OEM Frigidaire Range Flat Style Oven Igniter [5303935066] | Ships Today | Fix.com
Flat Style Oven Igniter – Part Number: 5303935066
Flat Style Oven Igniter – Part Number: 5303935066 Flat Style Oven Igniter – Part Number: 5303935066 https://fixcom.azureedge.net/Schematics/Frigidaire/59FD0SK7.gif

Flat Style Oven Igniter

Your Price
$38.59

Fix Number: FIX470129

Manufacturer #: 5303935066

Manufactured by: Frigidaire

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.

Works with the following brands

Frigidaire, Tappan, Kenmore, Gibson, Uni, Westinghouse, Kelvinator

Works with the following products

Range, Wall Oven, Microwave Oven Combo

Fixes the following symptoms

Gas igniter glows, but will not light | Little to no heat when baking | Will Not Start | Element will not heat

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 30 reviews
>
<
Customer:
John from East Quogue, NY
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Oven not igniting at times
Open and remove the lower warming drawer. There are two black clips on the rails that you need to lift and pull forward simultaneously to get the drawer out. Put it aside. This exposes the wiring for the igniter in the rear of the range. Open the oven door. Remove the grates and set aside. Using a screw driver remove the rear screws holding the bottom oven plate. Next remove the Burner guard. There is a center screw that is attached to the burner tube that will most probably be rusted and will break away. Using a socket set remove the two screws that hold the igniter. Now close the oven door and from the warming drawer area locate the two wires associated with the igniter. One goes to the left and has a plug in connector associated. Unplug it and note the colored tag. Unscrew the ceramic wire nut and detach the plug from the igniter wire. Locate the other wire and remove from the ceramic wire nut. Open the oven door and carefully pull the wires from the hole running beneath to the warming drawer and remove the old igniter. Take the new igniter and fish the wires through to the warming drawer area. Refasten the wire to the plug using the ceramic wire nut and use the wire with the tag that is the same as you noted before. Re-plug into the port you removed it from on the left. Next rewire and use the ceramic wire nut for the other wire. Lastly fasten the igniter back onto the flame tube and test before putting everything back in its place. Re-install all the cosmetic parts and you are done.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
John from Niles, MI
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Oven would not lite gas stove
Moved the stove out from the wall and disconnected the electrical cord. Then disconnected the gas line. I then removed the oven bottom liner and the then the gas igniter .I then tipped the stove and disconnected the electrical wires. I did the reverse to install the new igniter, and wall-la the oven works fine now.I found this to be the safest way to do this.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Marlowe from Zimmerman, MN
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Oven would not light, but broiler and range worked fine
After removing the lower burner covers with a nutdriver and accessing the lower igniter and determining it did not glow, I checked the igniter with an ohm meter and measured 45k ohms across the wires to the igniter, confirming it could not conduct enough electrical current to glow. The replacement igniter came with enough wire to easily clip the old wires from the old igniter and use wire nuts after stripping an appropriate amount of insulation from the old igniter leads and tie them into the new igniter. Tonight's pizza confirmed the oven works flawlessly!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Howard from East Dubuque, IL
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Oven would make a bang noise when igniting!
Just replaced the igniter after following instructions on video by goggleing
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Larry from LaJose, PA
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Oven abruptly quit working
Simple repair, orderede the part from this site on Sunday, it arrived Tuesday and after opening the oven to the ignitor, removed the 2 wirenuts and 2 screws holding the ignitor in and replaced ,worked great ever since......Thank you for prompt service
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Kevin from Berea, OH
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Replace oven ignitor
Simple. No crawling into broiler. Just remove 2 screws securing bottom oven panel, and remove. Remove one nut securing flame shield (whatever it's called), then remove two screws from ignitor - easy. Clip two wires, and attach new ignitor (using porcelain wire nuts provided). So easy.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Stephen from Millers, MD
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Socket set
Gas oven rear cover needs to come off over all gas lines, etc.
The entire rear cover plus the electric cover needed to come off to access the hot wire to the flat style ignitor. This was not an option for me or even an above average technician. I removed the parts inside the oven itself including the large door itself. I cut the hot wire and installed two [male and female] connectors. Before connecting them I slide a 6" heavy duty cable cover to cover the small amount of metal on the connectors for when attached and leaning against the oven bottom. Did half this again for the ground wire attached immediately below the ignitor. [female end only, as the male end was still in place to attach to.] Needed high heat tape to attach the cable cover once everything is in place. ran a couple of on/off trials before putting everything back together. Works fine, but is a good thing I had the extra wire parts I needed. Wire nuts would not have been a choice for me in the bottom of the oven. The job is still do-able. Be thorough with attaching everything tightly. This is a 10 year old propane Frigidaire range.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
aj from san diego, CA
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Oven did not fire up
