Part Location Diagram of WB07X42948 GE BOTTOM TRIM CHANEL WHITE
See part 119 in the diagram
( Grid squares measure 1x1 inch )

BOTTOM TRIM CHANEL WHITE WB07X42948

Works With Model JBS55DM2WW!

Rated by 3 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$22.54
In Stock
Fix Number:
FIX16742549
Manufacturer #:
WB07X42948
Manufactured by:
GE
Works With Model JBS55DM2WW!

Product Description

This part is the replacement door trim for your oven. It is white in color and is approximately 30 inches long and 2 inches wide. The bottom door trim supports the outer glass from the bottom. The main reason to replace the bottom door trim is if it is cracked or damaged, or if it is corroded and you cannot close your oven door properly. This part is sold individually and is an authentic OEM part.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Catherine from Waukon, IA
Parts Used:
WB07X42948
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Damaged bottom channel trim
Removed door, disassembled panels and replaced trim
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Russel from Bainbridge Island, WA
Parts Used:
WB07X42948
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Rusted oven door bottom trim -- probably from hanging wet dish towels on the oven handle above.
Place protection on counter or floor prior to removing door. Open the oven door to horizontal position. Rotate clips at each door hinge to vertical position. Partially close oven door to intermediate position (about 45 degrees) and lift/pull door from range. Lay door glass side down. Use 1/4" nut driver to remove sheet metal screws holdin g trim to bottom of door. Use T-10 torx driver to remove two screws at the top attaching inside of oven door to handle/glass panel. Lift and separate inside of door from glass panel. Use 1/4" nut driver to remove 4 sheet metal screws holding bottom trim to side trims (2 each side) from glass panel. A small screwdriver may be needed to separate the old trim from the glass. Clean all concealed areas between glass panel and inside of door. Position new bottom trim and press toward glass to secure with tabs. Fasten new bottom trim to side trims with 4 sheet metal screws, 2 each side. Reposition inside of door on glass panel. Secure by replacing bottom screws but do not tighten. Rotate door assembly to inverted position and guide 2 top of door torx screw spacers with screwdriver (or other tool) to start screws into back of handle on each side. Tighten 2 torx screws and bottom trim screws. Replace door by holding in intermediate position (about 45 degrees) and drop/push hinges into range sides. Rotate clips on each side of oven door toward range to lock hinges in place. Close door, step back and admire your work.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Lake Forest, CA
Parts Used:
WB07X42948, WB15X10018, WB07K10043
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
Door handle had a major dent and the side brackets where cracked. AlsoThe bottom door trim was rusted solid onto the glass.
Remove the door from the main body of the oven then proceeded to remove the back of the door using an Allen wrench. Once the two Allen wrenches were removed was able to separate the back of the door from the front half.I then proceeded to remove the screwsthat held on the side channels. I then proceeded to remove the four screws that held the door handle on to the mainframe. I then removed the three screws that held the bottom rail onto the glass. This is where I ran into the problem.The bottom rail was so rusted out that it had fused onto the glass on the front of the door. Using a hammer and a very small screwdriver I had to work the bottom rail freefrom the glass. This took quite some time because I was afraid that in the process I might crack the glass. Fortunately it all turned out okay. I then continued to reassemble all pieces received and now my oven door looks like a brand-new door. With one exception. One of the end caps that I received has a slight imperfection. It has a depression in it and is not as smooth as the other one.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX16742549
Manufacturer Part Number: WB07X42948
Brand
Model Number
Description
Kenmore
91192502990
Range
Kenmore
91192502991
Range
Kenmore
91192502992
Range
Kenmore
91192507990
Range
Kenmore
91192507991
Range
Kenmore
91192507992
Range
Kenmore
91192712020
Range
Kenmore
91192714020
Range
Kenmore
91192812300
Range
Kenmore
91192812301
Range
Kenmore
91193401990
Range
Kenmore
91193401991
Range
Kenmore
91193401992
Range
Kenmore
91193402990
Range
Kenmore
91193402991
Range
Kenmore
91193402992
Range
Kenmore
91193407990
Range
Kenmore
91193407991
Range
Kenmore
91193407992
Range
Kenmore
91193408990
Range
Kenmore
91193408991
Range
Kenmore
91193408992
Range
Kenmore
91193481990
Range
Kenmore
91193488990
Range
Kenmore
91193491990
Range
Kenmore
91193491991
Range
Kenmore
91193498990
Range
Kenmore
91193498991
Range
Kenmore
91193512010
Range
Kenmore
91193514010
Range