This is a temperature sensor for a range. The sensor is what detects the temperature inside the oven and is often replaced when the oven is having heating issues. Please note that the wire connector may be different from the original; if this applies to your part, cut the quick connect and wire together with porcelain wire nuts. For this DIY repair, you will need a Number 2 Phillips or Number 2 square-head screwdriver and possibly wire strippers. Make sure to disconnect the power before installing this part. You will need to pull the range from the cabinet to gain access to this part from the back of the unit.
Works with the following brands:
Frigidaire, Kenmore, Electrolux, Crosley
Works with the following products:
Range, Wall Oven, Microwave, Microwave Oven Combo
Fixes the following symptoms:
Little to no heat when baking, Oven is too hot, Oven not heating evenly, Element will not heat
Part# 316217002 replaces these:
AP3363354, 1015027, 08017097, 316111201, 316111203, 318087600
...
Show more, 318198500, 318198510, 318198520, 5303208888, 7316217002, 9030709010 Show less
Works with the following brands:
Frigidaire, Kenmore, Electrolux, Crosley
Works with the following products
Range, Wall Oven, Microwave, Microwave Oven Combo
Fixes the following symptoms
Little to no heat when baking, Oven is too hot, Oven not heating evenly, Element will not heat
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
December 30, 2023
I need Part #316217002. I also need the female connector w/wire leads. (Original melted) that sensor connects to. Is this available and if so what is the part #? Thank you.
For model number FGET3065KFA
Hi Michael, thank you for contacting us. The part you are looking for is the temperature sensor, part number FIX820208. The connector that you are looking for comes as a part of the temperature sensor. We hope this is helpful!
Was this helpful?
Thank you for voting!
Michael
April 5, 2022
Kenmore Elite Dual Fuel Range. Large oven does not go to desired temperature. Heating element is fine. I have been recommended to replace the oven sensor (820208). The lights, timer, and clock on the control still function. The small oven and top burners still function. The question is seems is the Control Panel communicating with another part to work properly? Or will replacing the sensor solve my problem?
Thanks
Mike
For model number 790.5503
Hello Michael, thank you for your question. We would recommend the temperature sensor. Please resubmit your question on the site with the complete model number of your equipment so that we can find the correct parts for you. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Maureen
April 30, 2022
Oven Not heating, already tried replacing element, but still doesn’t heat. Is the problem the heat sensor or control panel? How do I test the heat sensor probe?
For model number PLEB30S8CCC
Hello Maureen, thank you for writing. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. You can also test the elements for continuity to be sure they are both functioning. If the sensor and elements are tested and are functioning correctly the electronic control board would be the issue. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Peter
February 17, 2023
Hello- My oven will reach it's set temp, but not retain heat. In "convect" mode it's fine. I'm leaning towards a defective temp sensor or heating element?
For model number FPMC2785KFA
Hi Peter, thank you for your inquiry. According to our research, the issue is probably with the temperature sensor and you may need to replace it with part number FIX820208. We hope this solves your problem!
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Suspected sensor based on above problem. The biggest problem was not knowing how hard it would be to get the built-in oven from its slot. Once it moved an inch, it was easy. The sensor inside the oven is a little hard to access because of the oven door. I would recommend a magnetic screw driver to make it easy to hold the sensor screw
... Read mores and allow reaching in the oven with one hand.
Remove old temperature probe and install new one. Used ceramic nuts to twist wires together. Drop in range. So slide back into place. Very simple procedure. So far, working great.
Part arrived very quickly and when I looked at it, I hesitated wondering if I could do it and if that was, in fact, the correct part to solve the problem. Did not have to pull the range out and it went real fast & was very easy to install. I researched how to replace this particular part on the internet. Went great and it solved my
... Read moreproblem. My husband was surprised it was done when he came home from work. Thank you!
Read less
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX820208
Manufacturer Part Number: 316217002
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
