GLASS

Followed the instructions in the video. It was very easy to follow - anyone can do this.

As the video showed me to do. It was just things were a little bit different not as easy as the video .I Just Took my time one screw would not work, it was striped, I went too sears bought a $ 31 dollars diamond tip screw driver set it did not work at all. had to bend metal out so I could hack saw screw off, there were a lot more screws then the video showed. but it was just the same as the video take this off then that off clean everything up replace the glass but everything back the way it was one screw at a time. The screw drivers in the hinge thing? Yes I did put them in to remover the door put they did not stay there I needed one of them so i just let the hinge down against it wall of the oven. But before I put back the door,I pulled the two hinges out put the screw drivers back in to hold them out to right angles, just before putting the door back on. so that the door just slips down. By the way I have a hard time fixing anything, but your video made me believe I could do this . It worked thanks! god knows how much you save me.