Part Location Diagram of WB24T10025 GE Surface Burner Switch - 8 Inch - 2500W
See part 3 in the diagram
Replacing your General Electric Range Surface Burner Switch - 8 Inch - 2500W
( Grid squares measure 1x1 inch )

Surface Burner Switch - 8 Inch - 2500W WB24T10025

Works With Model RB757WH4WW!
★★★★★
★★★★★
1 Review

Rated by 11 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$43.29
In Stock
Fix Number:
FIX236750
Manufacturer #:
WB24T10025
Manufactured by:
GE
Works With Model RB757WH4WW!

Product Description

If your burner element is not turning on or heating up, it is possible there is an issue with the switch. The surface burner switch, also known as an infinite heat switch, is what turns your burner elements on and off, along with adjusting the temperature settings. The switch is controlled by the knob on the panel, and this knob sits on the shaft for the switch. Please note that burner knobs are sold separately from the switch. Before beginning this repair, you will need to disconnect the power supply to your range, and move it away from the wall so you can access the back panel. A helpful tip to keep your wires straight, is as you remove one from the old switch, immediately attach it to the same terminal on the new switch. If the connection is snug, a pair of needle nose pliers will help. This OEM replacement switch is designed to work with your 8-inch burner elements.

Videos For installing this part.

Replacing your Surface Burner Switch - 8 Inch - 2500W

Replacing your Surface Burner Switch - 8 Inch - 2500W

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 11 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Brigid from GLENCOE, MN
Parts Used:
WB24T10025
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
The original switch had leakage, the pilot lamp stayed on, and the burner stayed warm.
I strongly suggest anyone who doesn't have experience doing appliance repair watch the Fix.com video with a guy who really knows what he's doing showing exactly how to do it.

https://www.youtube.com/watch?v=bHprnykxmyQ
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bryant from CAMDENTON, MO
Parts Used:
WB24T10025
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Burner would not keep even heat. One moment was at low heat then surges to very high heat without touching the burner control.
Step 1: disconnected power Step 2: removed upper rear panel Step 3: removed control knob Step 4: removed two screws Step 5: plugged in wires from old unit to new unit. Step 6: reinstall new control and tighten two screws Step 7: reinstall control knob.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Mansfield, TX
Parts Used:
WB24X10130, WB17T10006, WB24T10025, WB1X500D
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Burt up reveptiical and blown switch
I just want to say thanks to this site for making access to these parts and self repairs. So easy. This was a great experience so self fulfilling and I saved a ton of money. Thank you .
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Shelbyville, KY
Parts Used:
WB24T10025
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Had to replace burner switch
Very easy just took the top cover off the back , unscrewed two screws holding the switch ,and replaced the wires one at a time from the old switch to the new one, so they were easy to keep in order.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
marty from walnut cove, NC
Parts Used:
WB31T10011, WB31T10010, WB24T10025
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Burner light staying on. front right burner staying on all the time.
Replaced burner switch . Trip breaker for range.Pull stove from wall remove six screws from back panel. Remove four wires from switch swap one at a time to new switch. Remove 2 screws from old switch reinstall in new switch cut power back on job done very simple.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
christopher from elk grove village, IL
Parts Used:
WB24T10025
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Burner stayed red
Pull oven away from the wall. UNPLUG THE OVEN. Use 1/4" bit to remove 5 screws from upper sheet metal guard on back of stove and set it aside. Connect wires one at a time from old bad switch to new one. Look at the numbers on the connectors as you go. Hard to see them, but the numbers are there and they have to match. Remove the two (tiny ) screws on the front of the control panel that hold the old switch. Get the old switch out of the way, insert the shaft of the new switch in the hole in the panel, and secure it with the two tiny screws you probably dropped into the burner. Plug it back in, push it back to the wall, and cross your fingers. That's what I did and it worked perfectly.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Murle from Greeneville, TN
Parts Used:
WB24T10025
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
8" eye on stove would go full blast red hot on a low setting
First note: Large eyes have same controllers, small eyes have same controllers. Look at their Amperage ratings and dont swap them around incorrectly. Take off rear panel, unplug wires after marking them, replace. EASY.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Beverly Hills, FL
Parts Used:
WB24T10029, WB24T10025
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Burner temperature difficult to control
Turn the breaker to off position then.remove (2) button head screws at the bottom of the panel then .pull the range away from the wall. Remove knobs and (2) screws at the top of the control panel. Pull the control panel toward you to expose the burner switches. Remove (2) screws off the burner switch. Remove one connecting wire at a tim e and transfer it to the new switch.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Terrence from ozark, MO
Parts Used:
WB24T10025
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
switch stayed on high.
Turned off power, removed top panel , replaced switch. 2 screws on bottom 4 on back side.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Miranda from Liberty, MO
Parts Used:
WB24T10025
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
The burner element would heat higher than the setting
Followed the steps in the video. It really was that easy. It took more time to put the range back in it's place than to actually change the switch.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX236750
Manufacturer Part Number: WB24T10025
Brand
Model Number
Description
General Electric
15451-0
Range
General Electric
154510
Range
General Electric
155910
Range
Kenmore
91192502990
Range
Kenmore
91192502991
Range
Kenmore
91192502992
Range
Kenmore
9119250799
Range - Kenmore Range/Stove/Oven Model 911.9250799 (9119250799, 911 9250799) Parts
Kenmore
91192507990
Range
Kenmore
91192507991
Range
Kenmore
91192507992
Range
Kenmore
91192712020
Range
Kenmore
91192714020
Range
Kenmore
91192812300
Range
Kenmore
91192812301
Range
Kenmore
91192814300
Range
Kenmore
91192814301
Range
Kenmore
91193490010
Range
Kenmore
91193490300
Range
Kenmore
91193491990
Range
Kenmore
91193491991
Range
Kenmore
91193498990
Range
Kenmore
91193498991
Range
Kenmore
91193501990
Range
Kenmore
91193501991
Range
Kenmore
91193508990
Range
Kenmore
91193508991
Range
Kenmore
91193512010
Range
Kenmore
91193514010
Range
Kenmore
91193581990
Range
Kenmore
91193581991
Range