Part Location Diagram of WB21X36771 GE INFINITE HEAT SWITCH KIT
See part 260 in the diagram
( Grid squares measure 1x1 inch )

INFINITE HEAT SWITCH KIT

Rated by 6 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$51.36
In Stock
Fix Number:
FIX16216966
Manufacturer #:
WB21X36771
Manufactured by:
GE

Product Description

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maurice
April 4, 2022
What is the replacement part number Florence the top burner infinite WB21X226 l know it’s and old unit but so am I?
For model number JBS03G
Fix.com logo
Hello Maurice, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX16216966. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

4 people found this helpful.

Was this helpful?
Thank you for voting!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 6 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Horace P. from Bainbridge Island, WA
Parts Used:
WB21X36771
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
One electric elements didn't work at all & the other one was on high setting even on low.
Went on line and down loaded instructions. Turned power off at junction box & also unplugged range from wall. Removed non-functioning infinite switch (2) and used serial # to order proper switches. The range was so old (33 yrs) I could find model # that would match. Switches arrived in 3 days, installed and working great. The only ne gative is, the wife isn't getting a new range.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Coxs Creek, KY
Parts Used:
WB21X36771
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
iNSTALLATION INSTRUCTION CONFUSING
The installation instructions that came with the switch were confusing as the new switch was to replace many different models. I just hooked the wires to the terminals that were identified (labeled) as the same though they were in different locations from the originals. None of the bushings for the knob fit the old knob so that I slippe d the knob on the shaft measured how much I had to remove and clipped off the shaft. Works fine!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ron from florissant, MO
Parts Used:
WB21X36771
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
left front element does not work
R&R the front element switch after removing the front panel.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tony from Naples, FL
Parts Used:
WB21X36771
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Burner not working /switch replacement
These instructions are for older GE electric ranges w/ an oven over the range top, and the burner and oven controls on the right side of the upper oven. 1) disconnect power at the breaker panel or unplug unit. 2) open the exhaust vent door above the upper oven and remove the same vent door by using a flat screwdriver on the spring lo aded hinge pin(s). 3) Remove the phillips screw on the right side (over the clock) that holds the control panel in place. The entire control is hinged at the bottom and once the screw is removed it will tilt out from the top and provide access to all of the burner & oven controls. (Note there is no need to move the range or access it from behind) 4) Slide the knob off the switch that is being replaced and remove the 2 screws that hold it in place. 5) Transfer the wires from the old switch to the corresponding lugs on the new switch. 6) Measure the shaft length of the old switch and adjust the length of the new shaft following the instructions provided and use the appropriate adapter provided to match your knob. 7) Install the switch with the screws provided or use the old ones. (I found that a magnetic screwdriver was helpful)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Calvin A from Homestead, FL
Parts Used:
WB21X36771
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Two burners on the stove weren't working. Two bad switches.
1. Open breaker or pull fuse block. 2. Pull stove out from the wall. 3. Remove upper back panel. You may have to remove the upper screw on the lower panel to get the upper panel off. 4. Pull the burner knob off. 5. Remove two screws that hold the switch in. 6. Transfer wire/connectors one at a time from the old switch to the new switch. 7 . Install the new switch with two screws. A binder clip may be used on the shaft to hold the switch until the screws are installed. 8. Select a plastic adapter that matches your knob. 9 Using two pairs of pliers, snap the switch shaft off at the right length. 10. Install the knob. In my case the knob sticks out a little further from the control panel than the original or other knobs. That is due to the plastic adapter. I connected power and tested function at this point. There are exposed electrical connections. Care must be taken. Remove power before proceeding. 11. Install the upper panel on the back. 12. Push the stove back into position. 13. Restore power.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edwin from Harrisburg, PA
Parts Used:
WB21X36771
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
switch not working
remove a few screws in the back panel, remove two screws from the switch. remove old wires and install new switch replace wires and screws.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX16216966
Manufacturer Part Number: WB21X36771
Brand
Model Number
Description
Kenmore
1034327610
Cooktop
Kenmore
1034327611
Cooktop
Kenmore
1034327810
Cooktop
Kenmore
1034327910
Cooktop
Kenmore
1034327911
Cooktop
Kenmore
1034327912
Cooktop
Kenmore
1034347610
Cooktop
Kenmore
1034347710
Cooktop
Kenmore
1034347711
Cooktop
Kenmore
1034347810
Cooktop
Kenmore
1034347910
Cooktop
Kenmore
1034347911
Cooktop
Kenmore
1034347912
Cooktop
Kenmore
1034348210
Cooktop
Kenmore
1034348610
Cooktop
Kenmore
1034358210
Cooktop
Kenmore
1034358290
Cooktop
Kenmore
1034367610
Cooktop
Kenmore
1034367710
Cooktop
Kenmore
1034367711
Cooktop
Kenmore
1034367810
Cooktop
Kenmore
1034367910
Cooktop
Kenmore
1034367911
Cooktop
Kenmore
1034367912
Cooktop
Kenmore
1034368110
Cooktop
Kenmore
1034368190
Cooktop
Kenmore
1034368191
Cooktop
Kenmore
1034368210
Cooktop
Kenmore
1034368290
Cooktop
Kenmore
1034387510
Cooktop