OEM Frigidaire Range Bake Element [318255006] | Ships Today | Fix.com

Bake Element

&SeePartX&
Bake Element – Part Number: 318255006
Bake Element – Part Number: 318255006
https://fixcom.azureedge.net/Schematics/Frigidaire/27R58OZI.gif
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
This bake element is found on the bottom of the oven.
This part works with the following brands:
Part number cross reference:
This part works with the following products:
Range, Wall Oven.

Installation Videos

Replacing your Frigidaire Range Bake Element
Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Fixes the following symptoms:
  • Cooktop element not heating
  • Little or no heat when baking
  • Oven not heating evenly
Tools used for this repair:
  • #2 Phillips screwdriver or #2 Square-head screwdriver
  • Needle-nose pliers

Installation Instructions

Showing 1-10 of 13 Instructions
>
page 1 of 2
<

Bake element needed replacement

Removed the back panel checked for power at the base of element, had 240 volts so knew element was burnt out. Replaced element with new one from Parts Select by unplugging the wires from old element and removing 2 screws inside oven and replacing 2 screws and plugging wires into the new element. Works fine now.

Were these instructions helpful?

1 of 1 people found these instructions helpful
Parts Used: Bake Element
Difficulty Level: Really Easy
Total Repair Time: 15 - 30 mins
Tools: Screw drivers
Customer: Dale from Antigo, WI

Burned out oven heating element

1) Remove two screws holding element to back of oven. 2) Gently pull element towards you to expose wires connected to element. 3) Unplug wires from element. Reverse these instructions with new element.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Screw drivers
Customer: Richard from Lake Geneva, WI

Feet of old element broken of leaving element on bottom of oven

Gave the unit to my tenant.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element
Difficulty Level: Very Easy
Total Repair Time: Less than 15 mins
Tools:
Customer: JACKIE from Eutawville, SC

The bake element broke

I turned off power. Unscrewed element inside the over. I removed the back panel of stove to reach connection easier. Disconnected old element and removed it. placed new inside pushed ends through cotton insulation screwed to inside then went to back of stove connected new element to connectors. replaced back panel. turned on power, then oven. voila!!

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element
Difficulty Level: Very Easy
Total Repair Time: Less than 15 mins
Tools: Screw drivers
Customer: marilyn from washington, IL

Baking element in dual fuel range had burnt out

Turned off the power at junction boxes. With a Phillips head screwdriver removed 2 screws, pulled the element forward, uncoupled the two power wires from the element. Positioned the new element in the oven ensuring the element was "level", coupled the power supply wires to the new element, Re-positioned the element into the back of the oven, re-arranged the insulation around the element arms, placed the two screws securing the element in place. Power back on. Easy, peasy- back in the baking business. Proud of myself for completing this DIY project instead of spending the money to have a service man in to do the repair.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Screw drivers
Customer: Ken from Amarilo, TX

Burned out bulb and lower oven element

ordered parts; waiting for a handy man (or handy woman)...

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element , Light Bulb - 40W
Difficulty Level: Really Easy
Total Repair Time: More than 2 hours
Tools:
Customer: Carolyn from Radford, VA

Baking element no longer working.

I am a 71 year old woman and it was easy for me. I turned off the power to the oven at the breaker box. Unscrewed the old element with a phillips screwdriver. Pulled it out far enough to disconnect the wires. Then I took the new element attached the wires tightening the connectors a bit with needle nose pliers. I gently placed the wires back into the insulation then used the screws I took out of the old element to install the new one. I turned the power back on at the breaker box and proceeded to bake a dozen cookies which turned out great!

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Kathleen from Powhatan Point, OH

Heating element in oven burned out. I ordered new one on thur. And had new part on sat.

I removed 2 screws in back of oven to disconnect old element. I could not connect new one to wires so I removed back plate from stove and wires were there so I plugged into new element and replaced 2 screws in oven then replaced the panel on back of stove and all is right again. It was much easier to connect wires from back than to do it from inside the oven.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element
Difficulty Level: Easy
Total Repair Time: 15 - 30 mins
Tools: Screw drivers
Customer: Jacquelyn from Haddam, CT

Neither element would heat

Removed old elements, reaching screws was difficult. Replaced elements, did not solve problem. Called service agent.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element , Broil Element
Difficulty Level: A Bit Difficult
Total Repair Time: 30 - 60 mins
Tools: Screw drivers
Customer: Richard from Bend, OR

Bake element did not heat

My son in law turned off breaker. Removed racks and took out the two screws holding the element in place unplugged the element and plugged the new element in put screws back in and turned breaker back on. Very easy.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Bake Element
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Screw drivers
Customer: LEAH from TUNNELTON, WV
Showing 1-10 of 13 Instructions
>
page 1 of 2
<

Model Cross Reference List

This part works with the following models:

Fix Number: FIX3633414
Manufacturer Part Number: 318255006


Brand
Model Number
Description
Frigidaire
74403
Range - DUAL FUEL RANGE
Kenmore
790.46814991
Range - Kenmore Range/Stove/Oven Model 790.46814991 (79046814991, 790 46814991) Parts
Kenmore
790.46819991
Range - Kenmore Range/Stove/Oven Model 790.46819991 (79046819991, 790 46819991) Parts
Kenmore
790.76839100
Range - Kenmore Range/Stove/Oven Model 790.76839100 (79076839100, 790 76839100) Parts
Kenmore
790.99613703
Range - Kenmore Range/Stove/Oven Model 790.99613703 (79099613703, 790 99613703) Parts
Kenmore
79045062400
Range
Kenmore
79045062401
Range
Kenmore
79045069400
Range
Kenmore
79045072400
Wall Oven
Kenmore
79045074401
Wall Oven
Kenmore
79045079401
Wall Oven
Kenmore
79045252400
Range
Kenmore
79045254400
Range
Kenmore
79045262500
Range
Kenmore
79045262501
Range
Kenmore
79045262502
Range
Kenmore
79045262503
Range
Kenmore
79045662100
Range
Kenmore
79045662103
Range
Kenmore
79045669102
Range
Kenmore
79045669103
Range
Kenmore
79045669104
Range
Kenmore
79045702300
Range
Kenmore
79045704300
Range
Kenmore
79045709300
Range
Kenmore
79045712100
Range
Kenmore
79045712102
Range
Kenmore
79045712103
Range
Kenmore
79045714100
Range
Kenmore
79045714102
Range