See part F37 in the diagram
( Grid squares measure 1x1 inch )
Temperature Sensor
Works With Model LGEF3045KFE!
$47.25
In Stock
Fix Number: FIX1528542
Manufacturer #: 316490000
Manufactured by:
Frigidaire
Works With Model LGEF3045KFE!
-
Product Description
If your oven has little to no heat, is not heating evenly, or is reaching too high a temperature, there may be a problem with your oven probe. This probe, also known as an oven temperature sensor or a range probe, is found in the cavity of the oven and is used to detect the temperature within there. The probe helps the oven to maintain the desired temperature by communicating with the motherboard in the oven. You can use a multimeter to test if the probe is faulty, and if so, the probe should be replaced. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be working with electrical components. The tools required to complete this repair are a quarter-inch nut driver and a pair of needle nose pliers.
-
Works with the following brandsFrigidaire, Kenmore, Crosley, Electrolux
-
Works with the following productsRange, Wall Oven
-
Fixes the following symptomsOven is too hot, Little to no heat when baking, Oven not heating evenly, Element will not heat
-
Part Number Cross ReferencePart# 316490000 replaces these:AP3963654, 1197392, 316490002, 316490003, 7316490000
Product Description
If your oven has little to no heat, is not heating evenly, or is reaching too high a temperature, there may be a problem with your oven probe. This probe, also known as an oven temperature sensor or a range probe, is found in the cavity of the oven and is used to detect the temperature within there. The probe helps the oven to maintain the desired temperature by communicating with the motherboard in the oven. You can use a multimeter to test if the probe is faulty, and if so, the probe should be replaced. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be working with electrical components. The tools required to complete this repair are a quarter-inch nut driver and a pair of needle nose pliers.
-
Works with the following brands:Frigidaire, Kenmore, Crosley, Electrolux
-
Works with the following products:Range, Wall Oven
-
Fixes the following symptoms:Oven is too hot, Little to no heat when baking, Oven not heating evenly, Element will not heat
-
Part# 316490000 replaces these:AP3963654, 1197392, 316490002, 316490003, 7316490000
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
November 22, 2021
Can I check the Temp. control probe with av ohm meter?
For model number FGEF3055MFE
Hello Richard, Thank you for the question. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
Was this helpful?
Thank you for voting!
Nicole
June 25, 2022
My oven will not heat up past 188° I’m trying to figure out which part might be the culprit
For model number Lgef3045kfh
Hello Nicole, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the temperature sensor, the bake element, the broil element, and the control board. You can test the elements and sensor with a multimeter, and if they test good for continuity, then the issue may be with the control board. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Rob
August 22, 2022
Oven not working after self clean mode. Everything else works fine. Could it be the temperature sensor probe is bad?
For model number FFEH3054USA,VF83101843
Hello Rob, thank you for your inquiry. We have researched your model number and found that most of the time when the oven is not working properly after self cleaning, it is an issue with the temperature sensor part number FIX1528542. We hope this information helps.
Was this helpful?
Thank you for voting!
Les
November 23, 2022
Serial number VF84826914
Kenmore Gas Range Oven won't light or heat up ?
For model number 79074423810
Hi Les, thank you for your question! We recommend checking the following parts: igniter, part number FIX12071409, control board, part number FIX1528270, and temperature sensor. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Paul from Chicopee, MA
-
Parts Used:316490000
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Bake element not heating
First tried heat probe replacement but bake element still not heating. Replaced control board solving problem. Easy installation.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:mark from Traverse City, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Socket set
f10 when we used oven
pulled stove out, remove power cord from wall,remove back and replace parts .
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Greg from Belle Plaine, KS
-
Parts Used:316490000
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Oven was inconsistent on heat, typically way over-heating
Replacing the oven probe is very straightforward, I tested the old one with a multi-meter after pulling the range out (had to disconnect the gas line and unplug the range...the most difficult part of the repair, lol!) and determined it was bad; purchased the new one from this site. The probe is located in the back of the oven, easy to see once the rear shroud was taken off the range (6 screws), especially having the new one in hand and knowing what to look for. One screw held it in place, and there is a single plug to disconnect. Installation is the reverse of removal. Pushed the range back into place, reconnected the gas line and plugged it in. Repair was perfect. Saved a ton of money, for sure!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Jan from OLEY, PA
-
Parts Used:316490000
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver
oven did not work
replaced oven probe did. Did not solve problem. Returned probe, ordered oven control. Replaced the control and fixed the problem. Biggest problem was that the new control did not come with the graphics sheet. Had to carefully remove from old control and install on new unit.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Colton from Vernal, UT
-
Parts Used:316490000
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
Oven Probe was not the problem, Had to Replace the OCU
After removing the back and testing the Oven Probe found that it was OK. replaced it anyway. Using a Volt- Ohm meter I found that the K-1 relay was bad (no 220 volts out of the OCU ordered a new one. Your Parts dept.were very helpful with the order. Had to use dental floss (slid it between the original OCU and the benzyl) to remove it. Then stuck it on the front of the new OCU, replaced the board and back,everything worked great. Thank you for the parts help.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1528542
Manufacturer Part Number: 316490000
Manufacturer Part Number: 316490000
Brand
Model Number
Description