unplugged the stove/oven and shut off the gas. to access the igniter underneath the oven, remove the oven broiler drawer out of the stove. you will see the igniter in the middle of the oven pan screwed to a bracket next to the gas line. you will have to unscrew the igniter form the bracket and then undo the wires from their connectors. one of the wires runs to a plastic connector that attaches to a coupling about 8 inches from the other. once out, you will have to splice the connectors form the old igniter to the new igniter. you can do this many ways. I cut the connectors off the old igniter and slid some shrink wrap before soldered the connectors to the new igniter. once soldered I heated the shrink wrap to make the connections solid. make all the connections back accordingly. screw the igniter back on the bracket, install the drawer back in the broiler rack. turn the gas back on, plug the stove/oven back in the socket and ignite your oven. it might take about 30 sec or so for the igniter to fire up. for me, it seemed like it fired up faster after a couple of starts. if your not good at soldering you might be able to use wire nuts....I just would not trust them with the amount of heat under the broiler fyi. good luck, its not difficult but you need patience.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Leonard from Chicago, IL
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Gas oder, oven not heating properly
Remove oven racks, remove lower oven panels and remove 2 screws that attach igniter cut wires and splice new igniter in reinstall lower panels and oven racks. Works like brand new!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Les from Cedar Rapids, IA
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Igniter glows but oven gas valve doesn't operate.
Turn off gas supply & unplug appliance. The replacement part is a substitute & comes with wire nuts. If you're lucky, you'll be able to remove the bad igniter with a screw driver. A screw was seized on mine & I had to remove the burner assembly. Before you cut the igniter wires, study how you will splice the new part. (It takes two hands to install a wire nut). Reassemble.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
brian from streator, IL
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Oven would not heat up properly
instruction manual online was very close to actual repair the only difference was my igniter did not go out the back of the oven. Otherwise the repair was very similar to video thank you
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Jeff from Sandusky, MI
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Oven igniter had quit working.
I removed the bottom pan of the oven. Then removed the burner deflector using a screwdriver and nut driver. Once the deflector was removed, I removed the two screws that held the igniter to the burner. I then cut the two wires and measured the length of the new ones. I then put the new wires together using wire nuts and electrical tape. I screwed the new igniter to the burner. Once everything was back together, I tested the igniter before replacing the burner deflector. Everything worked great.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Patrick from Cypress, CA
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Oven took too long to preheat or no heating was acheived.
My setup has a 1/4 turn gas shutoff valve at the wall. This I recommend so the gas for the house doesn't need to be shutoff and the gas company needs to relight all the heating by gas pilots in your home. After the shutoff, the flexible gas line was detached at the oven. Then the electrical plug was removed from the wall socket. I pulled out the oven and removed the broiler tray. I placed an old rug the size of the oven behind it and laid it down on the rug. I used the nut driver to remove the fasters for each successive aluminum cover plates. I now stood it up and used the screw driver to remove the bottom inside of the oven. Open the door oven and look for the two large Phillips head screws at the back wall corners. Once removed lift the bottom from the rear and push down and in then it should come up and out at a diagonal to the rear top of the oven. You should now see the igniter. If all goes well the fasters were not cross threaded remove and replace. I bolted the new part in place using the existing hardware. Cut the top wire on the old and defective unit and Identified the top wire on the new igniter and routed to that location where I cut and stripped the ends with enough wire length to fill the wire nut. Then repeat the process for the remaining wire.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
eric from shawnee, OK
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
The glow plug would come on but wouldn't light the stove
Sketched a quick diagram of which wires were where. Removed the bottom of the oven via two screws on the back side. Removed the gas bar two screws one front one back. Removed the igniter two screws also. Cut my wires one at a time and matched them to the new part with included ceramic wire nuts. Reinstalled the pieces and stove lit right up. Took maybe ten minutes tops.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Pamela from New City, NY
Parts Used:
  • Flat Style Oven Igniter
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Oven would not light
This repair was a snap. I took off the floor of the oven ( two screws) removed the flame deflector (one nut) and the igniter was right there. Two screws held that in and I snipped the two leads right at the igniter. The new igniter had prestripped wires-it went in with some porcelain wire nuts that came with the igniter. I did all the steps in reverse and, voila, the stove fired right up. It took me longer to take out and put back in all the bakeware that I store in the oven than it took for me to fix it! Saved a bundle, too.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

>
<

Model Cross Reference

This part works with the following models:

Fix Number: FIX470129
Manufacturer Part Number: 5303935066
Brand
Model Number
Description
Kenmore
1197028510
Range
Kenmore
1197028710
Range
Kenmore
1197028810
Range
Kenmore
1197028811
Range
Kenmore
1197028812
Range
Kenmore
1197028881
Range
Kenmore
1197028882
Range
Kenmore
1197038510
Range
Kenmore
1197038710
Range
Kenmore
1197038810
Range
Kenmore
1197038812
Range
Kenmore
1197038813
Range
Kenmore
1197038882
Range
Kenmore
1197038883
Range
Kenmore
1197048510
Range
Kenmore
1197048710
Range
Kenmore
1197048810
Range
Kenmore
1197048811
Range
Kenmore
1197048812
Range
Kenmore
1197048881
Range
Kenmore
1197048882
Range
Kenmore
1197058510
Range
Kenmore
1197058710
Range
Kenmore
1197058810
Range
Kenmore
1197058812
Range
Kenmore
1197058813
Range
Kenmore
1197058882
Range
Kenmore
1197058883
Range
Kenmore
1197078710
Range
Kenmore
1197078810
Range