- zisis from peabody, MA
- Parts Used:
- WB24T10027
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers, Socket set
the burner was on hight all the time
I pull the stove out I took the back panel out and and i found the switch behind the switch control and then i pull out the nab from the switch control in the frond panel and pull the switch out from the back and i replace the wires one at the time .That is all it takes Very ease
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Le Center, MN
- Parts Used:
- WB24T10027
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Intermittently the burner would stick on high
Very easy! Pulled stove away from the wall and unplugged the power cord, Removed 8 screws holding on the back panel, Removed the knob to access the switch mounting screws, Removed the mounting screws and removed the switch from the panel with the wires connected still. held the new switch next to the old switch and transfered the wires f
... Read more
rom the old switch to the new switch so as not to get any mixed up. Than reassembled in the reverse order as taken apart plugged it back in and tested the new switch. Only needed a screwdriver and nut driver or small socket set to do the job.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX236752
Manufacturer Part Number: WB24T10027
Manufacturer Part Number: WB24T10027
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.